Craftsman 247.88173 Owner's manual

Brand: Craftsman

Model: 247.88173

Category: Snow throwers

Type: Owner's manual

This manual is also suitable for

Operator's Manual

CRRFr MRN

24" SNOW THROWER

Model No. 247.88173

CAUTION" Before using this

product, read this manual and

follow all safety rules and operating

instructions.

,, SAFETY

o ASSEMBLY

OPERATION

MAINTENANCE

PARTS LIST

o ESPANOL

Sears Brands Management Corporation, Hoffman Estates, IL 60179, U.S.A.

Visit our website: www.craftsman.com FormNo.769-08174

(May24,2012)

WarrantyStatement.................... Page2

SafeOperationPractices.............. Pages3-6

Assembly......................... Pages8-11

Operation........................ Pages12-15

Service&Maintenance.............. Pages16-23

Off-SeasonStorage................... Page24

Troubleshooting...................... Page25

PartsList......................... Pages26-32

RepairProtectionAgreement............ Page37

Espa_ol............................. Page38

CRAFTSMANTWOYEARFULLWARRANTY

FORTWOYEARSfromthedateofpurchase,thisproductiswarrantedagainstanydefectsinmaterialorworkmanship.Defectiveproductwill

receivefreerepairorfreereplacementifrepairisunavailable.

Forwarrantycoverage details to obtain repairor replacement,visit the website: www.craftsman.com

This warranty covers ONLYdefects in materialandworkmanship. Warrantycoverage does NOTinclude:

• Expendableitemsthatcanwearoutfromnormalusewithinthewarrantyperiod,includingbutnotlimitedtoaugers,augerpaddles,drift

cutters,skidshoes,shaveplate,shearpins,sparkplug,air cleaner,belts,andoil filter.

• Standardmaintenanceservicing,oilchanges,or tune-ups.

• Tirereplacementor repaircausedbypuncturesfromoutsideobjects,suchasnails,thorns,stumps,or glass.

• Tireor wheelreplacementor repairresultingfromnormalwear,accident,orimproperoperationor maintenance.

Repairsnecessarybecauseof operatorabuse,includingbutnotlimitedtodamagecausedbyover-speedingtheengine,or fromimpacting

objectsthat bendtheframe,augershaft,etc.

• Repairsnecessarybecauseof operatornegligence,includingbutnotlimitedto,electricalandmechanicaldamagecausedbyimproper

storage,failureto usethepropergradeandamountofengineoil,or failureto maintaintheequipmentaccordingtotheinstructionscontained

intheoperator'smanual.

• Engine(fuelsystem)cleaningor repairscausedbyfueldeterminedto becontaminatedoroxidized(stale).Ingeneral,fuelshouldbeused

within30 daysof itspurchasedate.

Normaldeteriorationandwearoftheexteriorfinishes,or productlabelreplacement.

Thiswarrantyisvoidifthisproductiseverusedwhileprovidingcommercialservicesor if rentedtoanotherperson.

Thiswarrantygivesyouspecificlegalrights,andyoumayalsohaveotherrightswhichvaryfromstatetostate.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

EngineOilType: 5W-30

EngineOilCapacity: 20ounces

FuelCapacity: 2Quarts

SparkPlug: F6RTC(951-10292)

SparkPlugGap: .020"to.030"

Model Number.................................................................

Serial Number.................................................................

Dateof Purchase.............................................................

Recordthemodelnumber,serialnumber

anddateof purchaseabove

©SearsBrands,LLC

Thissymbolpointsoutimportantsafetyinstructionswhich,if not

followed,couldendangerthepersonalsafetyand/orpropertyof

yourselfandothers.Readandfollowall instructionsin thismanual

beforeattemptingtooperatethismachine.Failuretocomplywith

theseinstructionsmayresultin personalinjury.Whenyouseethis

symbol,HEEDITSWARNING!

CALIFORNIA PROPOSITION 65

EngineExhaust,someof itsconstituents,andcertainvehicle

componentscontainoremitchemicalsknowntoStateofCalifornia

tocausecancerandbirthdefectsorotherreproductiveharm,

Thismachinewasbuilttobeoperatedaccordingtothesafeopera-

tionpracticesinthis manual.Aswithanytypeof powerequipment,

carelessnessorerroron thepartoftheoperatorcanresultin serious

injury.Thismachineiscapableofamputatingfingers,hands,toes

andfeetandthrowingdebris.Failuretoobservethefollowingsafety

instructionscouldresultin seriousinjuryor death.

Your Responsibility--Restrict theuseofthispowermachineto

personswhoread,understandandfollowthewarningsand instruc-

tionsin thismanualandon themachine,

SAVE THESE INSTRUCTIONS!

TRAiNiNG

• Read,understand,andfollowall instructionson themachineand

in themanual(s)beforeattemptingtoassembleandoperate.

Failuretodo socan resultinseriousinjurytotheoperatorand/

orbystanders.Keepthismanualin asafeplaceforfutureand

regularreferenceandfororderingreplacementparts.

• Befamiliarwithall controlsandtheirproperoperation.Knowhow

tostopthemachineanddisengagethemquickly.

• Neverallowchildrenunder14yearsofagetooperatethis

machine.Children14andovershouldreadandunderstandthe

instructionsandsafeoperationpracticesin thismanualandon

themachineandbe trainedandsupervisedbyanadult.

Neverallowadultstooperatethis machinewithoutproper

instruction.

• Thrownobjectscancauseseriouspersonalinjury.Planyour

snow-throwingpatterntoavoiddischargeof materialtoward

roads,bystandersandthelike.

Keepbystanders,petsandchildrenat least75feetfromthe

machinewhileitisin operation.Stopmachineifanyoneenters

thearea.

• Exercisecautiontoavoidslippingor falling,especiallywhen

operatingin reverse.

PREPARATION

Thoroughlyinspecttheareawheretheequipmentistobeused.

Removeall doormats,newspapers,sleds,boards,wiresandother

foreignobjects,whichcouldbe trippedoverorthrownbytheauger/

impeller.

• Alwayswearsafetyglassesor eyeshieldsduringoperationand

whileperformingan adjustmentor repairto protectyoureyes.

Thrownobjectswhichricochetcancauseseriousinjurytothe

eyes.

Donotoperatewithoutwearingadequatewinteroutergarments.

Donotwearjewelry,longscarvesorotherlooseclothing,which

couldbecomeentangledin movingparts.Wearfootwearwhich

willimprovefootingonslipperysurfaces.

Usea groundedthree-wireextensioncordand receptacleforall

machineswithelectricstartengines.

Disengageall controlleversbeforestartingtheengine.

Adjustcollectorhousingheighttocleargravelorcrushedrock

surfaces.

• Neverattempttomakeanyadjustmentswhileengineis running,

exceptwherespecificallyrecommendedintheoperator'smanual.

Letengineandmachineadjusttooutdoortemperaturebefore

startingtoclearsnow.

SafeHandlingof Gasoline

Toavoidpersonalinjuryor propertydamageuseextremecarein

handlinggasoline.Gasolineisextremelyflammableandthevaporsare

explosive.Seriouspersonalinjurycanoccurwhengasolineisspilled

onyourselfor yourclotheswhichcanignite. Washyourskinand

changeclothesimmediately.

• Useonlyan approvedgasolinecontainer.

• Extinguishallcigarettes,cigars,pipesandothersourcesof

ignition.

• Neverfuelmachineindoors.

• Neverremovegascapor addfuelwhiletheengineishotor

running.

• Allowenginetocoolat leasttwo minutesbeforerefueling.

• Neveroverfillfueltank.Filltankto nomorethan1/2inchbelow

bottomoffillernecktoprovidespaceforfuelexpansion.

• Replacegasolinecapandtightensecurely.

• Ifgasolineisspilled,wipeitoff theengineandequipment.Move

machinetoanotherarea.Wait5 minutesbeforestartingthe

engine.

• Neverstorethemachineorfuelcontainerinsidewherethereisan

openflame,sparkor pilotlight(e.g.furnace,waterheater,space

heater,clothesdryeretc.).

• Allowmachinetocoolatleast5 minutesbeforestoring.

• Neverfillcontainersinsidea vehicleor onatruckor trailerbed

witha plasticliner.Alwaysplacecontainersonthegroundaway

fromyourvehiclebeforefilling.

• If possible,removegas-poweredequipmentfromthetruckor

trailerandrefuelitontheground.Ifthis isnotpossible,thenrefuel

suchequipmenton atrailerwitha portablecontainer,ratherthan

froma gasolinedispensernozzle.

• Keepthenozzlein contactwiththerimofthefueltankor

containeropeningatalltimesuntilfuelingiscomplete.Donotuse

a nozzlelock-opendevice.

OPERATION

• Donotputhandsorfeetnear rotatingparts,in theauger/impeller

housingor chuteassembly.Contactwiththerotatingpartscan

amputatehandsandfeet.

• Theauger/impellercontrolleverisa safetydevice.Neverbypass

itsoperation.Doingsomakesthemachineunsafeandmaycause

personalinjury.

• Thecontrolleversmustoperateeasilyin bothdirectionsand

automaticallyreturntothedisengagedpositionwhenreleased.

• Neveroperatewitha missingor damagedchuteassembly.Keep

all safetydevicesin placeandworking.

• Neverrunanengineindoorsor ina poorlyventilatedarea.Engine

exhaustcontainscarbonmonoxide,anodorlessanddeadlygas.

• Donotoperatemachinewhileundertheinfluenceofalcoholor

drugs.

• Mufflerandenginebecomehotandcancausea burn.Donot

touch.Keepchildrenaway.

• Exerciseextremecautionwhenoperatingon orcrossinggravel

surfaces.Stayalertforhiddenhazardsor traffic.

Exercisecautionwhenchangingdirectionandwhileoperatingon

slopes.Donotoperateon steepslopes.

Planyoursnow-throwingpatternto avoiddischargetowards

windows,walls,carsetc.Thus,avoidingpossibleproperty

damageor personalinjurycausedbya ricochet.

Neverdirectdischargeatchildren,bystandersand petsor allow

anyoneinfrontofthemachine.

Donotoverloadmachinecapacitybyattemptingtoclearsnowat

toofastof a rate.

Neveroperatethis machinewithoutgoodvisibilityorlight.Always

be sureofyourfootingand keepa firmholdonthehandles.Walk,

neverrun.

Disengagepowertotheauger/impellerwhentransportingor not

in use.

Neveroperatemachineathightransportspeedson slippery

surfaces.Lookdownand behindand usecarewhenbackingup.

Ifthemachineshouldstarttovibrateabnormally,stoptheengine,

disconnectthesparkplugwireandgrounditagainsttheengine.

Inspectthoroughlyfordamage.Repairanydamagebefore

startingandoperating.

Disengageall controlleversandstopenginebeforeyouleave

theoperatingposition(behindthehandles).Waituntiltheauger/

impellercomestoa completestopbeforeuncloggingthechute

assembly,makinganyadjustments,or inspections.

Neverputyourhandinthedischargeor collectoropenings.Do

notunclogchuteassemblywhileengineisrunning.Shutoff

engineand remainbehindhandlesuntilall movingpartshave

stoppedbeforeunclogging.

Useonlyattachmentsandaccessoriesapprovedbythemanufac-

turer(e.g.wheelweights,tirechains,cabsetc.). Forinformation

concerningtheseitems,call1-800-469-4663.

Whenstartingengine,pullcordslowlyuntilresistanceisfelt,then

pull rapidly.Rapidretractionofstartercord(kickback)willpull

handandarmtowardenginefasterthanyoucanletgo.Broken

bones,fractures,bruisesor sprainscouldresult.

Ifsituationsoccurwhichare notcoveredinthismanual,usecare

andgoodjudgment.

Forin-warrantysafety,operationor maintenancequestions,or to

orderpartsandscheduleservice,call 1-800-469-4663.

CLEARING A CLOGGED DISCHARGE CHUTE

Handcontactwiththe rotatingimpellerinsidethedischargechute

is themostcommoncauseofinjuryassociatedwithsnowthrowers.

Neveruseyourhandtocleanoutthedischargechute.

Toclearthechute:

1. SHUTTHEENGINEOFF!

2. Wait 10secondstobe suretheimpellerbladeshavestopped

rotating.

3. Alwaysusea clean-outtool,notyourhands.

MAINTENANCE & STORAGE

• Nevertamperwithsafetydevices.Checktheirproperoperation

regularly.Refertothemaintenanceandadjustmentsectionsof

thismanual.

• Beforecleaning,repairing,or inspectingmachinedisengageall

controlleversandstoptheengine.Waituntiltheauger/impeller

cometoa completestop.Disconnectthe sparkplugwireand

groundagainsttheenginetopreventunintendedstarting.

Checkboltsand screwsforpropertightnessatfrequentintervals

tokeepthemachineinsafeworkingcondition.Also,visually

inspectmachineforanydamage.

Donotchangetheenginegovernorsettingor over-speedthe

engine.Thegovernorcontrolsthe maximumsafeoperatingspeed

oftheengine.

Snowthrowershaveplatesand skidshoesaresubjecttowear

anddamage.Foryoursafetyprotection,frequentlycheckall

componentsand replacewithoriginalequipmentmanufacturer's

(OEM)partsonlyaslistedinthe Partspagesof thisoperator's

manual.Useofpartswhichdonotmeettheoriginalequipment

specificationsmayleadto improperperformanceandcompro-

misesafety!

Checkcontrolleversperiodicallytoverifytheyengageanddisen-

gageproperlyandadjust,ifnecessary.Refertotheadjustment

sectioninthisoperator'smanualforinstructions.

Maintainor replacesafetyandinstructionlabels,asnecessary.

Observeproperdisposallawsand regulationsforgas,oil,etc.to

protecttheenvironment.

Priorto storing,runmachinea few minutestoclearsnowfrom

machineand preventfreezeupofauger/impeller.

Neverstorethemachineorfuelcontainerinsidewherethereisan

openflame,sparkorpilotlightsuchasa waterheater,furnace,

clothesdryeretc.

Alwaysrefertotheoperator'smanualforproperinstructionson

off-seasonstorage.

Checkfuelline,tank,cap,andfittingsfrequentlyforcracksor

leaks.Replaceifnecessary.

Donotcrankenginewithsparkplugremoved.

AccordingtotheConsumerProductsSafetyCommission(CPSC)

andtheU.S.EnvironmentalProtectionAgency(EPA),thisproduct

hasan AverageUsefulLifeof seven(7)years,or 60hoursof

operation.AttheendoftheAverageUsefulLifehavethemachine

inspectedannuallybyan authorizedservicedealertoensurethat

allmechanicalandsafetysystemsareworkingproperlyand not

wornexcessively.Failuretodo socanresultinaccidents,injuries

ordeath.

DO NOT MODIFY ENGINE

Toavoidseriousinjuryor death,donotmodifyengineinanyway.

Tamperingwiththegovernorsettingcanleadtoa runawayengineand

causeittooperateat unsafespeeds.Nevertamperwithfactorysetting

ofenginegovernor.

NOTICE REGARDING EMiSSiONS

EngineswhicharecertifiedtocomplywithCaliforniaandfederal

EPAemissionregulationsforSORE(SmallOff RoadEquipment)are

certifiedtooperateon regularunleadedgasoline,and mayinclude

thefollowingemissioncontrolsystems:EngineModification(EM),

OxidizingCatalyst(OC),SecondaryAirInjection(SAI)and ThreeWay

Catalyst(TWO)if soequipped.

SPARK ARRESTOR

Thismachineisequippedwithaninternalcombustionengineand

shouldnotbe usedonornearanyunimprovedforest-covered,

brush-coveredorgrass-coveredlandunlesstheengine'sexhaust

systemisequippedwitha sparkarrestormeetingapplicablelocalor

statelaws(ifany)

Ifa sparkarrestorisused,itshouldbe maintainedin effectiveworking

orderbytheoperator.IntheStateofCaliforniatheaboveis required

bylaw(Section4442oftheCaliforniaPublicResourcesCode).Other

statesmayhavesimilarlaws.Federallawsapplyonfederallands.

A sparkarrestorforthemufflerisavailablethroughyournearestSears

PartsandRepairServiceCenter.

SAFETY SYMBOLS

Thispagedepictsanddescribessafetysymbolsthatmayappearonthisproduct. Read,understand,andfollowall instructionson themachine

beforeattemptingtoassembleandoperate.

. +

"JIp

READ THE OPERATOR'S MANUAL(S)

Read, understand, and follow all instructions in the manual(s) before attempting to assemble and

operate

WARNING-- ROTATING BLADES

Keep hands out of inlet and discharge openings while machine is running. There are rotating blades

inside

WARNING-- ROTATING BLADES

Keep hands out of inlet and discharge openings while machine is running. There are rotating blades

inside

WARNING-- ROTATING AUGER

Do not put hands or feet near rotating parts, in the auger/impeller housing or chute assembly.

Contact with the rotating parts can amputate hands and feet.

WARNING--THROWN OBJECTS

This machine may pick up and throw objects which can cause serious personal injury.

WARNING--GASOLINE ISFLAMMABLE

Allow the engine to cool at least two minutes before refueling.

WARNING-- CARBON MONOXIDE

Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon

monoxide, an odorless and deadly gas+

WARNING-- ELECTRICAL SHOCK

Do not use the engine's electric starter in the rain

Thispageleftintentionallyblank.

NOTE:Referencesto rightorleft sideofthesnowthrowerare

determinedfrombehindtheunitintheoperatingposition(standing

directlybehindthesnowthrower,facingthe handlepanel).

REMOVING FROM CARTON

1. Cutthecornersofthecartonandlaythesidesflaton theground.

Removeanddiscardallpackinginserts.

2. Movethesnowthroweroutofthecarton.

3. Makecertainthecartonhasbeencompletelyemptiedbefore

discardingit.

ASSEMBLY

1. Placetheshiftleverin theForward-6position.

2. Observethe lowerrearareaofthesnowthrowertobesureboth

cablesarealignedwith rollerguidesbeforepivotingthehandle

upward.See Figure1.

NOTE:Makecertaintheupperendsofeachcableare seatedproperly

in itsbracket.

3. Securethehandlebytighteningtheplasticwingknoblocatedon

boththeleftand rightsidesofthehandle.SeeFigure2. Remove

anddiscardanyrubberbands,ifpresent.Theyareforpackaging

purposesonly.

4. Removewingnutandhexscrewfromchutecontrolheadand

clevispinandcotterpinfromchutesupportbracket.Position

chute(forward-facing)overchutebase.SeeFigure3.

/ s

Figure2

Chute Control Head

pport

Bracket

Figure3

Figure1

5. Placechuteontochutebaseandsecurechutecontrolheadto

chutesupportbracketwithclevispinandcotterpin removed

earlier.SeeFigure4.

6. Finishsecuringchutecontrolheadtochutesupportbracketwith

wingnutandhexscrewremovedearlier.See Figure5.

7. Insertthechutedirectionalcontrolintothesupportbracketonthe

rearofthedashpanel.SeeFigure6.

8. Removethehairpinclipfromtherearofthechutecontrolhead.

9. Insertchutedirectionalcontrolintorearofthechutecontrolhead.

Securethechutedirectionalcontroltothechutecontrolheadwith

thehairpinclipremovedearlier.SeeFigure7.

Figure4

Figure6

Figure7

Figure5

SET-UP

Chute Clean-Out Tool

Achute clean-out tool isfastenedtothetopoftheaugerhousing

witha mountingclip.SeeFigure8.Thetoolisdesignedtocleara

chuteassemblyoficeandsnow.Thisitemisfastenedwitha cabletie

atthefactory.Cutthecabletiebeforeoperatingthesnowthrower.

Neveruseyourhandsto cleara cloggedchuteassembly.Shut

offengineand remainbehindhandlesuntilall movingpartshave

stoppedbeforeusingtheclean-outtooltoclearthechuteassembly.

Tire Pressure

Underanycircumstancedo notexceedmanufacturer'srecom-

mendedpsi. Equaltirepressureshouldbe maintainedatall times.

Excessivepressurewhenseatingbeadsmaycausetire/rim

assemblytoburstwithforcesufficienttocauseseriousinjury.Refer

tosidewallof tirefor recommendedpressure.

.........................ii

:: :/4Y.....

Chute Clean-Out

Tool

Figure8

Thetiresareover-inflatedforshippingpurposes.Checkthetire

pressurebeforeoperatingthesnowthrower.Refertothetiresidewall

fortiremanufacturer'srecommendedpsianddeflate(or inflate)the

tiresasnecessary.

NOTE:Equaltirepressureistobe maintainedat alltimesforperfor-

mancepurposes.

ADJUSTMENTS

Skid Shoes

Thesnowthrowerskidshoesareadjustedupwardatthefactoryfor

shippingpurposes.Adjustthemdownward,ifdesired,priortooperat-

ingthesnowthrower.

It isnotrecommendedthatyouoperatethis snowthrowerongravel

asitcaneasilypickup andthrowloosegravel,causingpersonal

njuryordamageto thesnowthrowerand surroundng property.

• Forclosesnowremovalona smoothsurface,raiseskidshoes

higherontheaugerhousing.Referto Figure9.

• Usea middleor lowerpositionwhentheareatobe clearedis

uneven,suchasa graveldriveway.

Smooth Surface

Surface

Figure9

NOTE:If youchoosetooperatethesnowthrowerona gravelsurface,

keeptheskidshoesin positionformaximumclearancebetweenthe

groundandtheshaveplate.

Toadjusttheskidshoes:

1. Loosenthefourhexnuts(twooneachside)andcarriagebolts.

Moveskidshoestodesiredposition. SeeFigure9.

2, Makecertaintheentirebottomsurfaceof skidshoeisagainstthe

groundtoavoidunevenwearontheskidshoes,

3, Refightennutsandboltssecurely,

Chute Assembly

Thedistancesnowisthrowncanbeadjustedbychangingtheangleof

thechuteassembly,Todo so:

1, Stoptheenginebyremovingtheignitionkeyandloosenthe

plasticwingknobfoundontheleft sideofthechuteassembly.

2, Pivotthechuteupwardordownwardbeforeretighteningthewing

knob,See Figure10,

Auger Control

Priortooperatingyoursnowthrower,carefullyreadandfollowall

instructionsbelow,Performalladjustmentstoverifyyoursnow

throwerisoperatingsafelyand properly,

Figure10

Checktheadjustmentoftheaugercontrolasfollows:

1. Theaugercontrolislocatedontheleft handle.SeeFigure11

inset.Whentheaugercontrolis releasedandin thedisengaged

"up"position,thecableshouldhaveverylittleslack.Itshould

NOTbetight.

2. Ina well-ventilatedarea,startthesnowthrowerengine.Referto

StartingtheEngineintheOperationsection.

3. Whilestandingintheoperator'sposition(behindthe snow

thrower),engagetheauger.

4. Allowtheaugertoremainengagedforapproximatelyten(10)

secondsbeforereleasingtheaugercontrol.Repeatthisseveral

times.

5. Withtheaugercontrolin thedisengaged"up"position,walktothe

frontofthemachine.

6. Confirmthattheaugerhascompletelystoppedrotatingand

showsNOsignsofmotion.If theaugershowsANYsignsof

rotating,immediatelyreturntotheoperator'spositionandshutoff

theengine.WaitforALLmovingpartstostopbeforeadjustingthe

augercontrol.

7. Toreadjustthecontrolcable,loosentheupperhexboltonthe

augercablebracket.SeeFigure11.

8. Positionthebracketupwardtoprovidemoreslack(or downward

toincreasecabletension).

9. Retightentheupperhexbolt.

10. Repeatsteps2-6aboveto verifyproperadjustmenthasbeen

achieved.

Figure11

Drive Control

ChuteAssembly

\\\

_ugerHousing_\\_

,L!,

GasCap

Oil Fill

Augers

Shift Lever

"Skid Shoe

Auger Control

Chute Directional Control

Recoil Starter

Handle

Throttle

Control

Choke

Control

Nowthat youhavesetupyoursnowthrower,it'simportanttobecome

acquaintedwith itscontrolsandfeatures.RefertoFigure12.

SHIFT LEVER

Figure12

:lectric Start

Button

Oil Drain Electric Starter Outlet

,.. j

KEY

Thekeyisa safetydevice.It mustbefully _,'t_

insertedinorderfortheenginetostart. Remove

thekeywhenthesnowthrowerisnotinuse.

