Craftsman 580.752830 Operating instructions

Brand: Craftsman

Model: 580.752830

Category: High-pressure cleaners

Type: Operating instructions

Operator'sIVianual

2700 MAX PSi*

2.3 MAXGPIVi

iViodelNo. 580.752830

HOURS: IVlon.- Fri. 8 a.m. to 5 p.m. (CT)

WARNING

Beforeusing this product, readthis

manualand follow all Safety Rules

and Operatinginstructions.

ADVERTENCIA

Antes de utilizar el producto, lea este

manualy siga todas las Reglasde

Seguridad e Instrucciones de Uso.

,, Safety

,, Assembly

,, Operation

,,Maintenance

,, Parts

,, Espafiol, p. 36

* This pressure washer is rated in accordance to the PressureWasher Manufacturers Association

(PWMA) standard PWI01 (Testing and Rating Performance of Pressure Washers).

* Esta limpiadora a presiOnest_ clasificada conforme a la norma PWl01 (comprobaciOn y clasificaciOn de rendimiento de limpiadoras

a presiOn)de la AsociaciOn defabricantes de bombas a presiOn(Pressure Washer Manufacturers Association, PWMA).

SearsBrands ManagementCorporation,HoffrnanEstates,IL 60179 U.S.A.

Visit our Craftsman website: www.craftsman.com

Part No. 313979GS Draft - (12/08/2010)

WARRANTY .......................................... 2

REPAIRPROTECTIONAGREEMENT........................ 2

SAFETYRULES...................................... 3-5

FEATURESAND CONTROLS.............................. 6

ASSEMBLY........................................ 7-11

OPERATION....................................... 12-16

SPECIFICATIONS..................................... 17

MAINTENANCE.................................... 18-22

STORAGE........................................... 23

TROUBLESHOOTING.................................. 24

NOTES............................................. 25

REPLACEMENTPARTS.............................. 26-33

EMISSIONCONTROLWARRANTY..................... 34-35

ESPANOL......................................... 36-63

HOWTO ORDERPARTS........................ BACKPAGE

CRAFTSMANTWOYEARLIMITEDWARRANTY

FORTWOYEARSfrom the dateof purchase,this product is warranted against any defects in material or workmanship.

Defectiveproduct will receivefree repair or replacementif repair is unavailable.

Forwarranty coveragedetails to obtain free repair or replacement,visit the web site:www.craftsman.com

This warranty doesnot cover the spray guns, hoses, nozzleextensions, nozzles,filters and spark plugs, which are expendable

parts that canwear out from normal usewithin the warranty period.

This warranty is void if this product is ever usedwhile providing commercial services or if rentedto another person.

This warranty givesyou specific legalrights, and you may also haveother rights which vary from stateto state.

SearsBrandsManagement Corporation,HoffrnanEstates,IL 60179

Congratulations on making a smart purchase.

Your new Craftsman® product is designed and manufactured

for years of dependableoperation. But likeall products, it

may require repair from time to time. That'swhen havinga

Repair ProtectionAgreement can saveyou money and

aggravation.

Here's whatthe Repair Protection Agreement* includes:

* Expert service by our 10,000 professional repair

specialists

, Unlimited serviceand no chargefor parts and labor on

all covered repairs

, Product replacementup to $1500 if your covered

product can't befixed

, Discountof 10% from regular priceof serviceand related

installed parts not covered by the agreement;also, 10%

off regular price of preventivemaintenancecheck

, Fasthelp byphone-we caii it Rapid Resolution- phone

support from a Sears representative.Thinkof us as a

"talking owner's manual".

Onceyou purchasethe RepairProtection Agreement,a

simple phone carlis all it takes for you to schedule service.

You cancall anytimeday or night, or schedule a service

appointment online.

The Repair ProtectionAgreement is a risk-free purchase. If

you cancelfor any reasonduring the product warranty

period,we will provide a full refund. Or, a prorated refund

anytime after the product warranty period expires. Purchase

your RepairProtectionAgreement today!

Some limitations and exclusions apply. Forpricesand

additional informationin the U.S.A. call 1-800-827-6655.

* Coverage in Canadavaries on someitems. Forfuji

details, caii Sears Canadaat 1-800-361-6665.

Sears InstallationService

ForSearsprofessional installation of home appliances,

garagedoor openers, water heaters,and other major home

items, in the U.S.A.or Canadacall 1-800-4-1VlY-HOIVlE®.

Readthis manualcarefully and becomefamiliar

with yourpressurewasher. Knowitsapplications,

itslimitations, and any hazardsinvolved.

importantSafetyinformation

Safety Symbols and Meanings

Operator'sManual ToxicFumes

2 5-

SlipperySurface Fail

ElectricalShock

FluidInjection

Fire

Explosion Kickback Projectile

MovingParts Flying Objects Hot Surface

,llb

ChemicalBurn

,&, Thesafety alertsymbol indicatesa potential personal

injury hazard.A signalword (DANGER,WARNING,or

CAUTION)is usedwith the alertsymbol to designatea

degreeor levelof hazardseriousness.A safety symbol may

be usedto representthe type of hazard.The signalword

NOTICEis usedto address practices not relatedto personal

injury.

,_, BANGERindicatesa hazardwhich, if not avoided, will

result in deathor serious injury.

,_, WARNINGindicatesa hazardwhich, if not avoided, could

result in deathor serious injury.

,A CAUTIONindicates a hazardwhich, if not avoided, could

result in minor or moderate injury.

NOTICEaddress practices not relatedto personal injury.

A. WARNING Theengine exhaustfrom this product

contains chemicals known to the Stateof California to

cause cancer,birth defects,or other reproductive harm.

A. WARNING This product contains lead and lead

compounds, known to the State of Californiato cause

birth defects or other reproductive harm. Washyour

handsafter handling this product.

_i_WARNING ChemicalBurn Hazard.

i:_ Chemicalscould cause burns resulting in death,

serious injury, and/or property damage.

• DONOTusecausticliquidwith pressurewasher.

• UseONLYpressurewashersafedetergents/soaps.Followall

manufacturersinstructions.

,&, WARNING Running engine gives off carbon

monoxide, an odorless, colorless, poison gas.

_ reathing carbon monoxide could result in death,

serious injury, headache, fatigue, dizziness,

vomiting, confusion, seizures, nausea or fainting.

Some chemicals or detergents could be harmful if inhaled

or ingested, resulting in death, serious injury, nausea,

fainting or poisoning.

• Operatethis product ONLYoutdoors.

• Keepexhaustgas from entering a confined areathrough

windows, doors, ventilation intakes,or other openings.

• DO NOToperatethis product inside any building, carport,

porch, mobile equipment, marineapplications, or enclosure,

evenif windows and doors areopen.

• Usea respirator or maskwheneverthere is a chancethat

vapors may be inhaledwhen using chemicals.

• Readall instructions with mask so you arecertain the mask will

provide the necessaryprotection against inhaling harmful

vapors when using chemicals.

,& WARNING Starter cord kickback (rapid retraction) will

pull hand and arm toward engine faster than you

,_can let go which could cause broken bones,

fractures, bruises, or sprains resulting in serious

injury.

• NEVERpullstarter cord without first relieving spraygun

pressure.

• When starting engine, pull cord slowly until resistance isfelt

andthen pull rapidly to avoid kickback.

• After each starting attempt, where enginefails to run, always

point spray gun in safe direction, pressred button and squeeze

spray gun trigger to releasehigh pressure.

• Firmly grasp spray gun with both hands when using high

pressure sprayto avoid injury when spraygun kicks back.

,_.WARNING Riskof electrocution.

'_.ml Contactwith power source could causeelectric

shock or burn resulting in deathor serious injury.

• NEVERspraynearpowersource.

,_, WARNING The high pressure stream of water that

this equipment produces could cut through skin

and its underlying tissues, resulting in serious

injury and possible amputation.

Spray gun traps high water pressure, even when engine is

stopped and water is disconnected, which could result in

serious injury.

• If cut byfluid, call physician immediately. DONOTtreat as a

simple cut.

• DONOTallow CHILDRENto operate pressure washer.

• NEVERrepairhigh pressure hose.Replaceit.

• NEVERrepairleaking connections with sealantof any kind.

Replaceo-ring or seal.

• NEVERconnect high pressure hose to nozzleextension.

• Keephigh pressure hoseconnectedto pump and spraygun

while system is pressurized.

• DO NOTlift or tilt surface cleanerfrom horizontalsurface while

connectedto spray gun. Releasespray guntrigger prior to

lifting or tilting.

• ALWAYS point spray gun in safedirection, pressred button

andsqueezespray gun trigger to releasehigh pressure,every

time you stop engine.

• NEVERaim spray gun at people,animals, or plants.

• DO NOTsecure spraygun in open position.

• DO NOTleavespray gun unattendedwhile machine is running.

• NEVERusea spray gun which does not have atrigger lockor

trigger guardin placeand in working order.

• Always be certain spray gun, nozzlesand accessoriesare

correctly attached.

_i_ WARNING Fueland its vapors are extremely flammable

and explosive which could cause burns,

fire or explosion resulting in death,

serious injury and/or property damage.

WHENADDINGOR DRAININGFUEL

* Turn pressurewasher engineOFFandlet it cool at least 2

minutes before removingfuel cap. Loosen cap slowly to relieve

pressure in tank.

, Fill or drain fuel tank outdoors.

, DONOToverfill tank. Allow spacefor fuel expansion.

, Iffuel spills, wait until it evaporatesbeforestarting engine.

, Keepfuel awayfrom sparks, open flames, pilot lights, heat,and

other ignition sources.

, Checkfuel lines,tank, cap andfittings frequently for cracks or

leaks. Replaceif necessary.

, DONOTlight a cigaretteor smoke.

WHENSTARTINGEQUIPMENT

* Ensurespark plug, muffler,fuel cap,and air cleanerarein place.

* DO NOTcrank enginewith spark plug removed.

WHENOPERATINGEQUIPMENT

* DO NOToperatethis product insideany building, carport,

porch, mobile equipment, marineapplications, or enclosure.

* DONOTtip engine or equipment at anglewhich causes fuel to

spill.

* DONOTsprayflammable liquids.

WHENTRANSPORTING,MOVINGOR REPAIRINGEQUIPMENT

, Transport/move/repair with fuel tank EMPTYor with fuel shutoff

valveOFF.

, DONOTtip engine or equipmentat anglewhich causesfuel to

spill.

, Disconnectspark plug wire.

WHENSTORINGFUELOR EQUIPMENTWITH FUELiN TANK

* Store awayfrom furnaces, stoves, water heaters,clothes

dryers, or other appliancesthat havepilot light or other ignition

source becausethey could ignite fuel vapors.

,_, WARNING Exhaust heat/gases could ignite

combustibles, structures or damage fuel

causing a fire, resulting death,

tank in

serious injury and/or property damage.

Contact with muffler area could cause burns resulting in

serious injury.

• DO NOTtouch hot parts and AVOIDhot exhaust gases.

• Allow equipmentto cool beforetouching.

• Keepat least5 feet (1.5 m) of clearanceon all sidesof pressure

washer including overhead.

• it isa violation of California Public ResourceCode, Section

4442, to use or operate the engine on any forest-covered,

brush-covered, or grass-covered landunlessthe exhaust

system is equippedwith a spark arrester,as defined in Section

4442, maintained ineffective working order. Otherstates or

federaljurisdictions mayhavesimilar laws.

Contactthe original equipment manufacturer, retailer, or dealer

to obtain a spark arrester designedfor the exhaust system

installed on this engine.

• Replacement parts must bethe sameand installed in the same

position asthe original parts.

,&, WARNING Use of pressure washer could create

puddles and slippery surfaces causing

Ll=

_ you to fall resulting in death or serious

r injury.

Kickback from spray gun could cause you to fall resulting

in death or serious injury.

• Operatepressurewasher from a stablesurface.

• Thecleaning areashould have adequateslopes and drainageto

reducethe possibility of a fall due to slippery surfaces.

• Beextremely careful if you must usethe pressurewasher from

a ladder,scaffolding, or any other similar location.

• Firmly grasp spray gun with both hands when using high

pressure sprayto avoid injury when spraygun kicks back.

,&.WARNING Unintentionalsparking could cause fire or

'_.dh electric shock resulting in death or

serious injury.

WHENADJUSTINGORMAKINGREPAIRSTOYOURPRESSURE

WASHER

* Disconnectthesparkplugwirefromthesparkplugandplace

thewirewhereit cannotcontactsparkplug.

WHENTESTINGFORENGINESPARK

* Useapprovedsparkplugtester.

* DONOTcheckfor sparkwith sparkplugremoved.

,&, WARNING Starter and other rotating parts could

entangle hands, hair, clothing, or accessories

resulting in serious injury.

Rotating parts under shroud could crush or cut

resulting in serious injury.

* NEVERoperate pressure washerwithout protective housing or

covers.

. DO NOTwear looseclothing, jewelry or anything that could be

caught in the starter or other rotating parts.

. Tie up long hairand removejewelry.

. DO NOTreach under shroudwhen surface cleaner is connected

to the spraygun.

. Disconnectsurface cleanerfrom spray gun when not in use or

before servicing.

_i_ WARNING Risk of eye or bodily injury.

Spray or rotating parts under shroud

could propel objects resulting in serious

injury,

• Alwayswearindirectvented(chemicalsplash)safetygoggles

markedtocomplywithANSIZ87.fwhen usingorinvicinityof

thisequipment.

• NEVERsubstitute safety glasses or dry-condition goggles for

indirect vented safetygoggles.

• Always wear protectiveclothing such asa long-sleeved shirt,

long pantsand close-toed shoes.

• NEVERoperate pressure washerwhen barefoot or wearing

sandalsor shorts.

• Keepsurface cleaner in contact with horizontal surfacewhile

connectedto the spray gun.

• Removeforeign objectsfrom surface prior to cleaning.

_i_ CAUTION Excessively high operating speeds could

result in minor injury and/or pressure washer damage.

Excessively low speeds impose a heavy load.

• DO NOTtamper with governor spring, links or other partsto

increase enginespeed. Pressurewasher supplies correct rated

pressure and flow when running at governed speed.

• DO NOTmodify pressure washer in any way.

NOTICE High pressure spray could damage fragile items

including glass.

• DO NOTpoint spray gun at glasswhen using MAXspray pattern

in selector nozzle.

= NEVERaim spray gun at plants.

NOTICE Improper treatment of pressure washer could

damage it and shorten its life.

• If you havequestions about intended use,ask dealeror contact

qualified servicecenter.

• NEVERoperate units with broken or missing parts, or without

protective housing or covers.

• DO NOTby-pass any safetydevice on this machine.

• DONOTtamper with governedspeed.

• DONOToperate pressurewasher above rated pressure.

• DONOTmodify pressurewasher in any way.

• Beforestarting pressure washer in cold weather,check all parts of

the equipment to be sure ice has not formed there.

• NEVERmove machine by pulling on hoses.Use handleprovided

on unit.

• This equipmentis designedto be used with Searsauthorized parts

ONLY.If equipmentis used with parts that DONOTcomply with

minimum specifications, userassumesall risks and liabilities.

KNOWYOURPRESSUREWASHER

Readthe Operator'sManual and safety rulesbefore operating yourpressure washer.

Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and

adjustments. Save this manual for future reference.

A- AccessoryTray-- Provides convenient storagefor accessories,

such as gun, nozzleextension, etc.

B- HoseWrap and High PressureHose-- Hosewrap provides

easytransport and handling of the high pressure hose.Connect

one end of hose to water pump and the other endto spray gun.

C- Recoil Starter-- Usedfor starting the engine manually.

D - ProjectPro@ PerfectMWMSiphon-- Mixes concentrate with

pressure washer spray.

E- Oil Fill/Dipstick -- Check,add and drain engine oil here.

F - Engineidentification-- Provides model, type and code of

engine. Pleasehavethese readilyavailable if calling for

assistance.

G - Surface Cleaner -- Provides quick and easycleaning for large

horizontal areas.

H - Pump-- Develops high pressure.

J - HighPressureOutlet-- Connectionfor high pressurehose.

K- Nozzle Extension with Quick Connect -- Allows you to switch

between selector nozzleandsurface cleaner.

L - Air Filter-- Protects engine byfiltering dust and debris out of

intakeair.

IVi- EngineRocker Switch -- Push this switch to on position (I or

ON) before using recoil starter. Push switch to off position (0

or OFF)for shutting off engine.

N - Warning/Operating Instructions Tag -- Identifies hazardsand

proper procedureto start/stop pressurewasher.

P- Bottle Bracket -- Cleaningsolution bottle fits in wire form

bracket here. Concentratebottle not included.

R - Fuel Tank-- Fill tank with regular unleadedfuel. Always leave

room for fuel expansion.

S- Fold DownHandle-- Handleand accessory tray fold flat atop

cold enginefor space-saving storage.

T - Spray Gun-- Controls the application of water onto cleaning

surface with trigger device.Includestrigger lock.

items Not Shown:

identificationLabel (near rear of base plate) -- Provides model

and serial number of pressure washer. Pleasehavethese readily

available if callingfor assistance.

Water Inlet -- Connection for garden hose.

Automatic Cool DownSystem -- Cycleswaterthrough pump when

water reaches125°-155°F. Warm water will dischargefrom pump

onto ground. This system preventsinternal pump damage.

DetergentSiphoning Tube/Filter-- Useto siphon pressurewasher

safedetergentsintothe low pressurestream.

Selector Nozzle-- Containsfive different spray pattern nozzlesfor

various applications.

Your pressure washer requires some assembly and is ready

for useonly after it has been properly servicedwith the

recommendedoil and fuel.

If you haveany problemswith theassemblyof your

pressurewasher, please call the pressurewasher helpline

at 1=800-222-3136.

UNPACKTHEPRESSUREWASHER

1. Removeeverythingfrom carton except pressurewasher.

2. Opencarton completely by cutting eachcorner from top

to bottom.

5. Add fuel to fuel tank.

6. Connectpressure hoseto spray gun and pump.

7. Connectwater supply to pump.

8. Attach nozzleextension to spray gun.

9. Attach quick connect selector nozzleto nozzleextension.

AttachHandleandAccessoryTray

1. Placehandle(A) onto handle supports (B) connectedto

main unit. Make sure holes (C) in handlealign with holes

3. Removepressure washer from carton.

CARTONCONTENTS

Checkall contents. If anyparts are missing or damaged,call

the pressure washer helplineat 1-800-222-3136.

• Main Unit

• Handle

• AccessoryTray

• High PressureHose

• Spray Gun

• NozzleExtensionwith Quick ConnectFitting

• Surface Cleaner

• Quick ConnectSelector Nozzle

• Oil Bottle

• HoseWrap

• DetergentSiphoning Hose/Filter

• Bottle Brackets (2)

• PerfectMWMSiphoning Unit/Hose

• Parts Bag(which includes the following):

• Operator's Manual

• Owner's Registration Card

• HandleFasteningHardwareKit (whichincludes):

• HandleBolts (2)

• CarriageBolt (2)

• Rope Guide(1)

• Plastic Knobsfor Handle(2)

• Plastic Knob (3)

• TreeClips (4)

Becomefamiliar with eachpiece beforeassemblingthe

pressure washer, identify all contents with the illustration on

page 6. if any parts are missing or damaged, call the

pressure washer helpline at1-800-222-3136.

ASSEMBLINGPRESSUREWASHER

Your Craftsmanpressure washer will needassembly before

operation:

1. Fill out and sendin registration card.

2. Attach handle and accessorytray.

3. Connectdetergent siphon hoseto pump.

4. Add oil to engine crankcase.

insert handle carriagebolts (D) through holes from

inside of unit and attach a plastic knob (E) from outside

of unit. Tighten by hand. Byloosening both knobs to the

middle section of the attachmentbolt, the upper handle

canfold forward to store fiat atop the cold engine.

NOTICE DONOTfold the handle down while the engine is

hot.

3. Placeaccessorytray (F) over holes (6) on handle

(viewing from backof unit). Pushthe tree clips (H) into

the holes until they sit flat against the accessorytray.

insert supplied accessoriesin spacesprovided in

accessorytray. See How to UseAccessory Tray.

Attach rope guide (A) through handlewith plastic knob

(B). Tighten by hand. Route engine recoil rope through

guide.

Align hosewrap (C)to the back side of accessorytray.

Locate notch with "unlock"icon (B) on hosewrap.

Position notch at top with hosewrap in vertical position.

Clips in the back of accessorytray should slide into the

grooves on the inside surface of hosewrap. Slide hose

wrap on back of accessorytray and rotate 1/8 turn until

"locked"icon (E) is in vertical position. Hosewrap is

easily removed from the accessorytray for wrapping and

unwrapping of the high pressure hose. A clip to secure

the hoseon the reel makesit easyto wrap the hose

while it is detachedfrom the accessorytray.

Attach bottle brackets (F) to handlewith carriage bolts

(6) and black plastic knobs (N). Tighten by hand.

2-1N-1SoapSystem

The pressure washer is equipped with two detergent

siphoning hoses.

Project Pro PerfectMW MSiphon

Bluetube with blue bottle cap:

Whenusing the blue PerfectMWMsiphon, usethe

PerfectMixTMExtremeConcentratestraight from

the bottle.

Standard Siphon Tube

Cleartube with filter:

When using the clear siphon tube, dilute

1 part PerfectlViixTMExtremeConcentrate

to 16 parts water (4 ozof concentrate

makes 1/2 gallon of mix.)

Attach Project Pro® PerfectiVIWMSiphon to

Pump

Attach the hose end of the blue PerfectMixTMSiphon (J) to

the barbed hosefitting (K) on the pump.

Attach PerfectiVIWMDetergentSiphon to

ConcentrateBottle

PlacePerfectMixTMbottle (not included) in the bottle bracket

on the handle.Removecapfrom bottle and insert the

PerfectMixTMSiphon (L). Screwthe siphon unit to the top of

the bottle (M). Usethe clip on the cap (L) to snapsiphon to

bottle bracketwhen siphon is not in a concentrate bottle.

Add EngineOil

1. Placepressure washer on a flat, levelsurface.

2. Cleanarea around oil fill and remove yellow oil fill

cap/dipstick.

3. Using oil funnel (optional), slowly pour contents of

supplied oil into oil fill opening, frequently checking oil

level. DONOTOVERFILL.

Full

NOTICE Improper treatment of pressure washer could

damage it and shorten its life.

• DO NOTattempt to crank or start the engine beforeit has been

properly servicedwith the recommended oil.This could result in

an enginefailure.

4. Replaceoil fill cap/dipstick and fully tighten.

AddFuel

Fuel must meet theserequirements:

• Clean,fresh, unleaded gasoline.

• A minimum of 87 octane/87 AKi (91 RON).High altitude

use, see HighAltitude.

• Gasolinewith up to 10% ethanol (gasohol) or up to 15%

MTBE (methyl tertiary butyl ether) is acceptable.

NOTICE Avoid pressure washer damage.

Failureto follow Operator's Manualfor fuel

recommendations voids warranty.

• DONOTuseunapprovedgasolinesuchasE85.

• DONOTmixoil in gasoline.

• DONOTmodifyengineto runonalternatefuels.

,_. WARNING Fueland its vapors areextremelyflammable

and explosivewhich could causeburns,

:_1_ fire or explosionresulting in death,

serious injury and/orproperty damage.

WHENADDINGFUEL

• Turn pressure washerengine OFFandlet it cool at least2

minutes beforeremoving fuel cap. Loosencap slowly to relieve

pressure in tank.

• Fill fuel tank outdoors.

• DONOToverfill tank. Allow spacefor fuel expansion.

• If fuel spills, wait until it evaporatesbefore starting engine.

• Keepfuel awayfrom sparks, open flames, pilot lights, heat,and

other ignition sources.

• Checkfuel lines,tank, cap and fittings frequently for cracks or

leaks. Replaceif necessary.

• DONOTlight a cigarette or smoke.

To protect the fuel system from gum formation, mix in a fuel

stabilizerwhen adding fuel. See Storage.All fuel is not the

same.If you experiencestarting or performance problems

after using fuel, switch to a different fuel provider or change

brands. This engine is certified to operateon gasoline. The

emission control system for this engine is EM(Engine

Modifications).

1. Cleanareaaround fuel fill cap, removecap.

2. Slowly add regular unleadedfuel (A) to fuel tank (B). Be

careful not to overfill. To allow for fuel expansion,do not

fill abovethe bottom of the fuel tank neck.

J N NNNNNNNNNN N

N NNNNNNNNNN N

J N NNNNNNNNNN N

3. Install fuel cap and wait for any spilledfuel to evaporate.

CAUTION! Alcohol-blended fuels (calledgasohol, ethanol or

methanol) canattract moisture, which leadsto separation and

formation of acids during storage.Acidic gascandamagethe

fuel system of an enginewhile in storage.

To avoid engine problems, the fuel system should be treated

with a fuel preserveror emptied beforestorage of 30 days or

longer. If adding a fuel preserver,fill the fuel tank with fresh

fuel. If only partially filled, air in the tank will promote fuel

deterioration during storage. If fuel preserver is not used,

drain the fuel tank, start the engine and let it run until the fuel

lines and carburetor are empty. Usefresh fuel next season.

SeeStoragefor additional information.

NEVERuse engine or carburetor cleaner products in the fuel

tank as permanent damagemay occur.

HighAltitude

At altitudes over 5,000 feet (1524 meters), a minimum

85 octane / 85 AKi (89 RON)gasolineis acceptable.To

remainemissions compliant, high altitude adjustment is

required. Operationwithout this adjustment wiii cause

decreasedperformance, increasedfuel consumption, and

increasedemissions. Seea qualified Searsdealerfor high

altitude adjustment information. Operationof the engine at

altitudes below 2,500 feet (762 meters) with the high altitude

kit is not recommended.

FreshStart@ Fuel Cap

The FreshStart@fuel cap (A) is designed to hold a

cartridge (B) which containsfuel preserver.Adding fuel

preserver helps keepfuel fresh and carburetors cleanfor

easierstarting aii season long. The FreshStart@fuel cap,if

equipped with a cartridge, automatically drips concentrated

fuel preserverinto your fuel tank so you don't haveto add it

yourself.

NOTICE FreshStart@ fuel preserver cartridge is availableas

an optional accessory, retail item 7133386. it is not included

with the pressurewasher. Contact the original equipment

manufacturer, retailer,or dealerto obtain a cartridge

designedfor the FreshStart@fuel cap installed on this

engine.

Readand follow all instructions andwarnings given in the

FreshStart@fuel preservercartridge package.

Lubricate O-Rings

Lubrication of o-rings is extremely important for installation

and operation. The useof a lubricant (petroleum or synthetic

grease)during assembly helpsseat o-rings properly and

provides an improved seal. It also helps protect the o-ring

from damageby abrasion, pinching or cutting and extends

the life of the o-ring.

NOTICE ALWAYSapplya small amount of lubricant on

o-rings prior to assemblingthe garden hoseto the pump (C),

high pressure hose(D), spray gun (E), and nozzle

extension(F).

Lubricateall connectionsshownbelow, following these

instructions:

1. inspect and cleanconnecting surfaces prior to

lubrication and assembly.

2. Use lubricants sparingly during assembly; a light film is

all that is required.

3. Use a small brush or cotton swab to apply grease

directly to o-rings wherethey are not accessible(QC

fitting, M22 fitting).

ConnectHoseandWater Supply to Pump

NOTICE DONOTrun the pump without the water supply

connectedand turned on.

* Damagetoequipmentresultingfrom failuretofollowthis

instructionwillvoidwarranty.

4. Runwater through garden hosefor 30 secondsto flush

it of debris. Turn off water.

NOTICE DONOTsiphon standing water for the water

supply. Use ONLYcold water (less than 100°F).

5. Connectgarden hose(not to exceed50 feet in length) to

water inlet. Tighten by hand.

NOTICE Removeand discard the shipping caps from the

pump's high pressure outlet and water inlet before attaching

hoses.

1. Uncoil high pressure hose and attachone end of hoseto

baseof spray gun. Tighten by hand.

_i_WARNING The high pressure stream of water that

this equipment produces could cut through skin

and its underlying tissues, resulting in serious

injury and possible amputation.

* NEVERconnect high pressure hose to nozzleextension.

* Keephigh pressure hose connectedto pump and spraygun

while system is pressurized.

* Always be certain spray gun, nozzlesand accessoriesare

correctly attached.

2. Attach other end of high pressure hoseto high pressure

outlet on pump. Tighten by hand.

Beforeconnectinggarden hoseto water inlet, inspect

inlet screen (A). Cleanscreen if it contains debris or have

it replacedif damaged.DONOTrunpressurewasher if

inlet screenisdamaged or missing.

NOTICE Using a OneWay Valve (vacuumbreakeror check

valve) at pump inlet could cause pump or inlet connector

damage.

• ThereMUSTbeatleasttenfeetofunrestrictedgardenhose

betweenthepressurewasherinletandanydevice,suchasavacu-

umbreakeror checkvalve.

* Damageto equipment resulting from failure to follow this instruc-

tion will void warranty.

,&, WARNING Riskof eyeinjury.

Spray could splash back or propel objects

resulting in serious injury.

* Alwayswear indirectvented (chemical splash) safety goggles

markedto comply with ANSIZ87.1 when using or in vicinity of

this equipment.

* NEVERsubstitute safety glasses or dry-condition goggles for

indirect vented safetygoggles.

Turn ONthe water, press red button (B) on the gun and

squeezethe trigger to purge the pumpsystem of air and

impurities.

Checklist BeforeStarting Engine

Reviewthe unit to ensureyou haveperformed all of the

following:

1. Besure to read SafetyRules and Operationsections

before using the pressure washer.

2. Makesure handleis in placeand secure.

3. Checkthat oil has beenadded to proper levelin engine

crankcase.

4. Add proper fuel to fuel tank.

5. Checkfor proper hoseconnections (high pressure and

water supply) and that there are no kinks, cuts, or

damageto the high pressure hose.

6. Provide proper water supply (not to exceed100%).

HOWTO USEYOURPRESSUREWASHER

If you haveanyproblems operating your pressure washer,

pleasecallthe pressure washer helpline at 1-800-222-3136.

PressureWasherLocation

PressureWasherClearance

,A WARNING Exhaustheat/gasescould ignite

combustibles, structuresor damagefuel tank

causing afire, resultingin death,serious injury

and/or property damage.

• Keepat least5 ft. (1.5m) clearanceonall sidesof pressure

washerincludingoverhead.

Placepressure washer outdoors in an area that will not

accumulate deadlyexhaustgas. DONOTplacepressure

washer where exhaustgas (A) could accumulate and enter

inside or be drawn into a potentially occupied building.

Ensureexhaustgas is kept awayfrom anywindows, doors,

ventilation intakes, or other openingsthat can allow exhaust

gasto collect in aconfined area. Prevailingwinds and air

currents should be taken into considerationwhen positioning

_ressurewasher.

,_. WARNING Running engine gives off carbon

monoxide, an odorless, colorless, poison gas.

_ reathing carbon monoxide could result in death,

serious injury, headache, fatigue, dizziness,

vomiting, confusion, seizures, nausea or fainting.

• Operatethis product ONLYoutdoors.

• Keepexhaustgas from entering a confined areathrough

windows, doors, ventilation intakes,or other openings.

• DO NOToperatethis product insideany building, carport,

porch, mobile equipment, marineapplications, or enclosure,

evenif windows and doors areopen.

To Start YourPressureWasher

To start your engine-powered pressurewasher for the first

time, follow these instructions step-by-step. This information

alsoapplies wheneveryou start the engine after you havelet

the pressure washer sit idle for at leasta day.

1. Placepressurewasher outside nearan water source

capableof supplying water at a flow rate greaterthan

3.3 gallons per minute and no less than 20 PSi at

pressurewasher end of garden hose.

2. Checkthat high pressure hose is tightly connectedto

spray gun and pump. SeeAssembly for illustrations.

3. Makesure unit is in a levelposition.

4. Connectgarden hoseto water inlet on pressurewasher

pump.

NOTICE DONOTrun the pump without the water supply

connectedand turned on.

• Damageto equipmentresultingfromfailureto followthis

instructionwill voidwarranty.

5. Turn ONthe water, press red button on the gun and

squeezethe trigger to purge the pump system of air and

impurities.

6. Attach nozzleextension to spray gun. Tighten by hand.

Pull backon collar of nozzleextension, insert selector

nozzleand releasecollar. Tug on selector nozzleto make

sure it is securelyin place. See How to UseSelector

Nozzle.

Pushengine rocker switch (B) to on position (I or ON).

NOTICE Beforestarting the pressure washer, be sureyou

are wearing safety goggles asdescribed below.

,_. WARNING Riskof eyeinjury.

Spraycould splash back or propel objects

resulting in serious injury.

* Always wear indirect vented (chemical splash) safety goggles

markedto comply with ANSIZ87.1 when using or in vicinity of

this equipment.

* NEVERsubstitute safety glasses or dry-condition goggles for

indirect vented safetygoggles.

NOTICE This unit is equipped with a ReadyStart® engine.A

ReadyStart® enginemeans there is no priming or choking

required.

9. Whenstarting engine, position yourself as

recommendedand grasp starter grip handle and pull

slowly until you feel some resistance.Then pull rapidly

to start engine.

,_. WARNING Starter cord kickback (rapid retraction) will

puii hand and arm toward engine faster than you

III_< can let go which could cause broken bones,

fractures, bruises, or sprains resulting in serious

injury.

* NEVERpullstarter cord without first relieving spraygun

pressure.

* When starting engine, pull cord slowly until resistanceisfelt

andthen pull rapidly to avoid kickback.

* After each starting attempt, where enginefails to run, always

point spray gun in safe direction, pressred button and squeeze

spray gun trigger to releasehigh pressure.

* Firmly grasp spray gunwith both hands when using high

pressure sprayto avoid injury when spraygun kicks back.

O. Return recoil starter slowly. DONOT let rope "snap

back" against starter.

NOTICE Pressurewasher is equipped with an automatic idle

control. Theidle control will lower engine speedwhen spray

gun trigger is released.

11. Point spray gun in a safe direction, push the red button

to releasethe trigger lock, and pull the trigger.

_i_ WARNING The high pressure stream of water that

this equipment produces could cut through skin

and its underlying tissues, resulting in serious

injury and possible amputation.

Spray gun traps high water pressure, even when engine is

stopped and water is disconnected, which could result in

serious injury.

* DONOTallow CHILDRENto operatepressure washer.

* Keephigh pressure hose connectedto pump and spraygun

while system is pressurized.

* NEVERaim spraygun at people,animals, or plants.

* DO NOTsecure spray gun in open position.

* DO NOTleavespray gun unattendedwhile machine is running.

* NEVERuse aspray gun which doesnot have atrigger lock or

trigger guard in placeand in working order.

* Alwaysbe certain spray gun, nozzlesand accessoriesare

correctly attached.

_i_ WARNING Exhaust heat/gases could ignite

._ combustibles, structures or damage fuel

tank causing a fire, resulting in death,

serious injury and/or property damage.

Contact with muffler area could cause burns resulting in

serious injury.

* DO NOTtouch hot parts andAVOIDhot exhaust gases.

* Allow equipment to cool beforetouching.

* Keepat least5 feet (1.5 m) of clearanceon all sidesof pressure

washer including overhead.

* It isa violation of California PuNic ResourceCode, Section

4442, to use or operate the engine on any forest-covered,

brush-covered, or grass-covered land unlessthe exhaust

system is equippedwith a spark arrester,as defined in Section

4442, maintained ineffective working order. Otherstates or

federaljurisdictions may havesimilar laws.

Contactthe original equipment manufacturer, retailer, or dealer

to obtain a sparkarrester designedfor the exhaustsystem

installed onthis engine.

* Replacementparts must bethe same and installed in the same

position as the original parts.

Howto StopYourPressureWasher

1. Release spray gun trigger and let engine idle for two

minutes.

2. Pushengine rocker switch to off position (0 or OFF).

3. ALWAYSpoint spray gun in a safe direction, push red

button and squeezespray gun trigger to releaseretained

high water pressure.

_i_WARNING The high pressure stream of water that

this equipment produces could cut through skin

and its underlying tissues, resulting in serious

injury and possible amputation.

Spray gun traps high water pressure,evenwhen engine is

stopped and water is disconnected, which could result in

serious injury.

* Keephighpressurehoseconnectedto pumpandspraygun

whilesystemispressurized.

* ALWAYSpointspraygunin safedirection,pressredbutton

andsqueezesprayguntriggerto releasehighpressure,every

timeyoustopengine.

How to Use Accessory Tray

The unit is equipped with an accessorytray with places to

store your spray gun and nozzleextension. Thereis also a

detachablehosewrap atthe back of the accessorytray to

hold your high pressure hose.

1. Placenozzleextensionand selector nozzlethrough hole

on accessorytray on left side of unit.

Y f ......

2. Placespray gun through hole on accessorytray on right

side of unit.

NOTICE You may also usethe spray gun holder on the

accessorytray to store your spray gun, nozzleextensionand

selector nozzleas shown in Featuresand Controls section.

3. Wrap high pressure hoseon hosewrap then attach hose

wrap to back of accessorytray.

4. Hook providedon back of accessorytray for safely

storing safety goggles.

Howto UseSelector Nozzle

Theselector nozzleallows you to switch betweenfive

different spray pattern nozzles.Spraypatterns can be

changedwhile pressurewasher is running once spray gun

trigger safety lock is engaged.The spray patterns vary as

shown below.

_i_WARNING The high pressure stream of water that

this equipment produces could cut through skin

and its underlying tissues, resulting in serious

injury and possible amputation.

• NEVERchangespraypatternswithoutthetriggerlockedonthe

spraygun.

• DONOTtwist selectornozzlewhilespraying.

Followtheseinstructionsto changenozzlepatterns:

1. Select desiredspray pattern:

• MAX- Forstubborn or hard to reachsurfacesuch

as secondstory surfaces,paint removal,oil stains,

rust removal or other stubborn substances(tar,

gum, grease,wax,etc.).

/J /_

* GENERAL- For most all purposecleaning such as

home siding, brick patios, wood decks, driveways

and sidewalks, garagefloors, etc..

, DELICATE- Forgentle cleaningof cars/trucks,

boats, RV's, patiofurniture, lawn equipment, etc..

, FLUSH- Forquick high flow clean up and long

reachcleaning of second story siding and windows.

, SOAP- Forgeneral soapapplications or to launch

soapto second story siding and windows.

Push button on selector nozzle,nozzledial will pop up.

Turn dial until desiredspray pattern lines up with button

on selector nozzle.

Push dial in until it locks into place.

UsageTips

* For most effective cleaning, keepselector nozzlefrom

8 to 24 inches (20 to 61 cm) away from cleaning surface.

* If you get selector nozzletoo close, especiallyusing a

high pressure spray pattern nozzle,you may damage

surface being cleaned.

* DONOTget closer than 6 inches (15 cm) when cleaning

tires.

Howto UseSurface Cleaner

Thesurface cleanerhasdual high pressure water jets that

spin rapidly breaking up dirt and grime without streaking or

striping surfaces.The 12 in. (30.5 cm) wide surfacecleaner

gently glides across surfaces,quickly and easily cleaning

large horizontal areassuch as garagefloors, driveways and

patios. Thelightweight enclosure contains the spray,

eliminating messy overspray and backsplash.

,_, WARNING The high pressure stream of water that

this equipment produces could cut through skin

and its underlying tissues, resulting in serious

injury and possible amputation.

Spray gun traps high water pressure,evenwhen engine is

stopped and water is disconnected, which could result in

serious injury.

= DONOTlift or tilt surfacecleanerfrom horizontalsurfacewhile

connectedto spraygun.Releasesprayguntriggerpriorto

liftingor tilting.

= ALWAYSpressredbuttonandsqueezesprayguntriggerto

releasehighpressure,everytimeyoustopengine.

To attachthe surfacecleaner to the nozzle extension:

1. Pull back collar on quick-connect and pull selector

nozzleoff. Store selector nozzlein holder provided on

the accessorytray.

2. Pull back on collar, insert surface cleanerand release

collar. Tug on surface cleanerto makesure it is securely

in place.

NOTICE Beforestarting the pressure washer, be sureyou

are wearing safety goggles asdescribed below.

,_, WARNING Risk of eye or bodily injury.

Spray or rotating parts under shroud

could propel objects resulting in serious

injury,

• Alwayswearindirectvented(chemicalsplash)safetygoggles

markedto comply with ANSIZ87.1 when using or in vicinity of

this equipment.

• NEVERsubstitute safety glasses or dry-condition goggles for

indirect vented safetygoggles.

• Always wear protectiveclothing such asa long-sleevedshirt,

long pantsand close-toed shoes.

Keepsurfacecleaner in contact with horizontal surfacewhile

connectedto the spray gun.

Removeforeign objects from surface prior to cleaning.

Start enginefollowing instructions How to Start Your

Pressure Washer.

Placesurfacecleaneron horizontal surface, push the red

button to releasethe trigger lock on spray gun and pull

the trigger.

_i_WARNING Rotating parts under shroud could crush

or cut resulting in serious injury.

• DO NOTreach under shroud when surface cleaner is connected

to the spraygun.

• Disconnectsurface cleanerfrom spray gun when not in use or

before servicing.

NOTICE Detergentcannot be applied with the surface

cleaner.

2-IN-1 SoapSystem

_k WARNING ChemicalBurn Hazard.

,- Chemicalscould causeburns resulting in death,

'_serious injury, and/or property damage.

• DONOTusecausticliquidwith pressurewasher.

• UseONLYpressurewashersafedetergents/soaps.Followall

manufacturersinstructions.

Cleaning and Applying Detergentwith the

Project Pro® PerfectlVIWMSiphon

To apply undiluted detergent using the blue

PerfectMixTM siphon, follow these steps:

1. Reviewuseof selector nozzle.

2. Attach PerfectMWMsiphon hoseto

pump and PerfectMixTM concentrate

bottle.

NOTICE Contact with the hot muffler could damage

detergent siphoning tube.

• When inserting the siphon into a detergentsolution bottle, route

the tube soasto keepit from inadvertently contacting the hot

muffler.

3. Makesure SOAPspray pattern nozzleis selectedon

selector nozzle.

NOTICE Detergentcannot be applied with the MAX,

GENERAL,DELICATEor FLUSHspray pattern nozzles.

4. Makesure garden hoseis connectedto water inlet.

Checkthat high pressure hose is connectedto spray gun

and pump. Turn on water.

NOTICE You must attach all hoses before you start the

engine.

• Startingthe enginewithout all the hoses connectedand without

the waterturned ONcould damagethe pump.

• Damageto equipment resulting from failure to follow this

instruction will void warranty.

5. Start engine following instructions How to Start Your

Pressure Washer.

6. Apply detergentto a dry surface, starting at lower

portion of areato be washed and work upward, using

long, even, overlappingstrokes.

7. Allow detergent to "soakin"for 3-5 minutes before

washing and rinsing. Reapplyas neededto prevent

surfacefrom drying. DONOTallow detergent to dry on

(prevents streaking).

Cleaning and Applying Detergentwith

the Standard Clear Siphon

To applydiluted detergent using the

standard clear siphon tube, follow these

steps:

1. Reviewuse of selector nozzle.

2. Attach clearsiphon hoseto barbed fitting on pump.

3. Mix detergent solution as required by job.

4. Placesmall filter end of clear siphoning tube into

container with diluted solution asdescribed above.

NOTICE DONOTinsert standard siphon hosein Extreme

Concentrate.Failureto dilute concentrate will cause excessive

application and consumption of solution.

NOTICE Make surethe filter is fully submerged in fluid

while applying solution.

NOTICE Contact with the hot muffler could damage

detergent siphoning tube.

• When inserting the siphon into a detergent solution bottle, route

the tube so asto keep it from inadvertently contactingthe hot

muffler.

5. Make sure SOAPspray pattern nozzleis selectedon

selector nozzle.

NOTICE Detergentcannot be applied with the MAX,

GENERAL,DELICATEor FLUSHspray pattern nozzles.

6. Make sure garden hose is connectedto water inlet.

Checkthat high pressure hoseis connected to spray gun

and pump. Turn on water.

NOT/CE You must attach all hoses before you start the

engine.

• Starting the engine without all the hoses connected andwithout

the waterturned ON could damagethe pump.

• Damageto equipment resulting from failure to follow this

instruction will void warranty.

7. Start enginefollowing instructions How to Start Your

Pressure Washer.

8. Apply detergent to a dry surface, starting at lower

portion of areato be washedand work upward, using

long, even,overlapping strokes.

9. Allow detergent to "soak in" for 3-5 minutes before

washing and rinsing. Reapplyas neededto prevent

surfacefrom drying. DONOTallow detergentto dry on

(prevents streaking).

NOTICE You must flush the detergent siphoning system

after each use by placingthe filter into a bucket of clean

water, then run the pressure washer in low pressure for 1-2

minutes.

PressureWasher Rinsing

For

Rinsing:

Select and changeto desired spray pattern nozzleon

selector nozzle.See How ToUseSelector Nozzle.

Keepspray gun a safe distancefrom areayou plan to

spray.

,_, WARNING Kickbackfrom spray gun could causeyou

to fall resulting in deathor serious injury.

* Operatepressurewasherfroma stablesurface.

. Beextremelycarefulifyoumustusethepressurewasherfrom

a ladder,scaffolding,or anyothersimilarlocation.

. Firmlygraspspraygunwithbothhandswhenusinghigh

pressuresprayto avoidinjurywhenspraygunkicksback.

3. Apply a high pressure spray to a small areaand then

checksurfacefor damage. If no damageis found, you

canassume it is okay to continue rinsing.

4. Start at top of areato be rinsed, working down with

sameoverlapping strokes asyou usedfor cleaning.

Cleaning Detergent Siphoning Tube

If you usedthe cleardetergent siphoning tube, you must

flush it with cleanwater beforestopping the engine.

1. Placedetergent siphoning tube/filter in a bucketfull of

cleanwater.

Select and changeto SOAPspray pattern nozzleon

selector nozzle.See How ToUseSelector Nozzle.

Flushfor 1-2 minutes.

Shut off engine following instructions How to Stop

Pressure Washerand turn off water supply.

ALWAYSpoint spray gun in a safe direction push red

button and squeezespray gun trigger to releaseretained

high water pressure.

_i_WARNING The high pressure stream of water that

this equipment produces could cut through skin

and its underlying tissues, resulting in serious

injury and possible amputation.

Spray gun traps high water pressure,evenwhen engine is

stopped and water is disconnected, which could result in

serious injury.

• Keephighpressurehoseconnectedto pumpandspraygun

whilesystemispressurized.

• ALWAYSpointspraygunin safedirection,pressredbutton

andsqueezesprayguntriggerto releasehighpressure,every

timeyoustopengine.

Automatic CoolDownSystem (ThermalRelief)

If you run the engine on your pressure washer for

3-5 minutes without pressing the trigger on the spray gun,

circulating water in the pump can reachtemperatures above

125°F.The systemengagesto cool the pump by discharging

the warm water onto the ground.

ENGINETECHNICALiNFORMATiON

This is a single cylinder, overheadvalve (OHV), air cooled

engine, it is a low emissions engine.

In the State of California, Model 110000 enginesare certified

by the California Air Resources Boardto meet emissions

standardsfor 125 hours. Such certification does not grant

the purchaser, owner or operator of this engine any

additional warranties with respectto the performanceor

operational life of this engine.Theengine is warranted solely

according to the product and emissions warranties stated

elsewherein this manual.

Power Ratings

Thegross power rating for individual gas engine models is

labeled in accordancewith SAE(Society of Automotive

Engineers)codeJ1940 (Small Engine Power & Torque

Rating Procedure), and rating performance has been

obtained and corrected in accordancewith SAEJ1995

(Revision 2002-05). Torquevalues are derived at 3060 RPM;

horsepower values are derived at 3600 RPM.Net power

values aretaken with exhaustand air cleanerinstalled

whereas gross powervalues are collected without these

attachments.Actual gross engine power will be higher than

net engine power and is affected by, among other things,

ambient operating conditions and engine-to-engine

variability. Giventhe wide array of products on which engines

are placed, the gasengine may not developthe ratedgross

power when used in a given pieceof power equipment.This

difference is due to a variety of factors including, but not

limited to, the variety of engine components (air cleaner,

exhaust, charging, cooling, carburetor, fuel pump, etc.),

application limitations, ambient operating conditions

(temperature, humidity, altitude), and engine-to-engine

variability. Dueto manufacturing and capacity limitations,

Briggs & Stratton may substitute an engine of higher rated

power for this Seriesengine.

PRODUCTSPECIFICATIONS

PressureWasherSpecifications

Max Outlet Pressure ...................... 2,700 PSI*

Max Flow Rate............................. 2.3 GPM

DetergentMix ........................ Use asdirected

Water SupplyTemperature .......... Not to exceed100°F

Engine Specifications

Bore............................... 2.58 in. (65.6mm)

Stroke ............................. 2.04 in. (51.8mm)

Displacement ........................ 10.69in. (175cc)

SparkPlug

Type:...................... Briggs & Stratton 692051

SetGapTo: ...................... 0.020inch (0.50mm)

ArmatureAir Gap:........... 0.010-0.014in.(0.25-0.36mm)

Valveclearancewithvalvesprings installedand piston 1/4 in.

(6 mm) pasttop deadcenter(checkwhenengineiscold).

Intake.................... 0.004-0.008in.(0.10-0.20mm)

Exhaust .................. 0.004-0.008in.(0.10-0.20mm)

FuelCapacity............................... 1.6Quarts

0il Capacity........................ 20 Ounces(0.6 liter)

NOTICE Forpractical operation, the engine load should not

exceed85% of ratedpower. Enginepower will decrease

3-1/2% for each1,000 feet (300 meters) above sealeveland

1% for each 10° F(5.6° C) above77° F(25° C). It should

operatesatisfactorily at an angle up to 15°.

* This pressure washer is ratedin accordanceto the

PressureWasher ManufacturersAssociation (PWMA)

standard PW101(Testing and Rating Performanceof

PressureWashers).

OWNER'SRESPONSiBiLiTiES

Follow the hourly or calendarintervals, whichever occurs

first. More frequent service is required when operating in

adverseconditions noted below.

ii ii _ i iiii iiii ]i i;;iiii_ii_i{ii_i!_i!i}iiiii}}iiiiJii}iiiii_ i{__ii _!Ji}iiii_i_i}_ii iiH_iiiiii i]iiii iiii iiiiii iiii iiiiii iiii iiiiii iiii iiiiii iiii iiiiii iiii iiiiii iiii iiiiii iiii iiHHHHHHHHH_

• Changeengine oil

iiiiiiiiii,'_iiiiiiiiii;1; ; ;; ;;; ;;3 ;

• Check/clean water inlet screen'

• Checkhigh pressure hose

• Checkdetergent siphoning hoses

• Checkspray gun and assembly for leaks

• Cleandebris

• Checkengine oil level

!i{i;;iiiiiiiiiiii_iiiiiiiiiiiiiiiii]i/i;;iii iiii _} iii ii_ i{i iiiiiii i HH:::::__i_ii

• Cleanengine air cleaner_

• Changeengine oil_

• inspect muffler and spark arrester

• Replaceengine air cleaner_

• Replacespark plug

• Cleancooling system_

Clean if clogged. Replace if perforated or torn.

2Service more often under dirty or dusty conditions.

GeneralRecommendations

Regularmaintenancewill improve the performanceand

extendthe life of the pressurewasher. Seeany Searsor

other qualified service dealerfor service.

Thepressure washer warranty does not cover items that

havebeensubjected to operator abuseor negligence.To

receivefull valuefrom the warranty, the operator must

maintain pressurewasher as instructed in this manual

including proper storage asdetailed in Storage.

Someadjustments will needto be made periodically to

properly maintain your pressurewasher.

All service and adjustments should be madeat least once

eachseason.Follow the requirementsin the Maintenance

Schedulechart above.

NOTICE Oncea yearyou should cleanor replacethe spark

plug and replacethe air filter. A new spark plug and clean air

filter assure proper fuel-air mixture and helpyour engine run

better and last longer.

PumpOil

DONOTattempt any oil maintenanceon this pump. The

pump is pre-iubricated and sealedfrom the factory, requiring

no additional maintenancefor the life of the pump.

EmissionsControl

Maintenance,replacement,or repair of the emissions

control devices and systemsmay be performedbyany non-

roadengine repair establishment or individual. However,

to obtain "no charge" emissions control service, the work

must be performed by a factory authorizeddealer. Seethe

Emissions Warranty.

BeforeEachUse

1. Checkengine oil level.

2. Cleandebris.

3. Checkwater inlet screenfor damage.

4. Checkhigh pressure hose for leaks.

5. Checkgun and nozzleextension assemblyfor leaks.

6. Purge pump of air and contaminants.

PRESSUREWASHERMAINTENANCE

CleanDebris

Daily or before use, cleanaccumulateddebris from pressure

washer. Keeplinkage, spring and controls clean. Keeparea

around and behind muffler free from any combustible debris.

inspect cooling air slots and openings on the pressure

washer. Theseopenings must be kept clean and

unobstructed.

