Maytag WOC95EC0AE Owner's manual

Brand: Maytag

Model: WOC95EC0AE

Category: Ovens

Type: Owner's manual

INSTALLATION INSTRUCTIONS

27" (68.6 CM) AND 30" (76.2 CM) ELECTRIC BUILT-IN

MICROWAVE/OVEN COMBINATION

INSTRUCTIONS D'INSTALLATION

FOUR CONVENTIONNEL ET FOUR À MICRO-ONDES

ÉLECTRIQUES, COMBINÉS ET ENCASTRÉS

DE 27" (68,6 CM) ET 30" (76,2 CM)

BUILT-IN MICROWAVE/OVEN COMBINATION SAFETY

W10351241A

Table of Contents/Table des matières

BUILT-IN MICROWAVE/OVEN

COMBINATION SAFETY................................................................1

INSTALLATION REQUIREMENTS................................................2

Tools and Parts ............................................................................2

Built-In Microwave/Oven Combination

Location Requirements................................................................2

Electrical Requirements ...............................................................4

INSTALLATION INSTRUCTIONS..................................................5

Prepare Built-In Microwave/Oven Combination..........................5

Remove Oven Door......................................................................5

Make Electrical Connection .........................................................5

Install Oven...................................................................................7

Complete Installation ...................................................................8

SÉCURITÉ DU FOUR À MICRO-ONDES ET DU FOUR

CONVENTIONNEL COMBINÉS ET ENCASTRÉS........................9

EXIGENCES D'INSTALLATION...................................................10

Outils et pièces...........................................................................10

Exigences d'emplacement de l'ensemble four à

micro-ondes et four conventionnel encastrés...........................10

Spécifications électriques ..........................................................12

INSTRUCTIONS D'INSTALLATION.............................................13

Préparation de l'ensemble des fours encastrés

(micro-ondes/conventionnel) .....................................................13

Dépose de la porte du four ........................................................13

Raccordement électrique...........................................................13

Installation du four......................................................................15

Achever l'installation ..................................................................16

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT:

Save for local electrical inspector's use.

IMPORTANT :

À conserver pour consultation par l'inspecteur local des installations électriques.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

Tools needed

■ Phillips screwdriver

■ Measuring tape

■ Drill (for wall cabinet installations)

■ 1" (25 mm) drill bit (for wall cabinet installations)

■ Level

■ Flat-blade screwdriver

Parts needed

■ UL listed or CSA approved conduit connector

■ UL listed wire connectors

Parts supplied

■ Four #8–14 x 1" screws

■ Bottom vent

■ Two #8–18 x ³⁄₈" screws - bottom vent

■ Four grommets*

Check local codes. Check existing electrical supply. See

“Electrical Requirements.”

It is recommended that all electrical connections be made by a

licensed, qualified electrical installer.

*Grommets are not included with models KEMS308S,

KEHU309S and KEMS378S.

Built-In Microwave/Oven Combination

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

■ Cabinet opening dimensions that are shown must be used.

Given dimensions provide minimum clearance with oven.

■ Recessed installation area must provide complete enclosure

around the recessed portion of the oven.

■ Grounded electrical supply is required. See “Electrical

Requirements” section.

■ Electrical supply junction box should be located 3" (7.6 cm)

maximum below the support surface when the oven is

installed in a wall cabinet. A 1" (2.5 cm) minimum diameter

hole should have been drilled in the left rear corner of the

support surface to pass the appliance cable through to the

junction box.

■ Oven support surface must be solid, level and flush with

bottom of cabinet cutout. Floor must be able to support a

total weight (microwave and built-in oven) of 208 lbs (95 kg)

for 27" (68.6 cm) models or 249 lbs (113 kg) for 30" (76.2 cm)

models.

IMPORTANT: To avoid damage to your cabinets, check with

your builder or cabinet supplier to make sure that the

materials used will not discolor, delaminate or sustain other

damage. This oven has been designed in accordance with

the requirements of UL and CSA International and complies

with the maximum allowable wood cabinet temperatures of

194°F (90°C).

Product Dimensions

27" (68.6 cm) and 30" (76.2 cm) Ovens

Cabinet Dimensions

27" (68.6 cm) and 30" (76.2 cm) Ovens

*NOTE: The cabinet height can be between 41" (104.1 cm) and

41½" (105.6 cm) for microwave/oven combination.

27" (68.6 cm) models

42⁹⁄₁₆

" (108.0 cm) overall height

B. 25

⁷⁄₁₆

" (64.6 cm) recessed

width

C. 41" (104.1 cm) recessed height

D. 23

¹⁄₄

" (59.1 cm) max. recessed

depth

E. 27" (68.6 cm) overall width

30" (76.2 cm) models

42⁹⁄₁₆

" (108.0 cm) overall height

B. 28

¹⁄₂

" (72.3 cm) recessed width

C. 41" (104.1 cm) recessed height

D. 23

¹⁄₄

" (59.1 cm) max. recessed

depth

E. 30" (76.2 cm) overall width

27" (68.6 cm) models

A. 27" (68.6 cm) min. cabinet

width

B. 1" (2.5 cm) top of cutout to

bottom of upper cabinet door

C. 19

¹⁄₄

" (48.9 cm) bottom of

cutout to floor is

recommended.

4"-19

¹⁄₄

" (10.2-48.9 cm) bottom

of cutout to floor is acceptable.

D. 25

¹⁄₂

" (64.8 cm) cutout width

E. 1

¹⁄₂

" (3.8 cm) min. bottom of

cutout to top of cabinet door

F. 4 1

⁵⁄₁₆

" (105 cm)* recommended

cutout height

G. 24" (60.7 cm) cutout depth

30" (76.2 cm) models

" (76.2 cm) min. cabinet

width

B. 1" (2.5 cm) top of cutout to

bottom of upper cabinet door

C. 19

¹⁄₄

" (48.9 cm) bottom of

cutout to floor is

recommended.

4"-19

¹⁄₄

" (10.2-48.9 cm) bottom

of cutout to floor is acceptable.

D. 28

¹⁄₂

" (72.4 cm) cutout width

E. 1

¹⁄₂

" (3.8 cm) min. bottom of

cutout to top of cabinet door

F. 4 1

⁵⁄₁₆

" (105 cm)* recommended

cutout height

G. 24" (60.7 cm) cutout depth

Electrical Requirements

If codes permit and a separate ground wire is used, it is

recommended that a qualified electrical installer determine that

the ground path and wire gauge are in accordance with local

codes.

Check with a qualified electrical installer if you are not sure the

oven is properly grounded.

This oven must be connected to a grounded metal, permanent

wiring system.

Be sure that the electrical connection and wire size are adequate

and in conformance with the National Electrical Code, ANSI/

NFPA 70-latest edition or CSA Standards C22.1-94, Canadian

Electrical Code, Part 1 and C22.2 No. O-M91-latest edition, and

all local codes and ordinances.

A copy of the above code standards can be obtained from:

National Fire Protection Association

1 Batterymarch Park

Quincy, MA 02169-7471

CSA International

8501 East Pleasant Valley Road

Cleveland, OH 44131-5575

Electrical Connection

To properly install your oven, you must determine the type of

electrical connection you will be using and follow the instructions

provided for it here.

■ Oven must be connected to the proper electrical voltage,

amperage, and frequency as specified on the model/serial

number rating plate. See the following illustration.

■ Models rated from 7.3 to 9.6 kW at 240 volts (5.4 to 7.4 kW

at 208 volts) require a separate 40-amp circuit. Models rated

at 4.8 kW and below at 240 volts (3.6 kW and below at

208 volts) require a separate 20-amp circuit.

■ Model KEHU309B requires a separate 50-amp circuit.

■ A circuit breaker is recommended.

■ Connect directly to the fused disconnect (or circuit breaker

box) through flexible, armored or nonmetallic sheathed,

copper cable (with grounding wire). See “Make Electrical

Connection” section.

■ Flexible conduit from the oven should be connected directly

to the junction box.

■ Do not cut the conduit. The length of conduit provided is for

serviceability of the oven.

■ A UL listed or CSA approved conduit connector must be

provided.

■ If the house has aluminum wiring follow the procedure below:

1. Connect a section of solid copper wire to the ends of the

flexible conduit leads.

2. Connect the aluminum wiring to the added section of

copper wire using special connectors and/or tools

designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended

procedure. Aluminum/copper connection must conform with

local codes and industry accepted wiring practices.

For power requirements for models WOC54EC7A, WOC54EC0A,

WOC95EC0A and MMW9730A, refer to the following table.

For power requirements for models KEMS379B and KEMS309B,

refer to the following table.

For power requirements for model KEHU309B, refer to the

following table.

A. Model/serial number plate

Voltage Microwave Oven

and Microwave

Oven with Single

Thermal Oven

Microwave Oven

and Microwave

Oven with Single

Convection Oven

240 VAC 5490 W 5520 W

208 VAC 4590 W 4620 W

240 VAC 30.4 A 30.5 A

208 VAC 28.4 A 28.6 A

Voltage Microwave Oven

and Microwave

Oven with Single

Thermal Oven

Microwave Oven

and Microwave

Oven with Single

Convection Oven

240 VAC 6230 W 6260 W

208 VAC 5239 W 5262 W

240 VAC 36.0 A 35.1 A

208 VAC 32.8 A 32.9 A

Voltage Microwave Oven and

Microwave Oven with Single

Convection Oven

240 VAC 7560 W

208 VAC 6246 W

240 VAC 40.5 A

208 VAC 37.7 A

INSTALLATION INSTRUCTIONS

Prepare Built-In Microwave/Oven

Combination

1. Decide on the final location for the oven. Locate existing

wiring to avoid drilling into or severing wiring during

installation.

2. To avoid floor damage, set the oven onto cardboard prior to

installation. Do not use handle or any portion of the front

frame for lifting.

3. Remove the shipping materials and tape from the oven.

4. Remove the hardware package from inside the bag

containing literature.

5. Remove and set aside racks and other parts from inside the

oven.

6. Move oven and cardboard close to the oven’s final location.

Remove Oven Door

IMPORTANT: Use both hands to remove oven door(s).

1. Open the oven door.

2. Locate the oven door latches in both corners of the oven

door, and rotate the latches forward to the unlocked position.

3. Grasp the edges of the oven door with both hands and close

the oven door until it will no longer close. Lift and pull oven

door toward you and remove. Set the oven door aside on a

covered work surface.

Make Electrical Connection

IMPORTANT: For model KEHU309B, you must use 6 gauge

copper or 4 gauge aluminum wire.

This oven is manufactured with a neutral (white) power supply

wire and a cabinet-connected green (or bare) ground wire twisted

together.

1. Disconnect power.

2. Feed the flexible conduit from the oven through the opening

in the cabinet.

3. Remove junction box cover, if it is present.

4. Install a UL listed or CSA approved conduit connector to the

junction box.

5. Route the flexible conduit from the oven to the junction box

through a UL listed or CSA approved conduit connector.

6. Tighten screws on conduit connector.

7. See “Electrical Connection Options Chart” to complete

installation for your type of electrical connection.

A. Oven door latch in locked

position

B. Oven door latch in unlocked

position

WARNING

Excessive Weight Hazard

Use two or more people to move and install oven.

Failure to do so can result in back or other injury.

A. UL listed or CSA approved conduit connector

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 8 gauge solid copper wire.

Electrically ground oven.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Use 6 gauge copper or 4 gauge aluminum wire.

Electrically ground oven.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Electrical Connection Options Chart

4-Wire Cable from Home Power Supply

IMPORTANT: Use the 4-wire cable from home power supply in

the U.S. where local codes do not allow grounding through

neutral, New Branch circuit installations (1996 NEC), mobile

homes and recreational vehicles, new construction and in

Canada.

1. Connect the 2 black wires (B) together using a UL listed wire

connector.

2. Connect the 2 red wires (C) together using a UL listed wire

connector.

3. Untwist white wire from green (or bare) ground wire coming

from the oven.

4. Connect the 2 white wires (F) together using a UL listed wire

connector.

5. Connect the green (or bare) ground wire (H) from the oven

cable to the green (or bare) ground wire (in the junction box)

using a UL listed wire connector.

6. Install junction box cover.

3-Wire Cable from Home Power Supply - U.S. Only

IMPORTANT: Use the 3-wire cable from home power supply

where local codes permit a 3-wire connection.

1. Connect the 2 black wires (C) together using a UL listed wire

connector.

2. Connect the 2 white wires (D) and the green (or bare) ground

wire (of the oven cable) using a UL listed wire connector.

3. Connect the 2 red wires (G) together using a UL listed wire

connector.

4. Install junction box cover.

If your home has: Go to section:

4-wire 4-wire Cable from Home

Power Supply

3-wire 3-wire Cable from Home

Power Supply

A. Cable from home power supply

B. Black wires

C. Red wires

D. 4-wire flexible conduit from

oven

E. Junction box

F. White wi res

G. UL listed wire connectors

H. Green (or bare) ground wires

I. UL listed or CSA approved

conduit connector

½"

(1.3 cm)

½"

(1.3 cm)

A. Cable from home power supply

B. Junction box

C. Black wires

D. White wires

E. Green (or bare) ground wire

(from oven)

F. 4-wire flexible conduit from

oven

G. Red wires

H. UL listed wire connectors

I. UL listed or CSA approved

conduit connector

Install Oven

1. Using 2 or more people, lift oven partially into cabinet cutout.

Use the oven opening as an area to grip.

NOTE: Push against seal area of oven front frame when

pushing oven into cabinet. Do not push against outside

edges.

2. Push against seal area of front frame to push oven completely

into cabinet and center oven into cabinet cutout.

3. Push oven completely into cabinet and center oven into

cabinet cutout.

NOTE: If you have model KEMS308S, KEHU309S or

KEMS378S, proceed to Step 5.

4. Insert the grommet into the mounting rail hole using a flat-

blade screwdriver. Insert the screwdriver into the grommet

and turn ¹⁄₄ turn counterclockwise. Make sure the grommet

stays in position.

5. Securely fasten oven to cabinet using the #8–14 x 1" screws

provided. Insert the screws through hole in the grommet. Do

not overtighten screws.

6. On some models, the oven vent is taped to the side of the

oven. See the following instructions to install.

■ Insert the vent tabs (B) into slots (A) in the oven frame.

■ With one #8–18 x ³⁄₈" screw (C) for each side of the vent,

fasten vent securely to the oven.

7. Replace oven racks.

8. Replace oven door by inserting ends of hinges into hinge

slots in the oven frame.

9. Push hinges in as far as they will go and open the oven door.

You should feel the oven door drop into place.

10. Rotate both hinge latches back to the locked position.

11. Check that door is free to open and close. If it is not, repeat

the removal and installation procedures. See “Prepare Built-In

Microwave/Oven Combination” section.

12. Reconnect power.

13. Display panel will light briefly, and “PF” should appear in the

display.

14. If display panel does not light, please reference the

“Assistance or Service” section of the Use and Care Guide or

contact the dealer from whom you purchased your oven.

A. Mounting rail

B. Mounting rail hole

C. Grommet

A. Oven frame slot

B. Vent tab

C. #8–18 x ³⁄₈" screw

D. Oven vent

Complete Installation

1. Check that all parts are now installed. If there is an extra part,

go back through the steps to see which step was skipped.

2. Check that you have all of your tools.

3. Dispose of/recycle all packaging materials.

4. For oven use and cleaning, read the Use and Care Guide.

Check Operation of Lower Oven

1. Turn power on.

2. At first use, set up the clock and any other preferences, if

available. For more information, read the Use and Care

Guide.

3. Press BROIL.

4. Set the temperature.

5. Press START.

If oven does not operate, check the following:

■ Household fuse is intact and tight; or circuit breaker has

not tripped.

■ Electrical supply is connected.

■ See “Troubleshooting” section in the Use and Care Guide.

6. When oven has been on for 5 minutes, feel for heat.

If you do not feel heat or if an error message appears in the

display, turn off the oven and contact a qualified technician.

7. Press CANCEL OVEN.

Check Operation of Microwave Oven

1. Fill a microwave-safe container with 1 cup (250 mL) of water

and place container inside microwave oven. Close door

firmly.

2. Press COOK and set microwave oven cook time to

“2:00” minutes.

3. Press START. The interior microwave oven light should be on,

and the remaining cooking time should be displayed.

When display reads “1:00” minute, open microwave oven

door. The microwave should stop cooking. Close door firmly.

The interior microwave oven light should turn off.

4. Press START. Microwave oven should begin cooking, and the

microwave oven interior light should be on.

Let microwave oven complete cooking time. A tone will

sound 4 times at the end of the cooking time, and the

microwave oven will shut off.

5. Open microwave oven door and slowly remove container.

Water in container should be hot.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the Use

and Care Guide or contact the dealer from whom you purchased

your built-in and microwave ovens.

Page is loading ...

Maytag WOC95EC0AE Owner's manual

Brand: Maytag

Model: WOC95EC0AE

Category: Ovens

Type: Owner's manual

Download PDF

report

in other languages

français: Maytag WOC95EC0AE Le manuel du propriétaire

Maytag WOC95EC0AE Owner's manual

Maytag WOC95EC0AE Owner's manual

in other languages

Related papers

Other documents