Freestyle Navigator 2.0 User manual

Category
Watches
Type
User manual
ENGLISH
NAVIGATOR 2.0
S1
S2
S4
S3
CONTROL BUTTONS
S1.Start/stopbutton
S2.Lap/resetbutton
S3.Modebutton
S4.Lightbutton
DISPLAY MODES:
Thewatchhassixdisplaymodes:
HOMETIME/FOREIGNTIME(TM2),
COMPASS(COMP),CHRONOGRAPH
(CHR),RECALL(RCL),TIMER(TMR)
andALARM(ALM).
Tochangefromonedisplaymodeto
another,pressS3buttononce.The
modedescriptionwillappearfor
around2secondsbeforetheselected
modeisactivated.
NOTE:Inanysettingmode,ifthereis
nokeymanipulationforaround1-2
minutes,thewatchwillautomatically
savetheentereddataandexitthe
settingmode.
HOME AND FOREIGN TIME DISPLAY:
TodisplayFOREIGNTIMEmode,press
S1buttonwhenHOMETIMEmodeis
displayed.Themodedescription(TM2)
willbedisplayed.Tochangebackto
HOMETIMEmode,pressS1button
again.
TO SET THE TIME AND CALENDAR:
1. PressS3buttontoselectHOME
TIME/FOREIGNTIMEmode.
2. PressandholdS2buttonfor
around2seconds.Thesecond
digitswillblink.
3. PressS1buttontoresetthesecond
digitstozero.
4. PressS3button,theminutedigits
willblink.
5. PressS1buttontosettheminute
digits.Holdingdownthebuttonwill
speeduptheprocess.
6. PressS3button,thehourdigitswill
blink.
7. PressS1buttontosetthehour
digits.Holdingdownthebuttonwill
speeduptheprocess.
8. Followthesamepatterntosetthe
hourformat,date,month,year,
hourlychimeoptionandbutton
beepoption.
9. Tosetthehourformat,pressS1
buttontotogglebetween12-hour
and24-hourformat.TheP.M.indi-
catormaybedisplayedtoindicate
thetimeperiod12:00A.M.–11:59
P.M.in12-hourformat.
10.Tosetthehourlychimeoption,
pressS1buttontoturnitONor
OFF.
11.Tosetthebuttonbeepoption,press
S1buttontoturninONorOFF.
12.Afternishedmakingalltheset-
tings,pressS2buttontoconrm.
NOTE:Theday(oftheweek)is
automaticallysetinaccordancewith
thedate.Thedatecanbesetwithin
therangeof1January2008to31
December2099.
NOTE:InFOREIGNTIMEsettings,only
thehourdigitsandminutedigitsare
opentosetting.Allothersettingsare
synchronizedbetweenHOMETIMEand
FOREIGNTIMEmode.
TO USE THE COMPASS:
PressS3buttontoselectCOMPASS
mode.Thecurrenttimewillbe
displayedforaround0.5second,then
therelativecompasspointandangular
bearingwillbedisplayed.
NOTE:Thismovingpointerrepresents
thedirectionofNorth(N).
NOTE:Ifthereisnokeymanipulation
for20seconds,thecompasssensor
willbedeactivatedforpowersaving
andthewatchwilldisplayonlythe
currentHOMETIMEorFOREIGNTIME
(dependsonyourselectionintime
mode).PressS1buttontore-activate
thecompasssensor.
NOTE:Ifthecompassdoesnotseem
toworkwell,forexample:whenit
displaysthewrongcompassdirection
oritdisplays“DIST”(distort)onthe
screen,thenyouhavetocalibratethe
compass.Youshouldalsocalibrate
itafterreplacingthebattery.Ifyour
watchhasbeenexposedtostrong
electromagneticelds,suchaselectric
lines,magnetsorloudspeakers,then
youhavetocalibrateitagain.Please
alsocalibratethecompassbefore
usingitforthersttimeandbeforea
longtrip.
NOTE:Becauseofthedifferencebe-
tweentrueNorthandmagneticNorth,
youhavetocompensateitbyadjusting
thecompassdeclination.Thedeclina-
tionangleforyourlocalareamaybe
foundbelow:
City Declination
 Angle

Anchorage 22E
Atlanta 4W
Bombay 1W
Boston 16W
Calgary 18E
Chicago 3W
Denver 10E
Jerusalem 3E
London 4W
LittleRock 3E
Livingston,MT 14E
Munich 1E
NewYorkCity 14W
Orlando 5W
Oslo 2W
Paris 2W
RioDeJaneiro 21W
SanFrancisco 15E
Seattle 19E
Shanghai 5W
Toronto 11W
Vancouver 20E
WashingtonDC 10W
Waterbury,CT 14W
TO SET THE DECLINATION ANGLE:
InCOMPASSmode,
1. PressandholdS2buttonfor
around 2seconds
toenterintoCALmode.
2. PressS3button,thedeclination
anglewillblink.
3. PressS1orS3buttontosetthe
declinationangle.Holdingdownthe
buttonwillspeeduptheprocess.
4. Afternishedmakingallsettings,
pressS2buttontoreturntoCOM-
PASSmode.
TO CALIBRATE THE COMPASS:
InCOMPASSmode,
1. PressandholdS2buttonfor
around 2seconds
toenterintoCAL(cali-
bration)mode.
2. PressS1button,thepointerswill
begintorotateclockwise.
3. Rotatethewatchhorizontallyin
clockwisedirectionslowlyforat
least2rotations,takingatleast15
secondsperrotation.
4. PressS1buttonorleavethewatch
idlefor60secondstoconrmthe
calibrationprocess,orpressS2
buttonorS3buttontoabortthe
calibrationprocess.
TO USE THE CHRONOGRAPH:
1. PressS3buttontoselectCHRONO
GRAPHmode.
2. Thechronographwillthenbe
displayedinitscurrentstatus–
reset,runningorstopped.
3. Toresumeacounting,pressS1
buttontoresumefromwhereitleft
off.
4. Tostartanewcounting,resetthe
chronographtozerorst.PressS1
buttontostopcounting,then
pressandholdS2buttonforaround
2secondstoreset.
Forthemeasurementofelapsedtime,
InCHRONOGPRAHmode,
1. PressS1buttontostartcounting.
2. Tostopcounting,pressS1button.
PressS1buttontoresumefrom
whereitleftoff.
3. Toresettozero,pressS1buttonto
stopcountingandthenpressand
holdS2button.
Forthemeasurementofsplittime,
InCHRONOGRAPHmode,
1. PressS1buttontostartcounting.
2. Whilethechronographisrunning,
pressS2buttononcetoregistera
lap.Thelapnumberandlaptime
oftheregisteredlapwillbe
displayed.Thechronographisstill
runninginthebackground.
Afteraround10seconds,thelap
numberandsplittimeofthecur
rentlapwillbedisplayed.
3. Repeatthelaststepuntilallthe
lapshavebeenregistered.
4. Tostopcounting,pressS1button.
PressS1buttontoresumefrom
whereitleftoff.
5. Toresettozero,pressS1buttonto
stopcounting,thenpressandhold
S2buttonforaround2seconds.
NOTE:Thewatchcanregisterand
recorduptoamaximumof30laps.
NOTE:Thechronographcancountup
toamaximumof99hours,59minutes
and59.99seconds.
NOTE:Youcanleavethechronograph
runningwhileswitchingovertoother
operatingmodes.
Toreducecarbonfootprint,these
Freestyleinstructionsareprintedwith
soyinksonrecycledpaper.
ENGLISH
TO USE THE RECALL FUNCTION:
1. PressS3buttontoselectRECALL
mode.
2. PressS1buttontoscrollthrough
therecordedindividuallaptimeand
totalelapsedtime.
NOTE:Therecallfunctionisavailable
onlywhenthereislaprecord.The
message“NOLAPS”willbedisplayed
ifthereisnolaprecord.
NOTE:Thelaprecordwillbecleared
whenthechronographisreset.
TO SET THE TIMER:
1. PressS3buttontoselectTIMER
mode.
2. PressandholdS2buttonfor
around2seconds,thetimerselec
tionwillblink.
3. PressS1buttontotogglebetween
timerinterval1andtimerinterval2
toset.
4. PressS3button,theseconddigits
willblink.
5. PressS1buttontosetthesecond
digits.Holdingdownthebuttonwill
speeduptheprocess.
6. PressS3button,theminutedigits
willblink.
7. PressS1buttontosettheminute
digits.Holdingdownthebuttonwill
speeduptheprocess.
8. PressS3button,thehourdigitswill
blink.
9. PressS1buttontosetthehour
digits.Holdingdownthebuttonwill
speeduptheprocess.
10.PressS3button,theaction-at-end
selectionwillblink.
11.PressS1buttontoselectamongCS
(CountStop),CR(CountRepeat)
andCCU(CountUp).
12.Afternishedmakingalltheset-
tings,pressS2buttontoconrm.
NOTE:Illustrationoftheaction-at-end
selections:
a) CS(CountStop)–thetimerwill
stopwhenthecountdownteaches
zero.
b) CR(CountRepeat)–thetimer
willrepeatthecountdownwhenthe
countdownreacheszero.
c) CCU(CountUp)–thetimercount
uptoamaximumof23hours59
minutesand59secondswhenthe
countdownreacheszero.
NOTE:Thetimercannotbeactivated
ifthevalueoftimerinterval1isset
as0:0’00”.
TO USE THE TIMER:
1. PressS3buttontoselectTIMER
mode.
2. Thetimerwillbedisplayedinits
currentstate–reset,running,or
stopped.
3. Toresumeacounting,pressS1
buttontoresumefromwhereitleft
off.
4. Tostartanewcounting,reloadthe
timerrst.
PressS1buttontostopcounting
andthenpressS2button.
5. Afterreachingzeroinacountdown,
atunewillbeemitted.Tostopthe
tune,pressanybutton.
NOTE:Youcanleavethetimerrunning
whileswitchingovertootheroperating
modes.
TO SET THE ALARM:
1. PressS3buttontoselectALARM
mode.
2. PressS2buttontoselectamong
alarmentries1,2and3toset.
3. PressandholdS2buttonforaround
2seconds.Theminutedigitswill
blink.
4. PressS1buttontosettheminute
digits.Holdingdownthebuttonwill
speeduptheprocess.
5. PressS3button,thehourdigitswill
blink.
6. PressS1buttontosetthehour
digits.Holdingdownthebuttonwill
speeduptheprocess.
7. PressS3buttonthealarmfre
quencywillblink.
8. PressS1buttontoselectamong
daily(DLY)andindividualday(of
theweek)only–Sunday(SUN),
Monday(MON,Tuesday(TUE),
Wednesday(WED),Thursday(THU),
Friday(FRI)andSaturday(SAT).
9. Afternishedthesettings,pressS2
buttontoconrm.
NOTE:Thealarmwillautomaticallybe
activatedafterbeingset.
NOTE:Thealarmwillworkaccording
toHOMETIMEorFOREIGNTIME(de-
pendsonyourselectionintimemode).
TO USE THE ALARM:
InALARMmode,
1. PressS2buttontoselectamong
alarmentries1,2and3toset.
2. PressS1buttontoactivatethe
alarm.Thealarmindicator
will
bedisplayed.
3. PressS1buttonagaintodeactivate
thealarm.Themessage“OFF”will
bedisplayed.
WHEN AN ALARM GOES OFF:
A20-secondalarmtunewillbeemitted
atthedesignatedtimewhenthealarm
isactivated.Tostopthetune,press
anybutton.
TO USE THE BACKLIGHT:
PressS4buttontoturnontheback-
lightforaround3seconds.
BEZEL-ACTIVATED BACKLIGHT
FUNCTION:
1. PressandholdS4buttonforaround
3secondsactivatedordeactivate
thebezel-activatedbacklightfunc-
tion.
2. Whenthefunctionisactivated,the
lightbulbicon willbedisplayed.
Youcanthenturnonthebacklight
foraround3secondsbytouching
thebezelofthewatch.
NOTE:Tousethebezel-activated
backlightfunction,thecasebackofthe
watchmustbeindirectcontactwith
yourskinduringwear.
LOW BATTERY DETECTION:
Whenthebatteryofthewatchisclose
todepletion,thebatterylowindicator
willbedisplayed.
FS8127-NAVIGATOR2.0-1067-MR01
  • Page 1 1
  • Page 2 2

Freestyle Navigator 2.0 User manual

Category
Watches
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI