dji FLY User manual

Page is loading ...

1

Contents

EN

KR

IT

CHT

ES

NL

CHS

DE

PT

PT-BR

JP

FR

RU

User Guide 3

使用说明

5

使用說明

7

ユーザーガイド

9

사용자 가이드

12

Bedienungsanleitung 15

Guía del usuario 18

Guide de l'utilisateur 21

Guida dell'utente 24

Gebruiksaanwijzing 27

Manual do utilizador 29

Guia do usuário 33

Руководство пользователя 36

Compliance Information 40

Page is loading ...

3

EN

Disclaimer

Please read this entire document and all safe and lawful practices DJI

TM

provided

carefully before use. Failure to read and follow instructions and warnings may result

in serious injury to yourself or others, damage to your DJI product, or damage to

other objects in the vicinity. By using this product, you hereby signify that you have

read this disclaimer and warning carefully and that you understand and agree to

abide by the terms and conditions herein. You agree that you are solely responsible

for your own conduct while using this product, and for any consequences thereof.

DJI accepts no liability for damage, injury or any legal responsibility incurred directly

or indirectly from the use of this product. This document and all other collateral

documents are subject to change at the sole discretion of DJI.

Warning

1. When using the MAVIC

TM

Mini Two-Way Charging Hub (hereinafter referred

to as “charging hub”) to charge the Mavic Mini Intelligent Flight Batteries, it

is recommended to use a DJI 18W USB Charger or an FCC/CE-certified USB

charger that supports Quick Charge protocol.

2. Place the charging hub on a flat and stable surface when in use. Ensure the

device is properly insulated to prevent fire hazards.

3. DO NOT attempt to touch the metal terminals on the charging hub.

4. Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.

In the Box

Charging Hub × 1 Micro USB Cable × 1

Overview

1. Battery Ports

2. Status LEDs

3. Function Button

4. Power Port (Micro USB)

5. USB Port

1

2

3

4

5

Introduction

The Mavic Mini Two-Way Charging Hub is designed both to charge Intelligent

Flight Batteries connected to the battery ports and external devices such as a

Mavic Mini Remote Controller, smartphones, or tablets connected to the USB port.

The following scenarios explain more about how the charging hub works.

1. When a charger is connected to the charging hub with the Intelligent Flight

Batteries inserted and external devices disconnected from the USB port, the

charging hub will only charge the Intelligent Flight Batteries.

4

2. When the Intelligent Flight Batteries are inserted into the charging hub, with

external devices connected to the USB port and the charger disconnected

from the charging hub, the batteries can be used as a power bank to charge

the connected external devices.

Usage

Charging Intelligent Flight Batteries

1. As shown in Figure A, insert the battery into the battery port until there is a

click. Connect the charging hub to a power outlet (100-240 V, 50/60 Hz) using

a Micro USB cable and a DJI 18W USB Charger.

2. The Intelligent Flight Battery with the highest power level will be charged first

and the rest will be charged in sequence according to their power levels.

The status LEDs will glow solid white after the corresponding battery is fully

charged. Remove the battery from the charging hub as shown in Figure B.

Using Intelligent Flight Batteries as Power Banks

As shown in Figure C, insert the Intelligent Flight Battery into the charging hub

without connecting it to a charger, then connect any external device to the USB

port in the charging hub. The Intelligent Flight Battery with the lowest power level

will be discharged first and the rest in sequence according to their power levels.

The status LEDs will display the power level of the battery that supplies power

when the external devices are being charged.

Press the function button on the charging hub once to activate charging

if charging does not begin automatically.

Checking Battery Levels

The status LEDs will display battery levels for five seconds after the batteries are

inserted into the charging hub. Users can also check the battery levels by pressing

the function button once. Refer to the section below for the battery level description.

Status LEDs Descriptions

Charging Status

Each battery port has its corresponding status LED array.

Status LEDs in an array blink

successively (quickly)

The battery in the corresponding battery

port is being charged using a Quick

Charge charger.

Status LEDs in an array blink

successively (slowly)

The battery in the corresponding battery port

is being charged using a normal charger.

