Baby Lock ARIA Operating instructions

Brand
Baby Lock
Model
ARIA
Type
Operating instructions

This manual is also suitable for

Baby Lock ARIA is a computerized sewing and embroidery machine that offers a wide range of features to help you create beautiful projects. With its large embroidery field, you can stitch out designs up to 8" x 12". The ARIA also comes with a variety of built-in stitches, including decorative, heirloom, and quilting stitches. You can also create your own custom stitches using the machine's stitch creator feature.

The ARIA is easy to use, even for beginners. The large LCD screen provides clear instructions, and the machine's automatic features make it simple to thread the needle, wind the bobbin, and adjust the tension. The ARIA also comes with a built-in needle threader, which makes threading the needle a breeze.

Baby Lock ARIA is a computerized sewing and embroidery machine that offers a wide range of features to help you create beautiful projects. With its large embroidery field, you can stitch out designs up to 8" x 12". The ARIA also comes with a variety of built-in stitches, including decorative, heirloom, and quilting stitches. You can also create your own custom stitches using the machine's stitch creator feature.

The ARIA is easy to use, even for beginners. The large LCD screen provides clear instructions, and the machine's automatic features make it simple to thread the needle, wind the bobbin, and adjust the tension. The ARIA also comes with a built-in needle threader, which makes threading the needle a breeze.

UPGRADING YOUR MACHINE’S SOFTWARE
A-22
You can use USB media or a computer to upgrade software for your sewing machine.
When an upgrade program is available on “ www.babylock.com
”, please download the files following
the instructions on the website and steps below.
Upgrade Procedure Using USB
Media
a
While pressing the “Automatic Threading”
button, turn the main power to ON.
→ The following screen will appear on the LCD.
b
Press .
c
Insert the USB media into the USB port for
media/mouse on the machine. The media
device should only contain the upgrade file.
a USB port for media/mouse
b USB media
d
Press .
→ The upgrade file is loaded.
e
Remove the USB media, and turn the
machine off and on again.
UPGRADING YOUR MACHINE’S SOFTWARE
Note
• When using USB media to upgrade the software, check that no data other than the upgrade file is
saved on the USB media being used before starting to upgrade.
Note
• The access lamp will begin blinking after
inserting USB media, and it will take about 5
to 6 seconds to recognize the media. (Time
will differ depending on the USB media).
Note
• If an error occurs, a red text error message
will appear. When the installation is
performed successfully, following message
will appear.
UPGRADING YOUR MACHINE’S SOFTWARE
Maintenance and Troubleshooting
Appendix A-23
A
1
Upgrade Procedure Using
Computer
a
While pressing the “Automatic Threading”
button, turn the main power to ON.
→ The following screen will appear on the LCD.
b
Press .
c
Plug the USB cable connector into the
corresponding USB ports for the computer
and for the machine.
→ “Removable Disk” will appear in “Computer (My
computer)”.
d
Copy the upgrade file to “Removable Disk”.
→ The following message will appear.
e
When the message disappears, press
.
→ The upgrade file is loaded.
f
Unplug the USB cable, and turn the
machine off and on again.
Note
• If an error occurs, a red text error message
will appear. When the installation is
performed successfully, following message
will appear.
  • Page 1 1
  • Page 2 2

Baby Lock ARIA Operating instructions

Brand
Baby Lock
Model
ARIA
Type
Operating instructions
This manual is also suitable for

Baby Lock ARIA is a computerized sewing and embroidery machine that offers a wide range of features to help you create beautiful projects. With its large embroidery field, you can stitch out designs up to 8" x 12". The ARIA also comes with a variety of built-in stitches, including decorative, heirloom, and quilting stitches. You can also create your own custom stitches using the machine's stitch creator feature.

The ARIA is easy to use, even for beginners. The large LCD screen provides clear instructions, and the machine's automatic features make it simple to thread the needle, wind the bobbin, and adjust the tension. The ARIA also comes with a built-in needle threader, which makes threading the needle a breeze.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents