Page is loading ...
Quick Setup Guide
(For India Only)
This product is RoHS compliant.
For more information on safe disposal and recycling visit our
website www.samsung.com/in or contact our Helpline numbers -
18002668282, 180030008282.
|
Control Panel
The functions available may vary depending on the product model.
The color and shape of parts may differ from what is shown.
Specications are subject to change without notice to improve quality.
1
JOG Button
Multi directional button that helps navigate.
The JOG button is located on the rear left side of the product. The button can be used to move up, down, left or right, or as Enter.
2
This LED is power status indicator and works as
- Power on (Power button): Off / Power saving mode: Blinking / Power Off (Power button): On
3
Function Key
Guide Press the JOG button when the screen is turned on. The Function Key Guide will appear.
To access the onscreen menu when the guide is displayed, press the corresponding direction button again.
4
Select [ ] by moving the JOG button in the function key guide screen.
The OSD (On Screen Display) of your Monitor’s feature appears.
4
Select [ ] to adjust the brightness by moving the JOG button in the Function Key Guide screen.
6
Select [ ] by moving the JOG button in the function key guide screen.
Press to enable or disable Eye Saver Mode which is also Low Blue Light Mode.
7
Select [ ] to turn the Monitor off by moving the JOG button in the function key guide screen.
RGB IN
DC14V
LEFT
UP
RIGHT
PRESS(ENTER)
DOWN
Return
Power LED
JOG Button
Function Key Guide
|
Checking the Components
• Contact the dealer from whom you purchased the
product if any item is missing.
• The appearance of the components may differ from
the images shown.
Quick Setup Guide Warranty card
(Not available in some
locations)
Regulatory guide User manual (optional)
Power adapter
(Integrated) (optional)
Power adapter
(Detachable) (optional)
Power cable
(Only provided with
the detachable power
adapter.)
D-SUB cable (optional)
Stand base Stand neck
|
Attaching the Stand
• Before assembling the product, place the product
down on a at and stable surface so that the screen is
facing downwards.
• The exterior may differ depending on the product.
|
Removing the Stand
• The exterior may differ depending on the product.
|
Adjusting the Product Tilt
• The exterior may differ depending on the product.
|
Installing a Wall-mount
Kit or Desktop Stand
• Power the product off and remove the power cable
from the power socket.
Attach the wall-mount kit or desktop stand here
Bracket (sold separately)
Align the grooves and tightly fasten the screws on the
bracket on the product with the corresponding parts on
the wall-mount kit or desktop stand you want to attach.
1 2
3 4
-2.0° (±2.0°) ~ 22.0° (±2.0°)
RGB IN
DC14V
1
2
3
4
5
RGB IN
DC14V
A
B
RGB IN
DC14V
2
4
1
3
2002460454T
|
Connecting and Using a PC
1
Connection Using the D-SUB Cable (Analog Type)
2
Connecting the Power
- Power connection using integrated power adapter
- Power connection using detachable power adapter
|
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
INDIA
1800 3000 8282 - Toll Free
1800 266 8282 - Toll Free
http://www.samsung.com/in/support
RGB IN
DC 14V
DC 14V
|
Specifications
Model Name S19F350HN*
Panel
Size 47.0 cm
Display area 409.8 mm (H) x 230.4 mm (V)
Pixel Pitch 0.3 mm (H) x 0.3 mm (V)
Resolution
Optimum
Resolution
1366 x 768 @ 60 Hz
Maximum
Resolution
1366 x 768 @ 60 Hz
VESA Mounting Interface
75.0 mm x 75.0 mm
(For use with Specialty(Arm) Mounting hardware.)
Power Supply
AC 100 - 240 V – (+/- 10 %), 50/60 Hz ± 3 Hz
Refer to the label at the back of the product as the standard voltage can vary in
different countries.
Environmental
considerations
Operating
Temperature: 32°F – 104°F (0°C – 40°C)
Humidity: 20 % – 80 %, non-condensing
Storage
Temperature: -4°F – 140°F (-20°C – 60°C)
Humidity: 10 % – 90 %, non-condensing
|
Troubleshooting Guide
Issues Solutions
The screen keeps switching on and off.
Check the cable connection between the product and PC, and ensure the
connectors are locked.
The screen will not switch on. Check that the power cable is connected properly.
The images on the screen look distorted. Check the cable connection to the product.
There is no image on the screen and the power
LED blinks every 0.5 to 1 second.
The product is operating in power saving mode.
Press any key on the keyboard or move the mouse to return to normal
operating mode.
A beeping sound is heard when my PC is
booting.
If a beeping sound is heard when your PC is booting, have your PC serviced.
/