Gold's Gym Max Pack
The Gold's Gym Max Pack is a resistance system accessory designed to increase the amount of resistance available on Gold's Gym Power Flex resistance systems. The Max Pack provides progressive resistance, meaning that as the bands begin to stretch, the amount of resistance will increase gradually. As the bands stretch further, the resistance will increase rapidly.
The Max Pack is easy to assemble and use. Simply plug the sensor into the indicated hole in the Back Mech Cover, remove the two Screws and the two Cover Panels from the Mech Covers, and attach the four Band Axles to the Mech Covers. Slide the four Bushings onto the Band Axles, and slide the Bands onto the Band Axles. Secure the Bands with the four Spring Clips.
Gold's Gym Max Pack
The Gold's Gym Max Pack is a resistance system accessory designed to increase the amount of resistance available on Gold's Gym Power Flex resistance systems. The Max Pack provides progressive resistance, meaning that as the bands begin to stretch, the amount of resistance will increase gradually. As the bands stretch further, the resistance will increase rapidly.
The Max Pack is easy to assemble and use. Simply plug the sensor into the indicated hole in the Back Mech Cover, remove the two Screws and the two Cover Panels from the Mech Covers, and attach the four Band Axles to the Mech Covers. Slide the four Bushings onto the Band Axles, and slide the Bands onto the Band Axles. Secure the Bands with the four Spring Clips.
Gold's Gym Max Pack
The Gold's Gym Max Pack is a resistance system accessory designed to increase the amount of resistance available on Gold's Gym Power Flex resistance systems. The Max Pack provides progressive resistance, meaning that as the bands begin to stretch, the amount of resistance will increase gradually. As the bands stretch further, the resistance will increase rapidly.
The Max Pack is easy to assemble and use. Simply plug the sensor into the indicated hole in the Back Mech Cover, remove the two Screws and the two Cover Panels from the Mech Covers, and attach the four Band Axles to the Mech Covers. Slide the four Bushings onto the Band Axles, and slide the Bands onto the Band Axles. Secure the Bands with the four Spring Clips.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI