2. Computers & electronics
  3. Telecom & navigation
  4. Mobile headsets
  5. Denver
  6. BTH-204BLACK
BTH-204BLACK

Denver BTH-204BLACK, BTH-204PINK, BTH-204WHITE User manual

  • Hello! I am an AI chatbot trained to assist you with the Denver BTH-204BLACK User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Instruction manual
BTH-204
1
www.facebook.dk/denver-electronics
Overview
:
Feature:
Bluetooth version: V4.1+EDR
Supported profiles: HFP, A2DP, AVRCP
Support 3.5 mm stereo audio input
Operation Range: 10 meters
Play time: up to 10 hours
Talk time: 10 hours
Charging voltage: DC5V/500mA
Charging port: Micro USB
Charging time: 2.5 hours
Built-in microphone
2
Operation specification:
1.Charge headphones. Please connect headphones to PC with included USB cable, or
to an external USB charger (USB charger not included). Red indicator is on while
charging. Fully charge may take up to 2.5 hours. Disconnect when charging is complete.
2.ON/OFF:
ON: turn the switch key to ON position, you will hear a Beep sound & blue and red light
will flash. If the headphones are already paired with other unit it will try to pair again,
otherwise you have to pair it.
OFF: turn the switch key to OFF position to turn headphones off. Note: headphones will
automatically turn off, if you pairing within 10 minutes.
3.Connecting to Bluetooth enabled device:
A.
Bluetooth pairing for the first time
1）
Turn on headphones: turn the switch key to ON position. The headphone enters into
pairing mode when blue and red light indicator flashes.
2）
Turn on the device you want to pair with (such as MP3,mobile phone, smart phone or
tablet PC with Bluetooth function)
3)
Choose and confirm “BTH-204” from your Bluetooth device menu. If asked for
password, please input 0000.
4)
Bluetooth connection is successful when blue indicator flashes slowly.
B.
Pair with other Bluetooth enabled device
1)
If you need to pair your headphones with a new unit, make sure to unpair with the
existing device, and then make a new pair like just described.
C.Pair with the second phone:
Make sure headphone are ON and successfully connected with first phone, and then
double click “prev” button to enter pairing mode & repeat above 3-5 steps to connect with
the second phone.
3
Note: you may need to connect certain device separately after pairing. The blue
indicator of headphone will flash slowly when it is connected to your device
successfully. The headphone will automatically search and connect to previously
connected Bluetooth device after restart. Multi-devices pairing is allowed for
headphones, but the actual use is only available for one device at a time.
4. Adjust volume
:
Connect headphone to Bluetooth enabled device successfully:
> + :
long press to increase volume
| < ：
long press to reduce volume
Note: headphone alarm will sound when volume reaches maximum or minimum. You can
also adjust volume on A2DP paired device(if the connected device support this profile).
5. Mobile phones calls:
Connect headphone to smartphone
1)
Answer incoming call: press multifunction key shortly(not more than 1 second)
2）
Reject call: hold the multifunction key for 3 seconds
3）
End call: press multifunction key shortly(not more than 1 second)
4)
Press multifunction key twice rapidly to redial (if mobile devices support
headphone redial function)
5)
Long press multifunction key can switch the call to mobile phone. While, press the
multifunction key twice during calls will turn on mute. The headphone will automatically
broadcast caller ID for an incoming call.
6. Listen to music:
Please connect headphone to A2DP supported compatible music player. The music
playback function depends on your player. Your music player will pause, if you answer or
dial calls when listening to music, until call ends. Press multifunction key shortly (not
more than 1 second) to pause or resume play. For next song, please press |< once,
previous song, press >+ twice.
7. AUX play:
Make sure the headphones is turned off. Connect one end of 3.5mm audio cable to
headphones, and the other end to the unit you want to play music from.
4
Indicator:
Blue light flash slowly Bluetooth connected successfully
Blue and red light flashing Bluetooth: headphone is on, waiting for connection.
Red light flashes with alarm sound Power is less than 5% (please charge)
Red light and prompt charge Charging
Stable blue light Charge complete
No light Headphone is off
ALL RIGHTS RESERVED COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment and included batteries contains materials, components
and substances that can be hazardous to your health and environment, if the waste material
(discarded electric and electronic equipment and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out trash can
symbol, seen below. This symbol signifies that electric and electronic equipment and
batteries should not be disposed with other household waste, but should be disposed of
separately.
As the end user it is important that you submit your used batteries to the appropriate and
designated facility. In this manner you make sure that the batteries are recycled in
accordance with legislature and will not harm the environment.
All cities have established collection points, where electric and electronic equipment and
5
batteries can either be submitted free of charge at recycling stations and other collection
sites, or be collected from the households. Additional information is available at the
technical department of your city.
Hereby, Inter Sales A/S, declares that this product DENVER BTH-204 is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of
the Declaration of conformity may be obtained at:
Inter Sales A/S, Stavneagervej 22, DK-8250 Egaa, Denmark.
Importer:
DENVER ELECTRONICS A/S
Stavneagervej 22
DK-8250 Egaa
Dänemark
www.facebook.com/denverelectronics
6
/