Roland F-1 Owner's manual

Brand: Roland

Model: F-1

Type: Owner's manual

F-1 Ver. 2.1 - Newly Added Functions

You can set Time Zone and Summer Time (Daylight

Saving Time : DST) in this version of F-1.

In order to display the captured time of the clips correctly

on computers, set Time Zone to F-1’s internal clock.

Select the Time Zone menu

Press [MENU] button and select [Time Zone].

fig.timezone-menu.eps

Select Time Zone you are using F-1

Use cursor to select the Time Zone you are using F-1

currently. Press [ENTER] to set.

fig.timezone-select.eps

Select the nearest location from the following list or select

time difference from GMT (Greenwich Mean Time).

US (PACIFIC) US (MOUNTAIN)

US (CENTRAL) US (EASTERN)

EU (LONDON) EU (BERLIN)

EU (HELSINKI) RUSSIA (MOSCOW)

INDIA (DELHI) CHINA (BEIJING)

JAPAN (TOKYO)

GMT-12 GMT-11 GMT-10 GMT-9

GMT-8 GMT-7 GMT-6 GMT-5

GMT-4 GMT-3 GMT-2 GMT-1

GMT

GMT+1 GMT+2 GMT+3 GMT+4

GMT+5 GMT+6 GMT+7 GMT+8

GMT+9 GMT+10 GMT+11 GMT+12

In order to display the captured time of the clips correctly

on computers, set Summer Time to F-1’s internal clock.

Select the Summer Time menu

Press [MENU] button and select [Set Summer Time].

fig.summertime-menu.eps

Select Use or Not Use

Use cursor to select [ON](use Summer Time) or [OFF](not

use Summer Time) depending on the season and location

you are using your F-1. Press [ENTER] to set.

fig.use-summertime.eps

When you select [Loop REC] as the recording mode, the

screen below is displayed.

fig.loop-REC-screen.eps

Press [DISPLAY] button to toggle the display between

recording time/timecode/audio level.

Time Setup

Setting the Time Zone

Setting Summer Time

(Daylight Saving Time : DST)

Display Function - Loop Recording

1PS

Roland F-1 Owner's manual

Roland F-1 Owner's manual

Other documents