SECO-LARM PR-112S-A User manual

SECO-LARM
Brand
SECO-LARM
Model
PR-112S-A
Category
Security device components
Type
User manual

This manual is also suitable for

The ENFORCER Stand-Alone Proximity Reader provides
a flexible solution for controlled access. The stylish case
and small size make it ideal for use in offices, homes and
apartments. The wave-shaped tri-color LED status bar
accents the case design. Simple installation, quick
programming, and high reliability are combined in the
PR-112S-A Stand-Alone Proximity Reader.
Sealed and weatherproof (IP67).
Tri-color wave-shaped LED status bar indicates proximity
reader's mode and status.
On/Valid Card Indicator
Programming Mode
Invalid Card
Output relay for either time (1 to 180 seconds) or "Toggle" mode.
Egress input for easy exiting.
Buzzer for audible confirmation or silent mode (programmable).
Up to 100 user cards can be programmed.
User cards easily deleted. Delete a single card, or all cards.
Up to 5 "Master" cards can be programmed.
10 Cards included.
(additional cards available, Model # PR-K1S1-A)
Blue
Green
Red
1.949.261.2999 (CA & Int’l) 1.800.662.0800 Fax: 1.949.261.7326
Email: info@seco-larm.com Website: www.seco-larm.com
16842 Millikan Avenue, Irvine, CA 92606
ProxReaderProdInfob.cdr
Power Input 12VDC
Current Draw Standby: 80mA @ 12VDC
PR-112S-A
Features:
Technical Specifications:
®
The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.
Copyright 2007 SECO-LARM U.S.A., Inc. All rights reserved.
RED -- (+) 12VDC
BLACK -- (-) GND
BLUE -- Egress Input
YELLOW -- N.C.
GRAY -- N.O.
BROWN -- COM
3
3 / ”
4
(95mm)
3
1 /
4
” (44mm)
(17mm)
9
1 /16”
(40mm)
13
16
”
/
(21mm)
11
/
16
”
(17mm)
5
/ ”
8
(16mm)
(21mm)
Front
Back (Mounting Plate)
(21mm)
13
”
/
16
13
”
/
16
11
/
16
”
Active: 200mA @ 12VDC
Max. Read Distance 6" (15cm)
User Card Limit 100 cards
Master Card Limit 5 Cards
Transmit Frequency 125Khz
Outputs 1 Relay (Com, N.O., N.C.)
Contact Rating 1A @ 30V
Relay Time Delay 1~180 secs. / Toggle Mode
o o o o
Temperature -4 ~158 F (-20 ~70 C)
Enclosure Rating IP67
11 3 5
Dimensions 3 / " x 1 / " x / " (95 x 44 x 17 mm)
16 4
8
Wire Coding:
Dimensions:
10 cards included
Model #: PR-K1S1-A
  • Page 1 1

SECO-LARM PR-112S-A User manual

SECO-LARM
Brand
SECO-LARM
Model
PR-112S-A
Category
Security device components
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents