Viking Range DDBB536 Operating instructions

Brand: Viking Range

Model: DDBB536

Type: Operating instructions

This manual is also suitable for

Side Panel Support Instructions

Viking Part Number-F90752

Released-1/20/2005, Revision-1 Page 1

NOTE: This instruction sheet only refers to the PSSPL3 and

DSSPL3 series side panel kits.

1) Align side panel support with top and bottom cabinet edges.

Side panel support aligned with top cabinet edge

Side panel support aligned with bottom cabinet edge

Side Panel Support Instructions

Viking Part Number-F90752

Released-1/20/2005, Revision-1 Page 2

NOTE: The Side Panel Support is manufactured to fit on the left rear

corner of the unit. The Side Panel Support should be aligned with the

rear of the unit.

2) Using the side panel support holes as a template, drill (7) holes

into the side of the unit with a 9/64” (.36 cm) diameter drill bit.

3) Attach side panel support to the unit with #8 sheet metal screws

provided.

Side panel support aligned with rear of the unit

Side Panel Support Instructions

Viking Part Number-F90752

Released-1/20/2005, Revision-1 Page 3

4) Position and engage side panel with the side trim toward the front

of the unit. Position rear of side panel with the rear of the unit.

Hole location for side panel support

Hole location for side panel support

Side Trim (Professional Shown)

Side Panel Support Instructions

Viking Part Number-F90752

Released-1/20/2005, Revision-1 Page 4

5) Attach rear of side panel into pre-drilled holes on side panel

support.

Pre-drilled holes for attaching side panel

1
2
3
4

Viking Range DDBB536 Operating instructions

Brand: Viking Range

Model: DDBB536

Type: Operating instructions

This manual is also suitable for

Related papers

Other documents