Commell LE-37G User manual

LE-37G

3.5 inch Motherboard

User’s Manual

Edition 2.0

2018/02/07

LE-37G User’s Manual

-1-

Copyright

The information in this document is subject to change without prior notice to make

improvements to the products.

This document contains proprietary information and protected by copyright. No part of this

document may be reproduced, copied, or translated in any form or any means without prior

written permission of the manufacturer.

All trademarks and/or registered trademarks contains in this document are property of their

respective owners.

Disclaimer

The company shall not be liable for any incidental or consequential damages resulting from

the performance or use of this product.

The company does not issue a warranty of any kind, express or implied, including without

limitation implied warranties of merchantability or fitness for a particular purpose.

The company has the right to revise the manual or include changes in the specifications of

the product described within it at any time without notice and without obligation to notify any

person of such revision or changes.

Trademark

All trademarks are the property of their respective holders.

Any questions please visit our website at TUhttp://www.commell.com.twUT

LE-37G User’s Manual

-2-

Packing List:

Please check the package content before you starting using the board.

Optional:

Printed Matters:

Driver CD x 1 (Including User’s Manual)

1 x LE-37G 3.5 inch Motherboard

(Incl. Heat Spreader for LE-37GXIxx series)

(Incl. Cooler Fan for LE-37GXIxKxF series)

1 x SATA Cable

(OALSATA3-H10-L35 / 1040523)

1 x PS/2 Keyboard & Mouse cable

(OALPS2/KM / 1040131)

1 xDC Input Power Cable

(OALDC-B / 1040513)

1 x Audio cable

(OALPJ-HDUNB / 1040123)

1 x Dual COM cable

(OALES-BKU2NB / 1040090)

1 x COM Cable

(OALES-BKU1NB / 1040086)

1 x SATA Power Cable

(OALSATA15-2PJ / 1040613)

1 xUSB2.0 cable

(OALUSBA-3 / 1040173)

+

-

1 x Onboard DVI-D cable for CN_DVI

(BADPDVI_A & OALDVI-DF13 /

4120008011 & 1040483)

LE-37G User’s Manual

-3-

Index

Chapter 1 <Introduction>............................................................... 4

1.1 <Product Overview> ............................................................ 4

1.2 <Product Specification> ...................................................... 5

1.3 <Mechanical Drawing> ........................................................ 6

1.4 <Block Diagram> ................................................................. 9

Chapter 2 <Hardware setup> ....................................................... 10

2.1 <Connector Location and Reference> .............................. 10

2.1.1 <Internal connectors list> ........................................ 11

2.1.2 <External connectors list> ....................................... 11

2.2 <Jumper Location and Reference> ................................... 12

2.2.1 <Jumper list> .......................................................... 12

2.2.2 <Clear CMOS and Power on type selection> .......... 12

2.3 <Installing the Memory> .................................................... 13

2.4 <I/O interface> .................................................................. 14

2.4.1 <Serial ATA interface> ............................................. 14

2.4.2 <Ethernet interface>................................................ 14

2.4.3 <Display interface> ................................................. 15

2.4.4 <Serial Port interface> ............................................ 17

2.4.5 <USB interface> ...................................................... 19

2.4.6 <Audio interface> .................................................... 20

2.4.7 <Expansion slot>..................................................... 20

2.4.8 <Front panel switch and indicator> ......................... 21

2.4.9 <GPIO ,SMBUS and Other Interface> .................... 22

2.5 <Power supply> ................................................................ 24

2.5.1 <Power input> ......................................................... 24

2.5.2 <Power output> ....................................................... 25

Appendix A <Flash BIOS> ........................................................... 26

Appendix B <Win7 Installation Notes> ....................................... 27

Appendix C <LCD Panel Type select> ........................................ 28

Appendix D <Programmable GPIO > .......................................... 29

Appendix E <Programmable Watch Dog Timer> ....................... 30

Appendix F <SATA RAID function setting> ................................ 31

Contact information ........................................................................ 32

LE-37G User’s Manual

-4-

Chapter 1 <Introduction>

1.1 <Product Overview>

LE-37G is 3.5 inch Motherboard which supports 6

th

/ 7

th

Generation Intel® Core™ U-series

i7, i5, i3, Celeron Mobile Processor with Sunrise Point PCH-LP, integrated HD Graphics,

DDR4 memory, Realtek High Definition Audio, Intel Gigabit LAN, Serial ATA3 with AHCI

function for a system.

Intel Skylake-U/ Kabylake-U Processor with Sunrise Point PCH-LP

The 6

th

/ 7

th

Generation Intel® Core™ U-series processor family is the next generation,

multi-core mobile processor built on 14 nanometer process with MCP technology.

The Skylake-U/Kabylake-U have a lower TDP, it provides new HD Graphics support triple

display at the same time, maximum supported is up to 16GB of DDR4, better performance,

flexibility and more enhanced security that is suitable for a variety of intelligent systems the

ideal choice.

All in One multimedia solution

The board provides high performance onboard graphics, 24-bit dual channel LVDS interface,

DisplayPort, HDMI, and High Definition Audio, to meet the very requirement of the

multimedia application.

Flexible Expansion Interface

The board provides two MiniPCIe and support mSATA, SIM.

Kaby Lake only support Windows10 64bit

Intel only support Windows 10 64bit. It may lose some drivers if you use other Windows

version.

LE-37G User’s Manual

-5-

1.2 <Product Specification>

System

Processor

Intel® 6

th

/ 7

th

Gen Core™ U-series Processor,

FCBGA1356 package

Chipset

Sunrise Point-LP

Memory

1 x DDR4 SO-DIMM 1866/2133 MHz up to 16GB

Support Non-ECC memory

Watchdog Timer

Generates a system reset with internal timer for 1min/s ~ 255min/s

Real Time Clock

Chipset integrated RTC with onboard lithium battery

Expansion

2 x MiniPCIe (Card2 support mSATA) and Card2 half-size choosable,

1 x SIM slot

Graphics

Chipset

Intel® Gen 9 integrated HD Graphics

Display Interface

1 x HDMI, 1 x LVDS, 1 x DisplayPort/VGA/DVI-D (optional for one, Note)

LAN

Chip

1 x Intel® I210-AT Gigabit LAN

1 x Intel® I219-LM Gigabit PHY LAN (Support iAMT11.0)

I/O

Serial ATA

2 x SATA3 support RAID 0, 1

Audio

Realtek ALC262 HD Audio

Digital I/O

Programmable 8-bit GPIO with 12 pin-header

Internal I/O

2 x SATA3, 1 x RS232/422/485, 4 x RS232, 1 x PS/2, 4 x USB2.0,

1 x LVDS, 1 x LCD inverter, 1 x LPC, 1 x SMBUS, 1 x DIO, 1 x Audio,

1 x DC Out, 1 x VGA (optional) , 1 x DVI-D (optional)

Rear I/O

1 x RS232, 1 x HDMI, 1 x DisplayPort (optional), 4 x USB3.0, 2 x LAN

Mechanical & Environmental

Power Requirement

DC input 9~30V

Size

146mm x 101mm (L x W)

Temperature

Operating within 0°C~60°C (32°F~140°F)

Storage within -20°C~80°C (-4°F~176°F)

Relative Humidity

10%~90%, non-condensing

Note 1: VGA requires LE-37GXIT series combined with “ADP-3355” module for DP convert to VGA.

2: DVI function – Remove DP, add DVI-D cable & module (BADPDVI_A & OALDVI-DF13)

LE-37G User’s Manual

-6-

1.3 <Mechanical Drawing>

Positive

LE-37G User’s Manual

-7-

Back

LE-37G User’s Manual

-8-

I/O

LE-37GXIP

LE-37GXIT

LE-37G User’s Manual

-9-

1.4 <Block Diagram>

CPU

6

th

/7

th

Gen

Processor

PCH-LP

DDR4

SO-DIMM

1 x DisplayPort

PTN3460

1 x LVDS

SIO

NCT6106D

DDI3

Channel A

eDP1

2 x SATA3

SATA3

4 x USB3.0

4 x USB2.0

USB3.0

USB2.0

SPI Flash

SPI

PCIe x1

I219-LM

HDA

HD Audio

PCIe x1

SATA3

LPC

1 x LPC

ALC262

5 x RS232

1 x SMBUS

1 x PS/2

I210-AT

PCIe x1

MiniCard1

PCIe x1

MiniCard2

1 x RS232/422/485

1 x DIO

SMBUS

GPIO

DDI2

Cable

ADP3355

1 x VGA

1 x HDMI

1 x DVI-D

Cable

LE-37G User’s Manual

-10-

Chapter 2 <Hardware setup>

2.1 <Connector Location and Reference>

CN_LVDS

MINI_CARD1

CN_LPC

CN_AUDIO

DC_IN

CN_USB1

JFRNT

SATA3-2

CN_COM5/6

CN_INV

DC_OUT

CPUFAN

SMBUS

MINI_CARD2

CN_COM3/4

CN_COM2

CN_DIO

SO-DIMM

CN_PS2

SATA3-1

CN_USB2

COM1

DisplayPort

HDMI

USB2

SIMM

USB1

LAN2

LAN1

SYSFAN

CN_DVI

CN_DP

LE-37G User’s Manual

-11-

2.1.1 <Internal connectors list>

Connector

Function

SO-DIMM

260-pin DDR4 SO-DIMM slot

SATA3-1/2

10-pin Serial ATA3 connector

CN_AUDIO

5 x 2-pin audio pin header

CN_LPC

6 x 2-pin LPC pin header

CN_DIO

6 x 2-pin General Purpose In/Out pin header

CN_LVDS

20 x 2-pin LVDS connector

CN_DVI

10 x 2-pin DVI-D connector for optional

CN_DP

11 x 1-pin DP to VGA module connector for optional

CN_INV

5-pin LCD inverter connector

CN_COM2

10-pin RS232/422/485 connector

CN_COM3/4

20-pin RS232 connector

CN_COM5/6

20-pin RS232 connector

CN_USB1/2

5 x 2-pin USB2.0 pin header

CN_PS2

5 x 2-pin PS/2 pin header

SMBUS

5-pin SMBus connector

SIMM

6-pin SIM card slot

CPUFAN

4-pin CPU fan connector

SYSFAN

4-pin system fan connector

JFRNT

5 x 2-pin front panel switch/indicator pin header

MINI_CARD1/2

52-pin MiniPCIe card slot

DC_OUT

4-pin SATA Power connector

DC_IN

2-pin power input Terminal Block

2.1.2 <External connectors list>

Connector

Function

COM1

DB9 connector

HDMI-DP

DisplayPort and HDMI dual layer connector

USB1

2 x USB3.0 connector

USB2

2 x USB3.0 connector

LAN1

RJ45 connector

LAN2

RJ45 connector

LE-37G User’s Manual

-12-

2.2 <Jumper Location and Reference>

2.2.1 <Jumper list>

Jumper

Function

JAT

Power mode select

JRTC

CMOS Normal/Clear Setting

JVLCD

Panel Voltage Setting

JMSATA

MiniCard2 mSATA Setting

JCSEL1/2

CN_COM2 RS232/422/485 select

JP1/2

COM1 and CN_COM2 9-pin setting

2.2.2 <Clear CMOS and Power on type selection>

JRTC: Clear CMOS data jumper

Jumper settings

Function

1-2

Clear CMOS

2-3

Normal (Default)

JAT: AT/ATX mode select jumper

Jumper settings

Function

1-2

AT mode

2-3

ATX mode (Default)

JRTC

JVLCD

JAT

JMSATA

JP2

JP1

JCSEL1

JCSEL2

LE-37G User’s Manual

-13-

2.3 <Installing the Memory>

In the process, the board must be powered off.

1. Put the memory tilt into the slot. Note the Memory notch key aligned slot key.

2. Then press down till lock into the mounting notch.

3. To remove the memory, push outward on both sides of the latch.

Key

Mounting notch

Press down

Latch

LE-37G User’s Manual

-14-

2.4 <I/O interface>

2.4.1 <Serial ATA interface>

Support RAID0 and 1.

2.4.2 <Ethernet interface>

The board provides I210-AT and I219-LM Gigabit Ethernet which supports WOL

on rear I/O.

It supports Intel® AMT 11.0 feature on I219-LM.

(Note that the CPU must support vPro technology, ex: i5-6300U)

I219-LM

SATA3-1

SATA3-2

I210-AT

LE-37G User’s Manual

-15-

2.4.3 <Display interface>

Based on the 6

th

/ 7

th

Gen CPU with built-in HD Graphics, the DisplayPort

resolution up to 3840x2160 @ 60Hz or 4096x2304 @ 60Hz, the HDMI up to

4096x2304 @ 24Hz and LVDS up to 1920x1200 @ 60Hz support 18/24-bit color

depth and dual channel. About select LCD Panel Type in BIOS, please refer

Appendix C.

The built-in HD Graphics support triple display function with clone mode and

extended mode.

Note: 1. The HDMI-DP dual layer connector can be changed HDMI & CN_DP,

CN_DP function for use “ADP-3355” VGA module.

(The VGA resolution is up to 2048x1536 @50Hz.)

2. ADP-3355 no need install extra driver. Here is Setup manual Link.

3. CN_DVI for DVI function , CN_DP and CN_DVI select one for use.

CN_DVI: DVI 20-pin connector

Signal

1

5V

2

NC

3

HPD

4

GND

5

TMDS_TX0-

6

TMDS_TX0+

7

GND

8

TMDS_TX1-

9

TMDS_TX1+

10

GND

11

TMDS_TX2-

12

TMDS_TX2+

13

GND

14

TMDS_CLK-

15

TMDS_CLK+

16

GND

CN_DVI

CN_LVDS

1

40

JVLCD

2

39

1

19

2

20

5

1

HDMI-DP

6

2

optional

CN_DP

CN_INV

1

5

optional

LE-37G User’s Manual

-16-

17

SDA

18

SCL

19

NC

20

NC

CN_LVDS: LVDS 40-pin connector (Model: HIROSE DF13-40DP-1.25V compatible)

Signal

2

Set by JVLCD

1

Set by JVLCD

4

Detect (Active low)

3

GND

6

A_LVDS_0-

5

B_LVDS_0-

8

A_LVDS_0+

7

B_LVDS_0+

10

GND

9

GND

12

A_LVDS_1-

11

B_LVDS_1-

14

A_LVDS_1+

13

B_LVDS_1+

16

GND

15

GND

18

A_LVDS_2-

17

B_LVDS_2-

20

A_LVDS_2+

19

B_LVDS_2+

22

GND

21

GND

24

A_LVDS_CLK-

23

B_LVDS_3-

26

A_LVDS_CLK+

25

B_LVDS_3+

28

GND

27

GND

30

A_LVDS_3-

29

B_LVDS_CLK-

32

A_LVDS_3+

31

B_LVDS_CLK+

34

GND

33

GND

36

LVDS_DDCSCL

35

NC

38

LVDS_DDCSDA

37

NC

40

NC

39

NC

Note: Pin4 only need to be connected to GND

CN_INV: LVDS 5-pin Backlight power connector

Signal

1

12V

2

Backlight Control

3

GND

4

GND

5

Enable Backlight

LE-37G User’s Manual

-17-

JVLCD: LVDS panel power select jumper

Jumper settings

Function

1-2

3.3V (Default)

3-4

5V

5-6

12V

Effective patterns of connection: 1-2 / 3-4 / 5-6

Other may cause damage

2.4.4 <Serial Port interface>

COM1: RS232 DB9 connector

Signal

1

DCD

2

RXD

3

TXD

4

DTR

5

GND

6

DSR

7

RTS

8

CTS

9

Set by JP1

10

Key

CN_COM2

1

2

9

10

CN_COM3/4

CN_COM5/6

1

2

19

20

1

2

20

19

2

1

6

5

JP1

JP2

2

6

1

5

JCSEL1

1

2

11

12

JCSEL2

1

2

5

6

COM1

LE-37G User’s Manual

-18-

CN_COM2: RS232/422/485 10-pin header (Pitch 1.27mm x 2.54mm)

Signal

1

DCD/ 422TX-/ 485-

2

RXD/ 422TX+/ 485+

3

TXD/ 422RX+

4

DTR/ 422RX-

5

GND

6

DSR

7

RTS

8

CTS

9

Set by JP2

10

Key

Note: Use JCSEL1 and JCSEL2 to select communication mode

COM3/4,5/6: RS232 20-pin header (Pitch 1.27mm x 2.54mm)

Signal

1

DCD1

2

RXD1

3

TXD1

4

DTR1

5

GND

6

DSR1

7

RTS1

8

CTS1

9

RI1

10

NC

11

DCD2

12

RXD2

13

TXD2

14

DTR2

15

GND

16

DSR2

17

RTS2

18

CTS2

19

RI2

20

Key

JP1, JP2: COM1, COM2 pin-9 setting

Jumper settings

Function

1-2

5V

3-4

12V

5-6

RI (Default)

Effective patterns of connection: 1-2 / 3-4 / 5-6

Other may cause damage

LE-37G User’s Manual

-19-

JCSEL1, JCSEL2: For configure COM2 communication mode

Function

JCSEL1

JCSEL2

RS232

RS485

RS422

2.4.5 <USB interface>

USB1 & 2 are USB3.0 interface.

CN_USB1/2: Front panel USB2.0 10-pin header (Pitch 2.54mm)

Signal

1

5VSB

2

5VSB

3

DATA0-

4

DATA1-

5

DATA0+

6

DATA1+

7

GND

8

GND

9

GND

10

Key

CN_USB2

1

10

2

9

USB1

1

12

1

12

1

12

6

1

5

1

5

1

2

11

2

11

2

11

2

5

6

CN_USB1

1

2

9

10

USB2

Page is loading ...

Commell LE-37G User manual

Commell LE-37G User manual

Related papers

Other documents