Status LEDs in an array blink

successively (slowly for approx. 30 s,

then blink very slowly with a gap of 2 s)

The battery in the corresponding battery

port is being charged. In this case,

charging will be extremely slow. It is

recommended to use another Micro USB

cable for charging.

5

Status LEDs in an array are solid

The battery in the corresponding battery

port is fully charged.

All status LEDs blink in sequence No battery is inserted.

Battery Level

Each battery port has its corresponding status LED array, from LED1 to LED4 (from

left to right). The battery level description is the same as the one for the battery level

LEDs on the aircraft. Refer to the Mavic Mini User Manual for more information.

Abnormal Status

The abnormal status display of each battery status LED array is the same as the

one for the battery level LEDs on the aircraft when inserting the battery into the

aircraft. Refer to the Mavic Mini User Manual for more information.

Specications

Model MM1CH

Compatible DJI Charger DJI 18W USB Charger

Compatible DJI Battery MB2-2400mAh-7.2V Intelligent Flight Battery

Operating Temperature 5° to 40° C (41° to 104° F)

Input 5 V

2 A / 9 V 2A / 12 V 2A

USB Port Output Max: 5 V

2 A

Weight Approx. 80 g

Charging Time*

For three MB2-2400mAh-7.2V batteries:

Approx. 4.5 hours

* Charging time was tested using a DJI 18W USB Charger in a lab environment and

should be used as reference only.

CHS

免责声明

使用本产品之前，请仔细阅读并遵循本文及大疆

TM

创新（DJI

TM

）提供的所有安全

指引，否则可能会给您和周围的人带来伤害，损坏本产品或其它周围的物品。一旦

使用本产品，即视为您已经仔细阅读本文档，理解、认可和接受本文档全部条款和

内容。您承诺对使用本产品以及可能带来的后果负全部责任。大疆创新（DJI）对

于直接或间接使用本产品而造成的损坏、伤害以及任何法律责任不予负责。

本文档及本产品所有相关的文档最终解释权归大疆创新（DJI）所有。如有更新，

恕不另行通知。请访问 www.dji.com 官方网站以获取最新的产品信息。

注意事项

1. 使用 MAVIC

TM

Mini 双向充电管家（简称“充电管家”）为智能飞行电池充电时，

推荐配合 DJI 18W USB 充电器或其他符合 FCC/CE 规格且支持 QC 快充协议

的 USB 充电器。

Page is loading ...

40

Compliance Information

FCC Supplier’s Declaration of Conformity

Product name: Mavic Mini Two-Way Charging Hub

Model Number: MM1CH

Manufacturer’s Name: SZ DJI TECHNOLOGY CO., LTD.

Manufacturer’s Address: 14th floor, West Wing, Skyworth Semiconductor Design

Building NO.18 Gaoxin South 4th Ave, Nanshan District, Shenzhen, Guangdong,

China

Responsible Party: DJI Technology, Inc.

Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502

Contact person: Fajia Wang

Telephone: (650)812-0559

We, DJI Technology, Inc., being the responsible party, declares that the above

mentioned model was tested to demonstrate complying with all applicable FCC

rules and regulations.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Signed for and on half of: DJI Technology, Inc.

Name: Fajia Wang

Position: Certification Manager

Date: 2019-10-12

Signature:

ISED Compliance

CAN ICES-3 (B)/NMB-3(B)

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares

that this device is in compliance with the essential requirements and other relevant

provisions of the Directive 2014/30/EU.

A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-

compliance

EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer, Germany

Declaración de cumplimiento UE: SZ DJI TECHNOLOGY CO., LTD. por la

presente declara que este dispositivo cumple los requisitos básicos y el resto de

provisiones relevantes de la Directive 2014/30/EU.

Hay disponible online una copia de la Declaración de conformidad UE en www.dji.

com/euro-compliance

Page is loading ...

MAVIC is a trademark of DJI.

DJI Support

DJI 技术支持

DJI 技術支援

DJI サポート

DJI

고객지원

DJI Support

Servicio de asistencia de DJI

Service client DJI

Assistenza DJI

DJI-ondersteuning

Suporte DJI

Assistência da DJI

Техническая поддержка DJI

http://www.dji.com/support

dji FLY User manual

This manual is also suitable for

dji FLY User manual

in other languages

Related papers

Other documents