SP6723 5/3/09 9:33 PM Page 3
• Do not use with damaged cord, plug or
other parts.
• Keep cord away from heated surfaces.
• Do not handle plug or the Air Blower
with wet hands.
• Use only on GFCI protected outlets.
• Do not use an extension cord with this
Air Blower.
Do not lift Air Blower using the
retractable handle.
• Do not use retractable handle and
wheels for going up and down stairs.
• Do not operate this machine near
flammable or combustible liquids,
gases, or explosive dusts like gasoline
or other fuels, lighter fluid, cleaners, oil-
based paints, natural gas, hydrogen,
coal dust, magnesium dust, grain dust,
or gun powder.
• Do not use or store near hazardous or
toxic materials.
If your Air Blower is not working as it
should, has missing parts, has been
dropped, damaged, left outdoors, or
dropped into water, return it to any
Sears store, Sears Service Center, or
other Craftsman outlet.
Do not put any object into ventilation
openings. Do not operate with any
ventilation openings blocked; keep free
of dust, lint, hair or anything that may
reduce air flow.
• Keep hair, loose clothing, fingers, and
all parts of body away from openings
and moving parts.
• Do not allow to be used as a toy. Close
attention is necessary when used near
children.
Do not use as a hand truck.
To reduce the risk of eye injury, wear
safety eyewear. The operation of any
utility Vac or blower can result in foreign
objects being blown into the eyes, which
can result in severe eye damage.
READ AND SAVE THESE INSTRUCTIONS
Motor Specifications and
Electrical Requirements
110-120 Volt, 60 Hz. Air Blower
Information
WARNING: To reduce the risk of
electric shock:
• Connect to an outlet with a GFCl
protected device.
• Do not use an extension cord with
this fan.
The plug supplied on your Air Blower may
not fit into the outlet you are planning to
use. Your local electrical code may require
slightly different power cord plug
connections. If these differences exist
refer to and make the proper adjustments
per your local code before your toot is
plugged in and turned on.
In the event of a malfunction or
breakdown, grounding provides a path of
least resistance for electric current to
reduce the risk of electric shock. This Air
Blower is equipped with an electric cord
having an equipment-grounding conductor
and a grounding plug. The plug must be
plugged into a matching outlet that is
properly installed and grounded in
accordance with all local codes and
ordinances.
Do not modify the plug provided. If it wilt
not fit the outlet, have the proper outlet
installed by a qualified electrician.
If power cord is worn or cut, or damaged in
any way, have it replaced immediately by
a qualified electrician.