1 2345 6

NOTE:Donotturntheignitionkeyinan attempt

to starttheengine.Doingsomaycauseitto

break.

Theshiftleverislocatedonthedashpanel.Placetheshiftleverinto

anyofeightpositionstocontrolthedirectionoftravelandground

speed.

Forward

Yoursnowthrowerhassixforward(F)speeds.Positionone(1)is the

slowestandpositionsix(6) isthefastest.

Reverse

Yoursnowthrowerhastwo reverse(R)speeds.One(1)istheslower

andtwo(2) isthefaster.

CHOKE CONTROL

Thechokecontrolisfoundon therearofthe

engineand isactivatedbyturningthe rotary

chokeknobtotheCHOKEposition.Activating

thechokecontrolclosesthechokeplateon the

carburetorandaidsinstartingtheengine.

Meets ANSi Safety Standards

CraftsmanSnowThrowersconformtothesafetystandardoftheAmericanNationalStandardsInstitute(ANSI).

THROTTLE CONTROL

aiW'

Thethrottlecontrolis locatedon therearoftheengine.It regulatesthe

speedoftheengineandwillshutoff theenginewhenmovedintothe

STOPposition.

r 1

Depressingtheprimerforcesfueldirectlyinto ___144

theengine'scarburet°rt° aid inc°'dweather [k, _"_'-_ 3" Jstarting.

RECOIL STARTER HANDLE

Thishandleisusedto manuallystarttheengine.

ELECTRIC STARTER BUTTON

Pressingtheelectricstarterbuttonengagestheengine'selectric

starterwhenpluggedintoa 120Vpowersource.

ELECTRIC STARTER OUTLET

Requirestheuseof athree-prongoutdoorextensioncord(included)

anda 120Vpowersource/walloutlet.

OIL FILL

Engineoil levelcanbecheckedand oiladdedthroughtheoilfill.

GAS CAP

Unthreadthegascaptoaddgasolinetothefueltank.

AUGER

Whenengaged,theaugerbladesrotateand drawsnowintotheauger

housing.

CHUTE ASSEMBLY

Snowdrawnintotheaugerhousingisdischargedoutthechute

assembly.

AUGER CONTROL

Theaugercontrolislocatedon thelefthandle.Squeezethecontrol

gripagainstthehandletoengagetheaugerand startsnowthrowing

action.Releasetostop.

DRIVE CONTROL/AUGER CONTROL LOCK

J DRIVE

CONTROL

Thedrivecontrolis locatedon therighthandle.Squeezethecontrol

gripagainstthehandletoengagethewheeldrive.Releasetostop.

Thedrivecontrolalsolockstheaugercontrolsoyoucanoperate

thechutedirectionalcontrolwithoutinterruptingthesnowthrowing

process.If theaugercontrolisengagedsimultaneouslywiththedrive

control,theoperatorcanreleasetheaugercontrol(onthelefthandle)

andtheaugerswillremainengaged.Releasebothcontrolstostopthe

augersandwheeldrive.

NOTE:Alwaysreleasethedrivecontrolbeforechangingspeeds.

Failureto dosowillresultinincreasedwearon yourmachine'sdrive

system.

OVERHEAD CHUTE DIRECTIONAL CONTROL

/_CCHUTE DIRECTIONAL CONTROL

ADJUSTABLE

DISCHARGE CHUTETILTDISCHARGE

LEFT

_ J

The overhead chute directionalcontrol is located in the center ofthe

snow thrower between the handle panel and lowerhandle. To change

the direction inwhich snow is thrown,rotate the chute directional

control.

SKID SHOES

Positiontheskidshoesbasedonsurfaceconditions.Adjustupward

forhard-packedsnow.Adjustdownwardwhenoperatingon gravelor

crushedrocksurfaces.

CLEAN-OUT TOOL

Neveruseyourhandstocleara cloggedchuteassembly.Shut

off engineandremainbehindhandlesuntilall movingpartshave

stoppedbeforeusingtheclean-outtooltoclearthechuteassembly.

Thechuteclean-outtoolisconvenientlyfastenedtotherearofthe

augerhousingwitha mountingclip. Shouldsnowandicebecome

lodgedin thechuteassemblyduringoperation,proceedasfollowsto

safelycleanthechuteassemblyandchuteopening:

1. ReleaseboththeAugerControlandtheDriveControl.

2. Stoptheenginebyremovingtheignitionkey.

3. Removetheclean-outtoolfromtheclipwhichsecuresittothe

rearoftheaugerhousing.

4. Usetheshovel-shapedendof theclean-outtooltodislodgeand

scoopanysnowand icewhichhasformedin andnearthechute

assembly.

5. Refastentheclean-outtooltothemountingclipontherearof

theaugerhousing,reinserttheignitionkeyandstartthesnow

thrower'sengine.

6. Whilestandingintheoperator'sposition(behindthesnow

thrower),engagetheaugercontrolfora fewsecondstoclearany

remainingsnowandicefromthechuteassembly.

BEFORE STARTING ENGINE

Read,understand,andfollowall instructionsandwarningson the

machineand inthismanualbeforeoperating.

Oil

Theunit wasshippedwith oil inthe engine.Checkoil levelbefore

eachoperationtoensureadequateoil intheengine.Forfurther

instructions,refertothe stepson page16.

NOTE:Besuretochecktheengineon alevelsurfacewiththeengine

stopped.

1. Removetheoil fillercap/dipstickandwipethedipstickclean.

2. insertthecap/dipstickintotheoilfillerneck,butdo NOTscrewit

in.

3. Removetheoil fillercap/dipstick,ifthelevelislow,slowlyadd

oil (5%30, withaminimumclassificationof SF/SG)untiloil level

registersbetweenhigh(H) andlow(L).

NOTE:Donotoverfill.Overfillingwithoil mayresultinenginesmoking,

hardstartingor sparkplugfouling.

4. Replaceandtightencap/dipstickfirmlybeforestartingengine.

Gasoline

Useautomotivegasoline(unleadedor lowleadedtominimizecombus-

tionchamberdeposits)witha minimumof87octane.Gasolinewith

upto 10%ethanolor 15%MTBE(MethylTertiaryButylEther)canbe

used.Neveruseanoil/gasolinemixtureor dirtygasoline.Avoidgetting

dirt,dust,or waterinthefueltank.DONOTuseE85gasoline.

• Refuelina well-ventilatedareawiththeenginestopped.Donot

smokeorallowflamesor sparksin theareawheretheengineis

refueledor wheregasolineisstored.

• Donotoverfillthefueltank.After refueling,makesurethetank

capisclosedproperlyandsecurely.

• Becarefulnotto spillfuelwhenrefueling.Spilledfuelorfuelvapor

mayignite,ifanyfuelisspilled,makesuretheareaisdrybefore

startingtheengine.

• Avoidrepeatedorprolongedcontactwithskinor breathingof

)or.

Useextremecarewhenhandlinggasoline.Gasolineisextremely

flammableandthevaporsare explosive.Neverfuelthemachine

indoorsorwhiletheengineishotor running.Extinguishcigarettes,

cigars,pipesandothersourcesof ignition.

1. Cleanaroundfuelfillbeforeremovingcaptofuel.

2. A fuellevelindicatorislocatedinthefueltank.SeeFigure12

inset.Becarefulnottooverfill.Filltank untilfuelreachesthefuel

levelindicatortoallowspaceforfuelexpansion.

STARTING THE ENGINE

Alwayskeephandsandfeetclearof movingparts.Donotusea

pressurizedstartingfluid.Vaporsare flammable.

NOTE:Allowtheenginetowarmupfora fewminutesafter starting.

Theenginewillnotdevelopfullpoweruntilitreachesoperating

temperatures.

1. Makecertainboththeaugercontrolanddrivecontrolarein the

disengaged(released)position.

2. insertkeyintoslot.Makesureitsnapsintoplace.Donotattempt

toturnthekey.

NOTE:Theenginecannotstartwithoutthekeyfullyinsertedintothe

ignitionswitch.

Electric Starter

Theoptionalelectricstarterisequippedwitha groundedthree-wire

powercordand plug,andisdesignedtooperateon 120voltAC

householdcurrent.Itmustbe usedwitha properlygroundedthree-

prongreceptacleatall timestoavoidthepossibilityofelectricshock.

Followall instructionscarefullypriortooperatingtheelectricstarter.

DONOTuseelectricstarterinthe rain.

Determinethatyourhome'swiringisa three-wiregroundedsystem.

Aska licensedelectricianifyouarenotcertain.

Ifyouhavea groundedthree-prongreceptacle,proceedasfollows.

Ifyoudonothavetheproperhousewiring,DONOTusetheelectric

starterunderanyconditions.

1. Plugtheextensioncordintotheoutletlocatedon theengine's

surface.Plugtheotherendof extensioncordintoa three-prong

120-volt,grounded,ACoutletina well-ventilatedarea.

2. Movethrottlecontrolto FAST(rabbit)_T position.

3. MovechoketotheCHOKEIJl position(coldenginestart).If

engineiswarm,placechokein RUNposition.

4. Pushprimerthree(3)times,makingsuretocoverventholein

primerbulbwhenpushing.If engineiswarm,pushprimeronly

once.Alwayscoverventholewhenpushing.Coolweathermay

requireprimingtobe repeated.

5. Pushstarterbuttontostartengine.Oncetheenginestarts,im-

mediatelyreleasestarterbutton.Electricstarterisequippedwith

thermaloverloadprotection;systemwilltemporarilyshut-downto

allowstartertocoolifelectricstarterbecomesoverloaded.

6. Astheenginewarms,slowlyrotatethechokecontroltoRUN

position.If theenginefalters,restartengineandrunwithchoke

athalf-chokepositionfora shortperiodoftime,andthenslowly

rotatethechokeintoRUNposition.

7. Afterengineisrunning,disconnectpowercordfromelectric

starter.Whendisconnecting,alwaysunplugtheendatthewall

outletbeforeunpluggingtheoppositeendfromtheengine.

Recoil Starter

Donotpullthestarterhandlewhiletheenginerunning.

1. Movethrottlecontrolto FAST(rabbit)_J_ position.

2. MovechoketotheCHOKEI,'_¢1position(coldenginestart).If

engineiswarm,placechokein RUNposition.

3. Pushprimerthree(3)times,makingsuretocoverventholewhen

pushing.Ifengineiswarm,pushprimeronlyonce.Alwayscover

ventholewhenpushing.Coolweathermayrequireprimingtobe

repeated.

4. Pullgentlyonthe starterhandleuntilitbeginstoresist,then

pullquicklyandforcefullytoovercomethecompression.Do

notreleasethehandleandallowitto snapback.Returnrope

SLOWLYtooriginalposition.If required,repeatthisstep.

5. Astheenginewarms,slowlyrotatethechokecontroltoRUN

position.If theenginefalters,restartengineandrunwithchoke

athalf-chokepositionfora shortperiodoftime,andthenslowly

rotatethechokeintoRUNposition.

Toavoidunsupervisedengineoperation,neverleavethemachine

unattendedwiththeenginerunning.Turntheengineoffafteruseand

removekey.

STOPPING THE ENGINE

Afteryouhavefinishedsnow-throwing,runenginefora few minutes

beforestoppingtohelpdryoffanymoistureontheengine.

1. MovethrottlecontroltoOFFposition.

2. Removethekey.Removingthekeywillreducethepossibilityof

unauthorizedstartingoftheenginewhileequipmentisnotin use.

Keepthekeyina safeplace.Theenginecannotstartwithoutthe

key.

3. Wipeanymoistureawayfromthecontrolson theengine.

TO ENGAGE DRIVE

1. Withthethrottlecontrolinthe Fast(rabbit)'_ position,move

shiftleverintooneof thesix forward(F)positionsortwo reverse

(R)positions.Selecta speedappropriateforthesnowconditions

anda paceyou'recomfortablewith.

NOTE:Whenselectinga DriveSpeed,usetheslowerspeedsuntil

youarecomfortableandfamiliarwiththeoperationofthesnow

thrower.

2. Squeezethedrivecontrolagainstthehandleandthesnow

throwerwillmove.Releaseitanddrivemotionwillstop.

NOTE:NEVERrepositiontheshiftlever(changespeedsordirection

oftravel)withoutfirstreleasingthedrivecontrolandbringingthesnow

throwertoa completestop.Doingsowill resultin prematurewearto

thesnowthrower'sdrivesystem.

TO ENGAGE AUGER

1. Toengagetheaugerand startthrowingsnow,squeezetheauger

controlagainsttheleft handle.Releasetostoptheauger.

REPLACING SHEAR PINS

Eachaugerbladeissecuredtothespiralshaftwitha shearpinand

bow-tieclip. Ifanaugerbladestrikesaforeignobjector icejam,the

pinwillshearoff topreventdamagetotheblade.Ifanaugerblade

doesnotturn,checktoseeifits pinhasshearedoff.SeeFigure13.

NEVERreplacetheaugershearpinswithanythingotherthanSears

SKU#88389/0EMPartNo.738-04124Areplacementshearpins.

Anydamagetotheaugergearboxor othercomponentsasa resultof

[fang to dosow NOTbe coveredbyyoursnowthrowerswarranty.

Alwaysturnoff thesnowthrower'sengineandremovethekeypriorto

replacingshearpins.

s ¸......

Figure13

MAINTENANCE SCHEDULE

Beforeperforminganytypeofmaintenance/service,disengageall

controlsandstoptheengine.Waituntilallmovingpartshavecometo

acompletestop.Disconnectsparkplugwireandgrounditagainstthe

enginetopreventunintendedstarting.Alwayswearsafetyglassesduring

operationorwhileperforminganyadjustmentsorrepairs.

EachUseandevery5

hours

1st5 hours

Annuallyor 25 hours

Annuallyor 50 hours

Annuallyor 100hours

BeforeStorage

1. Engineoil level

2. Looseor missinghardware

3. Unitand engine.

1. Engineoil

1. Sparkplug

2. Controllinkagesandpivots

3. Wheels

4. GearshaftandAugershaft

1. Engineoil

1. Sparkplug

1. Fuelsystem

Followthemaintenanceschedulegivenbelow.Thischartdescribes

serviceguidelinesonly.UsetheServiceLogcolumntokeeptrackof

completedmaintenancetasks.Tolocate the nearest SearsService

Centeror to scheduleservice,simplycontactSearsat

1-800-4-MY-HOME®.

1. Check

2. Tightenor replace

3. Clean

1. Change

1. Check

2. Lubewithlightoil

3. Lubewithmultipurposeautogrease

4. Lubewithlightoil

1. Change

1. Runengineuntilit stopsfromlack

offuel

ENGINE MAINTENANCE

Checking Engine Oil

Beforelubricating,repairing,or inspecting,disengageall controls

Iandstopengine.Waituntilall movingpartshavecometo a complete

_stop.

NOTE: Checktheoil levelbeforeeachuseto besurecorrectoillevel

ismaintained.

Whenaddingoiltotheengine,referto viscositychart below.Engine

oilcapacityis 600ml(approx.20 oz.).Donotover-fill.Usea 4-stroke,

oran equivalenthighdetergent,premiumqualitymotoroilcertified

tomeetorexceedU.S.automobilemanufacturer'srequirementsfor

serviceclassificationSG,SRMotoroilsclassifiedSG,SFwillshow

thisdesignationonthecontainer.

1. Removetheoil fillercap/dipstickandwipethedipstickclean.

2. Insertthecap/dipstickintotheoilfillerneck,butdo NOTscrewit

in.

3. Removetheoil fillercap/dipstick.Iflevelislow,slowlyadd oiluntil

oil levelregistersbetweenhigh(H)andlow(L).SeeFigure14.

4. Replaceandtightencap/dipstickfirmlybeforestartingengine.

Changing Engine Oil

NOTE:Changetheengineoilafterthefirst5 hoursof operationand

oncea seasonorevery50hoursthereafter.

1. Drainfuelfromtankbyrunningengineuntilthefueltankisempty.

Besurefuelfillcapissecure.

1 •

_i!_!iiii_ii!i!jili iiiIiiiii_H

marks

Figure14

2. Placesuitableoil collectioncontainerunderoil drainplug.

3. Removeoil drainplug.SeeFigure15onnextpage.

4. Tipunittodrainoil intothecontainer.Usedoil mustbedisposed

ofata propercollectioncenter.

Usedoil isahazardouswasteproduct.Disposeofusedoil properly.

IDonotdiscardwithhouseholdwaste.Checkwithyourlocalauthori-

lties orSearsServiceCenterforsafedisposal/recyclingfacilities.

Reinstallthedrainplugandtightenit securely.

Refillwiththerecommendedoil andchecktheoil level.See

RecommendedOil Usagechart.Theengine'soil capacityis20

ounces.

(%-400 -200 0o 200 400

("c) -300 -200 -10° 0°

DONOTusenondetergentoilor 2-strokeengineoil.Itcouldshorten

theengine'sservicelife.

7. Reinstalltheoilfillercap/dipsticksecurely.

Oil Drain

Plug

Figure15

afterhandling usedoil.

Checking Spark Plug

DONOTcheckforsparkwithsparkplugremoved.DONOTcrank

enginewithsparkplugremoved.

Iftheenginehasbeenrunning,themufflerwillbevery hot.Becareful

nottotouchthemuffler.

NOTE: Checkthesparkplugoncea seasonorevery25hoursof

operation.Changethesparkplugoncea seasonor every100hours.

Toensureproperengineoperation,thesparkplugmustbe properly

gappedandfreeofdeposits.

1. Removethesparkplugbootandusea sparkplugwrenchto

removetheplug.See Figure16.

2. Visuallyinspectthesparkplug.Discardthesparkplugifthereis

apparentwear,orifthe insulatoriscrackedor chipped.Cleanthe

sparkplugwitha wirebrushifitisto be reused.

3. Measurethepluggapwitha feelergauge.Correctas necessary

bybendingsideelectrode.SeeFigure17.Thegapshouldbeset

to.02-.03inches(0.60-0.80ram).

4. Checkthatthe sparkplugwasherisingoodconditionandthread

thesparkplugin byhandtopreventcross-threading.

5. Afterthesparkplugisseated,tightenwitha sparkplugwrenchto

compressthewasher.

NOTE:Wheninstallinga newsparkplug,tighten1/2-turnafterthe

sparkplugseatstocompressthewasher.Whenreinstallinga used

sparkplug,tighten1/8-to 1/4-turnafterthesparkplugseatsto

compressthewasher.

Spark Plug

Figure16

Electrode

.02-.03 in.

{0.60-0.80 ram)

Figure17

become hotandcan inc.

LUBRICATION

Gear Shaft

Thegear(hex)shaftshouldbe lubricatedatleastoncea seasonor

afterevery25 hoursofoperation.

1. Topreventspillage,removeall fuelfromtank byrunningengine

untilitstops.

2. Carefullypivotthesnowthrowerupandforwardsothat itrestson

theaugerhousing.

3. Removethe lowerframecoverfromtheundersideofthesnow

throwerbyremovingtheself-tappingscrewswhichsecureit.

4. Applya lightcoatingofengineoil (or3-in-1oil) tothehexshaft.

SeeFigure18.

NOTE:Whenlubricatingthehexshaft,be carefulnottogetanyoilon

thealuminumdriveplateor rubberfrictionwheel.Doingsowillhinder

thesnowthrower'sdrivesystem.Wipeoff anyexcessor spilledoil.

Wheels

Atleastoncea season,removebothwheels.Cleanandcoattheaxles

witha multipurposeautomotivegreasebeforereinstallingwheels.

Chute Directional Control

Oncea season,lubricatetheeyeboltbushingand thespiralwith3-in-1

oil.

Auger Shaft

Atleastoncea season,removetheshearpinson augershaft.Spray

lubricantinsideshaft,andaroundthespacersandflangebearings

foundateitherendoftheshaft.SeeFigure19.

Figure18

SHAVE PLATE AND SKID SHOES

Theshaveplateand skidshoesonthebottomofthesnowthrowerare

subjecttowear.Theyshouldbecheckedperiodicallyandreplaced

whennecessary.

NOTE:Theskidshoeson thismachinehavetwowearedges.When

onesidewearsout,theycanbe rotated1800to usetheotheredge.

Toremoveskidshoes:

1. Removethetwocarriagebolts,washers,andhexflangenutsthat

secureeachskidshoetothesnowthrower.

2. Reassemblenewskidshoeswiththefourcarriagebolts(twoon

eachside),washers,andhexflangenuts.RefertoFigure20.

Toremoveshaveplate:

1. Removethecarriageboltsand hexnutswhichattachit tothe

snowthrowerhousing.

2. Reassemblenewshaveplate,makingsureheadsofcarriage

boltsaretotheinsideofhousing.Tightensecurely.SeeFigure

20.

Figure19

NOTE:Augers not shown for clarity.

Figure20

ADJUSTMENTS

Shift Cable

If thefull rangeofspeeds(forwardandreverse)cannotbe achieved,

refertothefiguretotherightandadjusttheshiftcableasfollows:

1. Placetheshiftleverin thefastest forwardspeedposition(F6).

2. Loosenthehex nuton theshiftcableindexbracket.SeeFigure

21.

3. Pivotthebracketdownwardtotakeupslackinthecable.

4. Retightenthehexnut.

Drive Control

Whenthedrivecontrolisreleasedandin thedisengaged"up"position,

thecableshouldhaveverylittle slack.It shouldNOTbetight.Also,

ifthereisexcessiveslackin thedrivecableor iftheunitexperiences

intermittentdrivewhileusing,thecablemayneedtobeadjusted.

Checktheadjustmentofthedrivecontrolasfollows:

1. Withthedrivecontrolreleased,pushthesnowthrowergently

forward.Theunitshouldrollfreely.

2. Engagethedrivecontrolandgentlyattempttopushthesnow

throwerforward.Thewheelsshouldnotturn.Theunitshouldnot

rollfreely.

3. Withthedrivecontrolreleased,movetheshiftleverbackand

forthbetweenthe R2positionandtheF6positionseveraltimes.

Thereshouldbeno resistancein theshiftlever.

4. If anyoftheabovetestsfailed,thedrivecableisin needof

adjustment.Proceedasfollows:

a. Shutoff theengineas instructedintheOperationsection.

b. Loosenthelowerhexboltonthedrivecablebracket.See

Figure22.

c. Positionthebracketupwardtoprovidemoreslack(or

downwardto increasecabletension).

d. Retightenthelowerhexbolt.

Figure21

Chute

If thechutefailstoremainstationaryduringoperation,thepreiloadd

thechutecanbeadjustedbytighteningthehexnutfoundon thefront

ofthechutecontrolhead.

1. Toincreasethepreload,tightenthehexnutclockwisein1Aturn

intervals.SeeFigure23.

2. If thechutedirectionalcontrolisdifficulttocrank,decreasethe

preloadbylooseningthehexnutcounterclockwisein 1Aturn

intervals.

Figure22

Figure23

Auger Control f "_

RefertotheAssemblysectionforinstructionsonadjustingtheauger

controlcable.

Skid Shoes

RefertotheAssemblysectionforinstructionsonadjustingtheskid

shoes.

BELT REPLACEMENT

Auger Belt

Toremoveandreplaceyoursnowthrower'saugerbelt,proceedas

follows:

1. Topreventspillage,removeall fuelfromtank byrunningengine

untilitstops.

2. Removethe plasticbeltcoveronthefrontoftheenginebyremov-

ingthetwoself-tappingscrews.SeeFigure24.

3. Rolltheaugerbeltoff theenginepulley.See Figure25.

4. Carefullypivotthesnowthrowerupandforwardsothat itrestson

theaugerhousing.

5. Removetheframecoverfromtheundersideofthesnowthrower

byremovingfourself-tappingscrewswhichsecureit.SeeFigure

26.

Figure24

Figure 25

Figure26

Page is loading ...

Craftsman 247.88173 Owner's manual

Brand: Craftsman

Model: 247.88173

Category: Snow throwers

Type: Owner's manual

This manual is also suitable for

Download PDF

report

in other languages

español: Craftsman 247.88173 El manual del propietario

Craftsman 247.88173 Owner's manual

This manual is also suitable for

Craftsman 247.88173 Owner's manual

in other languages

Related papers

Other documents