Pressurewasher parts should be kept cleanto reducethe

risk of overheating and ignition of accumulated debris.

• Usea damp cloth to wipe exterior surfaces clean.

NOTICE improper treatment of pressurewasher could

damageit and shorten its life.

• DONOTinsertanyobjectsthroughcoolingslots.

• Usea soft bristle brush to loosencaked on dirt, oil, etc.

• Usea vacuum cleanerto pick up loosedirt and debris.

CheckandClean Iniel Screen

Examinegarden hoseinlet screen. Cleanif it is clogged or

replaceif it is torn.

CheckHighPressure Hose

High pressure hoses candevelop leaksfrom wear, kinking,

or abuse, inspect hose beforeeachuse. Checkfor cuts,

leaks,abrasions,bulging of cover, or damageor movement

of couplings. If anyof these conditions exist, replacehose

immediately.

,_, WARNING The high pressure stream of water that

this equipment produces could cut through skin

and its underlying tissues, resulting in serious

injury and possible amputation.

• NEVERrepairhighpressurehose.Replaceit.

• ReplacementhoseratingMUSTequalorexceedmaximum

pressureratingofunit.

CheckDetergentSiphoningTubes

Examinethe filter on eachdetergent tube and clean if

clogged. Thetube should fit tightly on the barbed fitting.

Examinethe tube for leaks or tears. Replacethe filter or tube

if either is damaged.

DetergentSiphoning CheckBall

Occasionallycheck ball in detergent siphoning system may

become stuck from storage, dried soap, or minerals in water.

Thecheck bail can be freed by performing the following:

NOTICE Beforeperforming this procedure, be sure you are

wearing safety goggles asdescribed below.

,_. WARNING Riskof eyeinjury.

Spraycould splash back or propel objects

resulting in serious injury.

* Always wear indirect vented (chemical splash) safety goggles

markedto comply with ANSi Z87.1 when using or in vicinity of

this equipment.

* NEVERsubstitute safety glasses or dry-condition goggles for

indirect vented safetygoggles.

Shut off engine and turn off water supply.

ALWAYSpoint spray gun in a safe direction, press red

button and squeezespray gun trigger to releaseretained

high water pressure.

,_. WARNING The high pressure stream of water that

this equipment produces could cut through skin

and its underlying tissues, resulting in serious

injury and possible amputation.

Spraygun traps high water pressure,evenwhen engine is

stopped and water is disconnected, which could result in

serious injury.

* Keephighpressurehoseconnectedto pumpandspraygun

whilesystemispressurized.

* ALWAYSpointspraygunin safedirection,pressredbutton

andsqueezesprayguntriggerto releasehighpressure,every

timeyoustopengine.

Removedetergent siphoning hosefrom barbedfitting

on pump.

Using a firm, blunt object 7/64" in diameter or smaller,

by at least 1" long, such as an Alien wrench, slowly

insert the object into the barbed fitting until you meet

resistance.This resistance is the check ball.

5. Slowly push down until you feel the ball move slightly,

push no more than 1/8". Slight pressure may be

requiredto freethe ball.

6. Repeatsteps 4 and 5 if necessary.

7. Reinstall detergent siphoning hose onto barb fitting.

8. Treatwith PumpSaveras described in Protecting the

Pumpduring storage to prevent reoccurrence.

CheckSprayGun

Examinehoseconnectionto spray gun and makesure it is

secure.Testtrigger by pressingit and makingsure it springs

back into placewhenyou releaseit. Donot depressred button

andtest trigger. You should not be ableto press trigger.

Replacespray gun immediatelyif it fails anyof thesetests.

Selector NozzleMaintenance

A pulsing sensationfelt while squeezingthe spray gun trigger

may be causedby excessivepump pressure.Theprincipal

causeof excessivepump pressure is a nozzleclogged or

restricted with foreign materials, such asdirt, etc. To correct

the problem, immediately cleanthe nozzlesfollowing these

instructions:

1. Shut off engine and turn off water supply.

2. ALWAYSpoint spray gun in a safe direction, press red

button and and squeezespray gun trigger to release

retainedhigh water pressure.

,_. WARNING The high pressure stream of water that

this equipment produces could cut through skin

and its underlying tissues, resulting in serious

injury and possible amputation.

Spraygun traps high water pressure,evenwhen engine is

stopped and water is disconnected, which could result in

serious injury.

* Keephighpressurehoseconnectedto pumpandspraygun

whilesystemispressurized.

* ALWAYSpointspraygunin safedirection,pressredbutton

andsqueezesprayguntriggerto releasehighpressure,every

timeyoustopengine.

Removeselector nozzlefrom end of nozzleextension.

Use a small paper clip to free anyforeign material

clogging or restricting each nozzle(A) in the selector

nozzle.

Removenozzleextensionfrom spray gun.

Using a garden hose, remove additional debris by back

flushing water through nozzleextension. Backflush

between 30 to 60 seconds.

7. Reinstall selector nozzleinto nozzleextension.

8. Reconnect nozzleextensionto spray gun.

9. Make sure garden hose is connectedto water inlet.

Checkthat high pressure hoseis connected to spray gun

and pump. Turn on water.

10. Start enginefollowing instructions How to Start Your

Pressure Washer.

11. Test pressurewasher by operating in eachspray pattern.

O-Ring Maintenance

Purchasean O-Ring RepairKit, item 7175116, atyour local

Searsor by calling 1-800-4-1VlY-NOME(4fig-4fifi3) or online

atwww.sears.com. It is not includedwith the pressure

washer. This kit includes replacemento-rings and a water

inlet filter. Refer to the instruction sheet provided in the kit to

serviceyour unit's o-rings.

_i_WARNING The high pressure stream of water that

this equipment produces could cut through skin

and its underlying tissues, resulting in serious

injury and possible amputation.

• NEVERrepairleakingconnectionswithsealantofanykind.

Replaceo-ringor seal.

ENGINEMAINTENANCE

_i_WARNING Unintentionalsparking could causefire or

'_dh electric shock resulting in death or

serious injury.

WHENADJUSTINGORMAKINGREPAIRSTOYOURPRESSURE

WASHER

• Disconnectthe spark plug wire from the spark plug and place

the wire where it cannot contact spark plug.

WHENTESTINGFORENGINESPARK

• Useapproved spark plug tester.

• DONOTcheckfor sparkwith spark plug removed.

Oil

Oil Recommendations

We recommendthe use of Briggs & Stratton Warranty

Certifiedoils for best performance. Other high-quality

detergent oils are acceptableif classified for serviceSF,SG,

SH,SJ or higher. DONOTusespecial additives.

Outdoortemperatures determine the proper oil viscosity for

the engine.Usethe chart to selectthe best viscosity for the

outdoor temperature range expected.

104___506886 _coo__

32 .o

-4

-22

\ 40

;_30

_°_20

_m m 0

--_C °

-20

-30

* Below40°F(4°C)the useofSAE30will resultin hardstarting.

** Above80°F(27°C)theuseof 10W30maycauseincreasedoil

consumption.Checkoil levelmorefrequently.

O OTICE Synthetic oil meeting ILSACGF-2,API

certification mark and APIservice symbol with

"SJ/0F ENERGYCONSERVING"or higher, is an

acceptableoil at all temperatures. Useof synthetic oil

does not alter required oil changeintervals.

Page is loading ...

Craftsman 580.752830 Operating instructions

Brand: Craftsman

Model: 580.752830

Category: High-pressure cleaners

Type: Operating instructions

Download PDF

report

in other languages

español: Craftsman 580.752830 Instrucciones de operación

Craftsman 580.752830 Operating instructions

Craftsman 580.752830 Operating instructions

in other languages

Related papers

Other documents