Dwyer Series RRT3 is a high-precision Remote Reading Thermometer with Switch designed for accurate temperature measurement and control in various applications. It features a 3-1/4" dual scale dial for easy temperature monitoring and a built-in SPDT relay for switching operations.
- Wide Temperature Range: Measures temperatures from -4 to 158°F (-20 to 70°C) with ±3% FS accuracy.
- Adjustable Set Point: Allows you to set the desired temperature threshold for switching operations.
- SPDT Relay: Provides switching capability for controlling external devices or alarms based on temperature changes.
Dwyer Series RRT3 is a high-precision Remote Reading Thermometer with Switch designed for accurate temperature measurement and control in various applications. It features a 3-1/4" dual scale dial for easy temperature monitoring and a built-in SPDT relay for switching operations.
- Wide Temperature Range: Measures temperatures from -4 to 158°F (-20 to 70°C) with ±3% FS accuracy.
- Adjustable Set Point: Allows you to set the desired temperature threshold for switching operations.
- SPDT Relay: Provides switching capability for controlling external devices or alarms based on temperature changes.
Series RRT3 Remote Reading Thermometer with Switch
Specications - Installation and Operating Instructions
Bulletin T-RRT3
The Series RRT3 Remote Reading Thermometer with Switch combines an easy to
read 3-1/4˝ dual scale dial thermometer and a SPDT relay. Color coordinated pointers
display the current process temperature and set point. In order to change the set
point, a front adjustment knob controls the red set point pointer. The design of the
internal mechanical switch movement prevents the set point pointer from sticking
to the process indicating pointer. A 10.5 ft (3.2 m) stainless steel ex hose capillary
prevents kinking and leaking of the measuring uid when bending the capillary. For
quick installation, electrical connections can be made to male quick connects or to
the nger-safe screw terminals. Thermometer includes a u-clamp mounting bracket
for panel mounting.
OPERATING INSTRUCTIONS
SPECIFICATIONS
Wetted Materials: 304 SS.
Accuracy: ±3% FS.
Housing Material: 304 SS.
Temperature Limit: -4 to 158°F (-20 to 70°C).
Switch Type: SPDT, 3 A @ 250 VAC, .2 A @ 250 VDC.
Electrical Connections: Normally open (NO), normally closed (NC), and common
(COM).
Process Connection: 1/2˝ (12.7 mm) male NPT.
Dial Size: 3-1/2˝ (90 mm).
Capillary Length: 10.5´ (3.2 m).
Bulb Length: 3-1/8˝ (79.24 mm).
Weight: 2 lb (900 g).
3-1/8
[79.24]
3-23/64
[85.51]
3-33/64
[89.50]
3-5/32
[80.00]
3-1/32
[77.00]
7/16
[11.00]
Key
1
2
3
4
5
6
7
8
9
10
11
12
Pointer
Scale plate
Glass disk
Cover
Case
Bracket
Terminal
Setting pointer
Setting knob
Capillary
Flexible tube
Thermobulb
2
1
3
8
9
4
5
10
6
7
11
12
®
DWYER INSTRUMENTS, INC.
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A.
Phone: 219/879-8000
Fax: 219/872-9057
www.dwyer-inst.com
e-mail: [email protected]
Printed in U.S.A. 5/18 FR# 443930-00 Rev. 2©Copyright 2018 Dwyer Instruments, Inc.
DWYER INSTRUMENTS, INC.
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A.
Phone: 219/879-8000
Fax: 219/872-9057
www.dwyer-inst.com
e-mail: [email protected]
Mechanical Installation
1. For mounting, select a clean, dry location, free from extreme temperatures.
2. Cut a 3-7/32˝ (82 mm) diameter hole in the panel for the thermometer.
3. Prior to inserting the thermometer into the panel, remove the mounting bracket.
4. Insert the thermometer into the panel cutout from the front.
5. Place the U-bracket on the back of the thermometer (make sure the screws are
aligned with the holes in the mounting bracket).
6. Secure the bracket into place by tightening the nuts until the bracket is tight against
the panel.
7. The probe should be mounted so the bulb is fully immersed in the media and where
the media temperature will be evenly distributed.
Electrical Connections
1. Connections for the switch are made by three connections. The quick connect
terminals are labeled N.O., N.C., and COM. N.O. is the normally open terminal,
COM is the common terminal, and N.C. is the normally closed terminal.
2. For NC (normally closed) operation, make switch connections using terminals
COM and N.C.
3. For NO (normally open) operation, make switch connections using terminals COM
and N.O.
Set Point Operation
The switch set point is fully adjustable across the entire range of the unit. The unit
is equipped with internal stops at the minimum and maximum values of a specied
range.
Adjust the set point by rotating the black knob on the front of the dial case to the
desired temperature setting.
MAINTENANCE/REPAIR
Upon nal installation of the Series RRT3, no routine maintenance is required. The
Series RRT3 is not eld serviceable and should be returned if repair is needed. Field
repair should not be attempted and may void warranty.
WARRANTY/RETURN
Refer to “Terms and Conditions of Sales” in our catalog and on our website. Contact
customer service to receive a Return Goods Authorization number before shipping the
product back for repair. Be sure to include a brief description of the problem plus any
additional application notes.
If panel thickness exceeds 13/64˝ (5 mm), the bracket must be
shortened accordingly.
NOTICE
Since temperature effects along the capillary are compensated
for, the capillary should not be located close to other temperature
sources. Take care in arranging the steel capillary to avoid sharp bends that might kink
internal capillary tube.
NOTICE
Do not exceed the specied electrical ratings shown on the unit.
Permanent damage, not covered by the warranty, will result.
CAUTION
NO
C : COMMON
NO : NORMAL OPEN
NC : NORMAL CLOSE
NC C
-
1
-
2
Dwyer Series RRT3 is a high-precision Remote Reading Thermometer with Switch designed for accurate temperature measurement and control in various applications. It features a 3-1/4" dual scale dial for easy temperature monitoring and a built-in SPDT relay for switching operations.
- Wide Temperature Range: Measures temperatures from -4 to 158°F (-20 to 70°C) with ±3% FS accuracy.
- Adjustable Set Point: Allows you to set the desired temperature threshold for switching operations.
- SPDT Relay: Provides switching capability for controlling external devices or alarms based on temperature changes.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Dwyer Series LCT316 User manual
-
-
-
-
-
-
-
-
-
