www.esab.com Assembly instruction
0463 478 001
Shoulder strap kit
0445 197 880
ES 300i, ET 300i
www.esab.com Assembly instruction
0463 478 001
1. Mount the pins to the shoulder strap.
2. Unscrew the four screws holding the top handle cover using a
TX20 screw driver.
3. Remove the cover.
4. While mounted on the shoulder strap, push down the pins in
the top handle sockets. Make sure they snap in properly.
5. Put back the top handle cover and tighten the four screws
2,5 Nm.
-
1
-
2
ESAB ET 300i Assembly Instruction
- Type
- Assembly Instruction
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI