Mode d'Emploi MODEL 2004 User manual

Brand
Mode d'Emploi
Model
MODEL 2004
Category
Bridge cameras
Type
User manual

This manual is also suitable for

REC VIEW
SHUTTER SOUND
ENGLISH
ON
SCREEN
SETUP
1
1
EXIT SELECT
GO
BACK
OK
FLASH MODE
OFF
AUTO
RESET
P
P
EXIT SELECT
GO
BACK
OK
SH
3M
SCENE SELECT
Lift up the cover and push down
firmly on the section of the cover
to close. Closing the battery/card
compartment cover locks the latch.
Gently push the latch backwards to lift it .
When you take your finger off the latch, the
latch drops back on its own . After the
latch drops back, insert the battery .
Slide the battery/card compartment
cover in the direction of the arrow
. The cover unlocks and opens in
the direction of the arrow .
a.
UNPACKING THE BOX CONTENTS
PREPARE THE CAMERA FOR USE
Before you begin using your Olympus digital camera…
TURNING ON THE CAMERA
Loading the battery
Names of parts
a.
Power on/off
c.
Inserting the card
b.
Charging the battery
Printed in Japan
Monitor
Power on T Turns on the monitor.
Power off T Turns off the monitor.
1
Lens cap
Remove this when taking
pictures.
Mode switch
: Select this for still pictures shooting.
: Select this for movie shooting.
: Select this for playback.
2
POWER switch
Turns the camera on and off.
* Check the date/time settings
when the camera is turned on.
3
b.
Menu & operation (date and time setting)
1) Display the menu.
The current setting is displayed.
Indicates there are more menu items
following SHUTTER SOUND.
Select the date format: [Y-M-D (Year/Month/Day)],
[M-D-Y (Month/Day/Year)], [D-M-Y (Day/Month/Year)].
The operation guide is displayed.
2) Select SETUP.
3) Select from the SETUP menu.
4) Set the date/time.
Set the date.
The “year” is highlighted. The first two digits of the
year are fixed.
Repeat the procedure until the date and
time are completely set.
The time is displayed in the 24-hour format.
For example, 2 p.m. will be displayed as 14:00.
5) With the cursor on SET, press MENU/OK.
The clock starts after completing step 5 .
The following instructions show the procedure used when the
date and time settings are set to Y-M-D.
Currently selected item
1
1
2
3
6
7
4
5
2
Insert the battery with the
OLYMPUS logo face up.
Battery/Card
compartment cover
Shutter button
Control dial
Flash
Microphone
Lens
Cradle connector
Connector end
Cradle
(provided)
DC-IN jack
A/V OUT jack
USB connector
Tripod socket
Battery/Card compartment
cover
Self-timer lamp
Strap eyelet
BACK/NEXT button
Mode switch
( / / )
POWER switch
Monitor
MENU/OK button
Speaker
Zoom button
(W /T )
Latch
To the AC wall outlet
AC plug
Monitor
AC adapter (provided)
Notch
Cradle (provided)
DC-IN jack
blinks during charging.
Unloading the battery
Release the latch . With the
battery held down, tilt the camera
carefully so that the battery does
not drop from the camera.
Remove the battery .
● Insert the card while keeping it
straight.
● When the card is inserted
all the way, it stops with a click.
5
4
5
Removing the card
Push the card all the way to
unlock it, then let it return
slowly. Hold the card straight
and pull it out.
5
3
7
6
4
3
4
3
http://www.olympus.com/
QuickStart Guide
Olympus Europa GmbH
Wendenstrasse 14-18,
20097 Hamburg, Germany
http://www.olympus-europa.com
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville,
NY 11747-3157, U.S.A.
http://www.olympusamerica.com/support
START HERE
It is strongly recommended that you follow these
step-by-step numbered instructions to set up and
quickly begin using your new Digital Camera.
For more detailed instructions on advanced features,
please refer to the Reference Manual
*1
.
*1 Reference Manual is provided on CD-ROM in some
areas.
Gather your digital camera and the parts as shown in the illustration. You’ll need these to complete the steps for the camera set-up
procedures that follow.
The following items are also included in this package: lens cap, lens cap string, camera case (with camera cleaning cloth), warranty card and registration card (not
pvovided in some areas).
*1
Reference Manual is provided on CD-ROM in some areas.
*2 The instruction manual included on the CAMEDIA Master 4.2 CD-ROM is provided in English only.
Digital camera
Strap
AC adapter (D-7AC)
Lithium-ion battery (LI-20B)
Reference Manual
*1
CAMEDIA Master CD-ROM
*2
/
Software installation guide
xD-Picture Card/Instructions
USB cable
AV cable
Cradle
Open the battery/card
compartment cover.
Release the latch
to insert the battery.
Close the battery/
card compartment
cover.
Rotate to
select
MENU/OK
Press to confirm
P
SETUP
AF MODE
OFF
SPOT
EXIT SELECT
GO
BACK
OK
FORMAT
Rotate to
select
Rotate to
select
MENU/OK
Press to confirm
Rotate to
select
MENU/OK
Press to confirm
VIDEO OUT
SETUP
’04.01.01
00:00
PAL
EXIT SELECT
GO
BACK
OK
Y
M D
01
00 00
012004
SET
CANCEL SELECT
GO
BACK
OK
Rotate to
select
MENU/OK
Press to confirm
Rotate to
select
MENU/OK
Press to confirm
MENU/OK
Press to confirm
01
00 00
01
SET
CANCEL SELECT
GO
BACK
OK
07 30
SET
12 00
CANCEL SELECT
GO
BACK
OK
07 30
SET
12 15
CANCEL
GO
BACK
OK
DIGITAL MODEL 2004
3
4
5
1
2
MENU/OK
Press
VT926801
LANDSCAPE
1
SELECT
GO
OK
SIZE :2048x1536
100–0010
’04.01.01.00:00
10
0.0
3M
FILEFILE
NEXT
SH
JUMP
a.
Turning on the camera in the
shooting mode
b.
Zooming
Using the situation-related shooting modes
c.
Taking the picture
TAKING PICTURES
P
3
4
21
7
8
9
5
6
SH
3
M
1 Flash stand-by/
Flash charging mark
2 Battery check
3 Shooting modes
4 Green lamp
5 Record mode
6 AF target mark
7 Card access mark
8 Memory gauge
9 Number of storable still pictures
Shutter button
Currently selected mode
W
T
P
W
T
P
SH
3
M
SH
3
M
Position the AF target mark on the subject
you want to focus on. Adjust the focus.
Press the shutter button gently (halfway).
Lights steadily when the focus is locked.
Lights when the flash fires.
Release the shutter.
Press the shutter button all the way (fully).
When the mode switch is set to , you can record movies.
Pressing the shutter button optimizes the settings for the selected shooting
mode, such as NIGHT SCENE, CUISINE and SPORT, etc.
Still picture
1 Battery check
2 File number
3 Record mode
4 Resolution
5 White balance
6 Exposure compensation
7 Date/time
8 Frame number
9 Operation guide
Still image
1) Select SCENE SELECT, then SCENE in the menu.
2) Select the situation-related shooting mode.
a.
Turning on the camera in the
play mode
b.
Selecting images
Close-up playback
Index display
c.
Erasing pictures [ ERASE]
VIEWING AND
ERASING IMAGES
1
3
4
5
6
7
8
9
2
Displays the previous image.
Displays the next image.
Pressing BACK/NEXT switches the playback method between the
one-by-one mode and the 10-frame jump mode.
Press the zoom button to enlarge it.
Press the zoom button to return to the original size (1x).
1) Select ERASE in the menu.
2) Select THIS IMAGE.
3) Select YES.
Press the zoom button . Rotate the control dial to move
the frame to the desired image.
Press the zoom button . The screen returns to single-frame playback.
CONNECTING THE CAMERA
TO A COMPUTER
You can connect your camera to a computer with the USB cable and transfer images stored on
a card to the computer.
a.
Windows 98 users must install the “USB Driver for
Windows 98” software before connecting this
digital camera to the computer.
1) Insert the provided software CD into your CD-ROM drive. The menu is displayed.
2) Select [USB driver].
2) Insert the provided USB cable into the USB connector on the cradle.
3) Attach the camera to the cradle.
● The selection screen for the USB connection is displayed on the
camera’s monitor.
4) Select [PC] and press MENU/OK.
● The computer recognizes the camera as a new
device.
TIP:
Non-Windows 98/98SE users, start at Step b.
TIP:
To ensure a consistent power
supply when downloading
images, Olympus recommends
using the AC adapter.
To use advanced features
For details on the
camera’s features
and operations...
Refer to the Reference Manual.
● More than 20 scene modes to suit a wide range of
shooting situations.
● Movie recording capability.
● Telephoto shooting with optical zoom and digital
zoom.
● Direct printing on a PictBridge-compatible printer.
● Image can be transferred to a computer for editing
and storage.
● Image management for grouping photos or
creating photo albums.
Viewing images
shot on a PC...
The provided software CD
includes Olympus CAMEDIA Master
software for viewing and
editing images.
● Install “CAMEDIA Master”.
● Complete the on-line user registration. Make
sure that your PC is communicating with the
Internet before submitting the registration.
● “Ferrari Photo Collection” is included with
CAMEDIA Master.
● Makes it easy to edit your digital photos.
© 2004 OLYMPUS CORPORATION
Press
Press
Rotate to
select
MENU/OK
Press to confirm
Rotate to
select
MENU/OK
Press to confirm
MENU/OK
Press to confirm
MENU/OK
Press to confirm
Rotate to
select
Rotate to
select
Rotate to
select
MENU/OK
Press to confirm
Rotate to
select
MENU/OK
Press to confirm
Rotate to
select
MENU/OK
Press to confirm
100–0015
’04.01.01.00:00
15
3M
FILEFILE
NEXTNEXT
SH
JUMP
LANDSCAPE
1
For shooting
landscapes.
Vivid reproduction
of blues and greens.
SCENE SELECT
FLASH MODE
OFF
AUTO
RESET
P
P
SH
3M
EXIT SELECT
GO
BACK
OK
PROGRAM AUTO
SCENE
SCENE SELECT
P
EXIT SELECT
GO
BACK
OK
THIS IMAGE
SEL. IMAGE
ERASE
CANCEL SELECT
GO
BACK
OK
YES
NO
SELECT
GO
OK
ERASE
b.
Connecting the camera to the
computer
1) Insert the marked end of the provided
USB cable into the USB port on your
computer.
USB cable
USB port
Look for this mark.
USB
PC
END
PRINT
SELECT
GO
OK
  • Page 1 1
  • Page 2 2

Mode d'Emploi MODEL 2004 User manual

Brand
Mode d'Emploi
Model
MODEL 2004
Category
Bridge cameras
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents