Kenwood LZ-612IR User manual

Category
Car video systems
Type
User manual
© B64-4655-08/00 (W)
LZ-612IR
WIDE TOUCH SCREEN MONITOR
INSTRUCTION MANUAL
MONITEUR ECRAN LARGE TACTILE
MODE D’EMPLOI
BREITBILD-BERÜHRUNGSBILDSCHIRM
BEDIENUNGSANLEITUNG
BREEDBEELD MONITOR MET AANRAAKSCHERM
GEBRUIKSAANWIJZING
MONITOR TOUCH SCREEN PANORAMICO
ISTRUZIONI PER L’USO
MONITOR DE PANTALLA TÁCTIL PANORÁMICA
MANUAL DE INSTRUCCIONES
MONITOR DE ECRÃ LARGO DE TOQUE
MANUAL DE INSTRUÇÕES
ШИРОКОФОРМАТНЫЙ МОНИТОР С СЕНСОРНЫМ ЭКРАНОМ
ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ
摸宽屏显示器
使用说明书
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new monitor.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model LZ-612IR Serial number
US Residents Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com
1-LZ-612IR_ENG_0405.indd 1 2010-04-05 �� 5:11:57
2
|
LZ-612IR
WARNING
To prevent injury or re, take the following
precautions:
• Topreventashortcircuit,neverputorleaveany
metallic objects (such as coins or metal tools) inside
the unit.
• Donotwatchorfixyoureyesontheunitsdisplay
whenyouaredrivingforanyextendedperiod.
• Mountingandwiringthisproductrequiresskillsand
experience.Forsafetyssake,leavethemounting
and wiring work to professionals.
• DonottouchtheliquidcrystalfluidiftheLCDis
damagedorbrokenduetoshock.Theliquidcrystal
fluid may be dangerous to your health or even fatal.
IftheliquidcrystalfluidfromtheLCDcontactsyour
body or clothing, wash it off with soap immediately.
• Thismonitorunitissetforrearpassengeruseonly.
Use of this monitor unit in any front seat and/or
where it may be visible to the driver may be illegal
in some states and may cause driver distraction and
accident, resulting in injury or death.
CAUTION
To prevent damage to the machine, take
the following precautions:
• Makesuretogroundtheunittoanegative12VDC
power supply.
• Donotinstalltheunitinaspotexposedtodirect
sunlightorexcessiveheatorhumidity.Alsoavoid
places with too much dust or the possibility of
water splashing.
• Whenreplacingafuse,onlyuseanewfusewith
the prescribed rating. Using a fuse with the wrong
rating may cause your unit to malfunction.
• Donotuseyourownscrews.Useonlythescrews
provided. If you use the wrong screws, you could
damage the unit.
How to Reset Your Unit
• Iftheunitfailstooperateproperly,presstheReset
button.Theunitreturnstofactorysettingswhenthe
Reset button is pressed.
Reset button
• EveniftheResetbuttonispressed,valuesset
forindividualitemsarenotcleared.Toinitialize
set values, perform the operation mentioned in
<Settings> (page 6).
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with
a cloth moistened with neutral cleaner, then wipe it
again with a clean soft dry cloth.
• Applyingspraycleanerdirectlytotheunitmayaffectits
mechanicalparts.Wipingthefaceplatewithahardclothor
usingavolatileliquidsuchasthinneroralcoholmayscratch
the surface or erases characters.
Screen brightness during low temperatures
Whenthetemperatureoftheunitfallssuchasduring
winter,theliquidcrystalpanel’sscreenwillbecome
darker than usual. Normal brightness will return after
using the monitor for a while.
• Ifyouexperienceproblemsduringinstallation,
consult your Kenwood dealer.
• Whenyoupurchaseoptionalaccessories,checkwith
your Kenwood dealer to make sure that they work
with your model and in your area.
• Theillustrationsofthedisplayandthepanel
appearinginthismanualareexamplesusedto
explainmoreclearlyhowthecontrolsareused.
Therefore,whatappearsonthedisplayinthe
illustrations may differ from what appears on the
displayontheactualequipment,andsomeofthe
illustrations on the display may represent something
impossible in actual operation.
Protecting the monitor
Toprotectthemonitorfromdamage,donotoperate
the monitor using a ball point pen or similar tool with
the sharp tip.
Safety precautions Notes
1-LZ-612IR_ENG_0405.indd 2 2010-04-05 �� 5:11:57
English
|
3
ThisProductisnotinstalledbythemanufacturerofa
vehicle on the production line, nor by the professional
importerofavehicleintoanEUMemberState.
Information on Disposal of Old Electrical
and Electronic Equipment and Batteries
(applicable for EU countries that have
adopted separate waste collection systems)
Productsandbatterieswiththesymbol
(crossed-out wheeled bin) cannot be
disposed as household waste.
Oldelectricalandelectronicequipment
and batteries should be recycled at a facility
capable of handling these items and their
waste byproducts.
Contactyourlocalauthorityfordetailsin
locating a recycle facility nearest to you.
Properrecyclingandwastedisposalwill
help conserve resources whilst preventing
detrimental effects on our health and the
environment.
Notice:Thesign“Pbbelowthesymbolfor
batteries indicates that this battery
contains lead.
Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
Manufacturer:
KenwoodCorporation
2967-3Ishikawa-machi,Hachioji-shi,Tokyo,192-8525Japan
EU Representatives:
KenwoodElectronicsEuropeBV
Amsterdamseweg37,1422ACUITHOORN,TheNetherlands
FCC WARNING
Thisequipmentmaygenerateoruseradio
frequencyenergy.Changesormodificationstothis
equipmentmaycauseharmfulinterferenceunless
themodificationsareexpresslyapprovedinthe
instructionmanual.Theusercouldlosetheauthority
tooperatethisequipmentifanunauthorizedchange
or modification is made.
NOTE
ThisClassBdigitalapparatuscomplieswithCanadian
ICES-003.
DVD player units you can control from the
LZ-612IR (As of September, 2009):
KDV-S211P,KDV-S221P,KDV-S250P,KDV-S240P,
KDV-S230P,KDV-S220P,KDV-S210P
IR Wireless Headphone
YoucanuseIRwirelessHeadPhoneasfollows;
KHP-IR72
Thissymbolmarkindicatesthat
Kenwood manufactured this product
so as to decrease harmful inuence on
the environment.
1-LZ-612IR_ENG_0405.indd 3 2010-04-05 �� 5:11:57
4
|
LZ-612IR
Turning Monitor ON/OFF
Turning ON the Power
Press the [ ] button.
Turning OFF the Power
Press the [ ] button.
Video Source Selection
1 Enter Select screen mode
Touch the display window.
2 Select the AV input source
Touch the [AV IN] button.
MEMU AV IN
MENU AV IN
Whenbuttonispressed,thevideosourceswitches
as follows:
Display Setting
AV1 Select the AV1 input source.
AV2 Select the AV2 input (DVD input) source.
Remote control sensor
(For DVD remote only)
IR transmitter LED
Basic Operation
1-LZ-612IR_ENG_0405.indd 4 2010-04-05 �� 5:11:57
English
|
5
DVD Player Control
1 Enter Select screen mode
Touch the display window.
2 Select the function
Touch the function button.
AV IN
MENU
REP
PAGE
Display Function
PAGE Move to the DVD Player Setup screen.
MENU Move to Monitor Setting screen. (page 6)
Press to switch sequentially between playback and
pause.
Press to stop playback.
Search for a next chapter, scene or track.
Search for a previous chapter, scene or track.
Press to perform fast forwards.
Press to perform fast backwards.
REP Use when repeating a specific title or a track on the DVD
player. (Chapter, Title, File, Folder, Track, One All)
AV IN Change AV1/ AV2 input source.
3 Exit DVD Player Control mode
Touch the screen except function button.
• TherelevantOSDisdisplayedonlywhentheDVD
Controlin<OtherSetting>(page7)isturnedon.
• YoucanoperatetheKenwoodDVDplayerconnectedto
theHideawayboxwhentheDVDControlisturnedon.
DVD Player Setup
1 Enter Select screen mode
Touch the display window.
2 Select the function
Touch the function button.
ENT
TOP
AUD
SUBTSET
RTN
PAGE
Display Function
PAGE Move to the DVD Player Control screen.
AUD Change the audio language.
SUBT Change the subtitle language.
///
Move to select a menu on the DVD menu.
TOP Return to the top menu.
SET Display the DVD menu.
RTN Moves to the previous menu.
ENT Performs the selected function.
3 Exit DVD Player Setup mode
Touch the screen except function button.
• TherelevantOSDisdisplayedonlywhentheDVD
Controlin<OtherSetting>(page7)isturnedon.
• YoucanoperatetheKenwoodDVDplayerconnectedto
theHideawayboxwhentheDVDControlisturnedon.
DVD Player Operation
LZ-612IR with Kenwood DVD Player (Optional Accessory)
1-LZ-612IR_ENG_0405.indd 5 2010-04-05 �� 5:11:57
6
|
LZ-612IR
Picture Quality Setting
You can adjust the picture quality of the monitor.
1 Enter Select screen mode
Touch the display window.
2 Select the MENU function
Touch the [MENU] button.
3 Select the Picture Quality Setting mode
Touch the [ ] button.
4 Select the adjusting item
Touch the item.
Contrast
Color
Tint
Sharpness
50
50
50
5
50
Brightness
5 Adjusting the item
Touch the [] or [] button.
Item Setting
Brightness
[] Stronger contrast [] Less contrast
"0""50""100"
Contrast
[] Less contrast []
More contrast
"0""50""100"
Color
[]
Weaker intensity
[]
Stronger intensity
"0""50""100"
Tint
[]
Purplish skin tones
[]
Greenish skin tones
"0""50""100"
Sharpness
[]
Softer definition
[]
Crisper definition
"0""5""10"
(Factory setting: Underlined)
6 Exit Picture Quality setting mode
Touch the [ ] button.
• TheTint”canbeadjustedwhenNTSCvideosignalis
input.
• Ifyoumakenooperationfor10seconds,monitorsetting
mode is automatically canceled.
Monitor Setting
Screen Setting
Change the menu OSD language and monitor
screen size.
1 Enter Select screen mode
Touch the display window.
2 Select the MENU function
Touch the [MENU] button.
3 Select the Screen Setting mode
Touch the [ ] button.
4 Select the adjusting item
Touch the item.
Mode Full
English
Language
5 Adjusting the item
Touch the [] or [] button.
Item Setting
Language Change MENU OSD Language.
"English"/"Français"/"Deutsch"/"Español"
Mode "Full"
Full picture mode.
FULL
JUST
CINEMA
ZOOM
NORMAL
Just
Justify picture mode.
FULL
JUST
CINEMA
ZOOM
NORMAL
“Zoom
Zoom picture mode.
FULL
JUST
CINEMA
ZOOM
NORMAL
"Normal"
Normal picture mode.
FULL
JUST
CINEMA
ZOOM
NORMAL
(Factory setting: Underlined)
6 Exit Screen Setting mode
Touch the [ ] button.
1-LZ-612IR_ENG_0405.indd 6 2010-04-05 �� 5:11:58
English
|
7
Other Setting
Change the other settings.
1 Enter Select screen mode
Touch the display window.
2 Select the MENU function
Touch the [MENU] button.
3 Select the Other Setting mode
Touch the [ ] button.
4 Select the adjusting item
Touch the item.
Audio
Initialize
1-ch
O
DVD/TV Control
5 Adjusting the item
Touch the [] or [] button.
Item Setting
DVD/TV Control Set DVD/TV Player Control/Setup OSD ON or OFF
in AV2 input source.
"Off"/"DVD"/"TV" [”TVno use.]
Audio Displays the IR Headphones transmitter
frequency.
"1-ch": 2.3 MHz/"2-ch": 3.2 MHz
Initialize The setting value is set to the initial state of
factory.
(Factory setting: Underlined)
6 Exit Other Setting mode
Touch the [ ] button.
• Refer to the instruction manual of IR Headphones
(optionalaccessory),whensettingforfrequency.
1-LZ-612IR_ENG_0405.indd 7 2010-04-05 �� 5:11:58
8
|
LZ-612IR
Accessories
DC Cord ..........1
Monitor Cable ..........2
RCA Cable ..........2
Remote Control Cable ..........1
Template ..........1
Mounting Bracket ..........2
Removal Tool ..........1
Mounting Screw (Ø4x16) ..........2
Accesaries/Installation Procedure
Installation Procedure
1. Topreventshortcircuits,removethekeyfromthe
ignition and disconnect the terminal of the
battery.
2. Make the proper input and output cable
connections for each unit.
3. Connectthewiringharnesswiresinthefollowing
order: ground, ignition.
4. Connectthewiringharnessconnectortotheunit.
5. Installtheunitinyourcar.
6. Reconnect the terminal of the battery.
7. Presstheresetbutton.(page2)
WARNING
• Thisproductisintendedforusewith12VDCnegative
groundpoweronly.Donotconnectittoanyotherpower
supply.
• Topreventshorting,disconnectthebatterycablefromthe
negative terminal of the battery during installation.
• Besuretofirmlystabilisethisproduct.Donotinstallitina
location which is not stable.
• Followtheinstallationandwiringproceduresdescribedin
this manual. Improper wiring or modified installation can
not only result in malfunction or damage to the unit but
may also result in an accident.
• Mountingandwiringthisproductrequiresskillsand
experience.Forsafety'ssake,leavethemountingandwiring
work to professionals.
• Ifyourcar’signitiondoesnotcomewithanACCposition,
connect the ignition wires to a power source that can be
turned on and off with the ignition key. If you connect the
ignition wire to a power source that receives a constant
voltage supply, as with battery wires, the battery may die.
• Ifthefuseblows,firstmakesurethatthewireshavenot
caused a short circuit, then replace the old fuse with one
with the same rating.
• Donotletunconnectedwiresorterminalstouchmetal
onthecaroranythingelseconductingelectricity.To
prevent short circuits do not remove the caps from unused
terminals or from the ends of the unconnected wires.
• Aftertheunitisinstalled,checkwhetherthebrakelamps,
blinkers, wipers, etc. on the car are working properly.
• Insulateunconnectedwireswithvinyltapeorothersimilar
material.
• Thoroughlywipeawayoilandotherdirtfromthe
installation surface.
Pleaseavoidinstallationonunevensurfaces.
• DonotinstalltheHideawayUnitunderthecarpet.
Otherwise heat build-up occurs and the unit may be
damaged.
CUT OUT ON DOTTED LINE
(The cut-out size needs to be adjusted
depending on the installation of the monitor.)
LZ-612IR TEMPLATE
INSERT REMOVAL TOOL
INSERT REMOVAL TOOL
LZ-612IR REMOVAL TOOL GUIDE
1-LZ-612IR_ENG_0405.indd 8 2010-04-05 �� 5:11:58
English
|
9
Connection
MonitorCable
(Accessory)
Ignition cable (Red)
Ignition key switch
Carfusebox
(Main fuse)
ACC
Groundcable(Black) (Tocarchassis)
Battery
Monitor Unit
Hideaway Unit
DCCord
(Accessory)
Monitor Unit
Fuse(5A)
AV OUTPUT
(AV2 input signal only)
•Visualoutput(Yellow)
•Audioleftoutput(White)
•Audiorightoutput(Red)
RCACable
(Accessory)
Kenwood DVD Player
(Optional Accessory)
AV1 INPUT
•Visualinput(Yellow)
•Audioleftinput(White)
•Audiorightinput(Red)
RemoteControlCable
(Accessory)
ToRemoteControlSensorinput
ToAudio/VisualOutput
AV2 INPUT (DVD Player)
•Visualinput(Yellow)
•Audioleftinput(White)
•Audiorightinput(Red)
•Ifyouareusingthisunitwitha
compatibleKenwoodDVDplayer,
connectingtheRemoteControlCable
willallowtheLZ-612IR’sremoteto
controlKenwoodDVDplayeraswellas
the monitor.
1-LZ-612IR_ENG_0405.indd 9 2010-04-05 �� 5:11:58
10
|
LZ-612IR
Before mounting the monitor to the headrest:
• Performtherequiredexternalconnectionsfirst(Accessory).
• Usingthesuppliedpapertemplate(Accessory), mark the area to be cut out of the headrest, then carefully
cut it.
1 ConnectMonitorandmonitorconnectioncord(Accessory).
2 Installthemonitorunitinthebracket(Accessory).
Installation for Monitor Unit
Installation
Removing the Monitor Unit
1 Inserttheremovaltool(Accessory) deeply into
theslotsonTOPside,asshown.
Accessory
2 Pullthemonitorunitallthewayoutwithyour
hands, being careful not to drop it.
Installation for Hideaway Unit
Usescrews(Accessory)tofixHideawayUnitonto
an audio board or another.
Accessory
Headrest
Template
(Accessory)
Monitor Unit
Screws
(not supplied)
Installation plate (not supplied)
MountingBracket
(Accessory)
MonitorCable
(Accessory)
1-LZ-612IR_ENG_0405.indd 10 2010-04-05 �� 5:11:59
English
|
11
What might seem to be a malfunction in your unit
may just be the result of slight miss operation or
miss wiring. Before calling service, first check the
following table for possible problems.
The power does not turn on.
! Thefusehasblown.
Aftercheckingforshortcircuitsinthewires,
replace the fuse with one having the same
rating.
! NoACCpositiononvehicleignition.
Connectthesamewiretotheignitionasthe
battery wire.
Nothing happens when the buttons are pressed.
! Thecomputerchipintheunitisnotfunctioning
normally.
Presstheresetbuttonontheunit(page2).
The screen is dark.
! Theunitisinalocationwheretemperatureislow.
If the temperature of the monitor unit drops, the
screen may appear darker when power is first
turnedonduetothecharacteristicsofaliquid
crystalpanel.Waitawhileafterturningpoweron
for the temperature to rise. Normal brightness
will return.
No sound from wireless headphones.
! Thefrequencysettingisnotsetcorrectly.
Selectthetransmitterfrequencyaccordingto
your headphones.
! Theheadphones power is off.
Theheadphones power switch is turned on.
! Theheadphonesbatteriesareexhausted.
Replace the headphones batteries with fresh
ones.
Troubleshooting Guide Specications
Monitor Unit
Screensize
: 6.1 inches wide
136.1(W)×72.0(H)×154.0(Diagonal)mm
5-6/16(W)×2-13/16(H)inches
Displaysystem
:TransparentTNLCDpanel
Drivesystem
:TFTactivematrixsystem
Numberofpixels
:336,960pixels(480H×234V×RGB)
Effectivepixels
: 99.99 %
Pixelarrangement
:RGBstripedarrangement
Backlighting
:LED
IRTransmitterOutput
:(1-ch)Lch:2.3MHz/Rch:2.8MHz
:(2-ch)Lch:3.2MHz/Rch:3.8MHz
Hideaway Unit
Coloursystem
:NTSC/PAL
Externalvideoinputlevel(RCAjacks)
:1±0.1Vp-p/75Ω
Externalaudioinputlevel(RCAjacks)
:2V/10KΩ
Videooutputlevel(RCAjacks)
:1±0.1Vp-p/75Ω
Audiooutputlevel(RCAjacks)
:1.2V/10KΩ
General
Operating voltage
:14.4VDC(11-16V)
Currentconsumption
:1.5A
ConsumedPower
:14W
Operational temperature range
:–10°Cto+60°C
Storage temperature range
:–30°Cto+85°C
Dimensions(W×H×D)
Monitorunit:177×122×34mm
7×4-7/8×1-5/16inch
Hideawayunit:141.5×88.5×32.5mm
5-9/16×3-8/16×1-4/16inch
Weight
Monitorunit:375g(0.83lbs)
Hideawayunit:145g(0.32lbs)
•Specifications subject to change without notice.
•Althoughtheeffectivepixelsfortheliquidcrystalpanelis
givenas99.99%ormore,0.01%ofthepixelsmaynotlight
or may light incorrectly.
1-LZ-612IR_ENG_0405.indd 11 2010-04-05 �� 5:11:59
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Kenwood LZ-612IR User manual

Category
Car video systems
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI