BevLes, Inc. RA35-ES24-FL4 Datasheet

BevLes, Inc.
Brand
BevLes, Inc.
Model
RA35-ES24-FL4
Type
Datasheet

This manual is also suitable for

BevLes, Inc. RA35-ES24-FL4 is a heavy-duty slicer/mixer stand that can be used in both commercial and residential kitchens. It is made of aluminum and stainless steel, making it easy to clean and resistant to rust. The stand has a marine edge around the top to prevent spills from reaching the floor. It also has a variety of features that make it a versatile and useful tool in the kitchen.

The stand has a 24-inch wide by 35-inch high work surface that is perfect for slicing, mixing, and other food preparation tasks. It also has a covered storage area underneath that can be used to store pans, utensils, or other kitchen supplies. The stand is also equipped with five-inch polyurethane casters that make it easy to move around the kitchen. The casters also have floor locks to keep the stand in place when in use.

BevLes, Inc. RA35-ES24-FL4 is a heavy-duty slicer/mixer stand that can be used in both commercial and residential kitchens. It is made of aluminum and stainless steel, making it easy to clean and resistant to rust. The stand has a marine edge around the top to prevent spills from reaching the floor. It also has a variety of features that make it a versatile and useful tool in the kitchen.

The stand has a 24-inch wide by 35-inch high work surface that is perfect for slicing, mixing, and other food preparation tasks. It also has a covered storage area underneath that can be used to store pans, utensils, or other kitchen supplies. The stand is also equipped with five-inch polyurethane casters that make it easy to move around the kitchen. The casters also have floor locks to keep the stand in place when in use.

Options & Accessories
• Corner bumpers
• Full perimeter bumper
• Vertical pan stop
• 5” polyurethane casters
Warranty & Cerifications
Parts and Service Warranty
• Protected by BevLes 2 year parts and 1
year service warranty
Certified by the following:
SLICER / MIXER
Heavy-Duty Stands
Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
(800) 441-1601 • Fax: (214) 565-0976 • www.bevles.com • [email protected]
Design Features
• A combination of aluminum and stainless
steel makes this slicer/mixer stand
especially useful in institutional food-
service applications
• Dual purpose stand serves as a work
counter while providing a covered storage
area
• Stainless steel top is provided with a
marine edge to assist in preventing any
spillage from reaching the floor
• Selective spacing on 1½” or 1” centers
• Four floor locks guarantee stability during
slicing or other rigorous usage
Quality Construction
• Aluminum construction with marine edged
stainless steel work top
• Interlocking extruded panels form easy to
clean side walls that support 18” x 26”
pans on 1½” centers
• Top frame consists of 1½” square tube
heliarc welded at corners
• One piece .190 aluminum base
• 1½” x 1½” angle uprights are welded to
.190 base and top frame
• 5” heavy-duty plate-type neoprene casters
are bolted to base
Models: RA35-ES16-FL4 RA35-ES24-FL4
Mailing: 729 Third Ave., Dallas, TX 75226 • Shipping: 1938 Wyott Dr., Cheyenne, WY 82007
(800) 441-1601 • Fax: (214) 565-0976 • www.bevles.com • [email protected]
* Note: Modifications involving casters or legs may affect height of equipment. Specifications subject to change without notice.
SLICER / MIXER
Heavy-Duty Stands
Construction
• Top frame consists of durable 1½” square
tube heliarc welded at all corners
• Base is .190 aluminum
• Uprights are 1½” x 1½” extruded angle
welded to base and top frame
• Sides consist of interlocking extruded panels
• Work top is 20 ga. stainless steel with
marine edge
Pan Supports
• Extruded panels with 9/16” wide ledges on
1½” centers to lip support 18” x 26” pans
Casters
• Heavy-duty plate-type casters, all swivel
with neoprene wheels
• Four 5” floor locks
Shipping
• Freight Class: 250
• FOB: Cheyenne, WY 82007
FRONT
SIDE
W
D
H
Model
Capacity Dimensions
Ship Wt. Act. Wt.
18x26 12x20 SPC’G H W D
RA35-ES16-FL4 16 --- 1½” 35” (88.9 cm) 21.5” (54.6 cm) 26” (66 cm) 85 lbs (38.6 kg) 70 lbs (31.8 kg)
RA35-ES24-FL4 24 --- 1” 35” (88.9 cm) 21.5” (54.6 cm) 26” (66 cm) 89 lbs (40.4 kg) 74 lbs (33.6 kg)
6/20/05
#B510
Models: RA35-ES16-FL4 RA35-ES24-FL4
  • Page 1 1
  • Page 2 2

BevLes, Inc. RA35-ES24-FL4 Datasheet

BevLes, Inc.
Brand
BevLes, Inc.
Model
RA35-ES24-FL4
Type
Datasheet
This manual is also suitable for

BevLes, Inc. RA35-ES24-FL4 is a heavy-duty slicer/mixer stand that can be used in both commercial and residential kitchens. It is made of aluminum and stainless steel, making it easy to clean and resistant to rust. The stand has a marine edge around the top to prevent spills from reaching the floor. It also has a variety of features that make it a versatile and useful tool in the kitchen.

The stand has a 24-inch wide by 35-inch high work surface that is perfect for slicing, mixing, and other food preparation tasks. It also has a covered storage area underneath that can be used to store pans, utensils, or other kitchen supplies. The stand is also equipped with five-inch polyurethane casters that make it easy to move around the kitchen. The casters also have floor locks to keep the stand in place when in use.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents