Plug & Play ¦
When the TV is initially powered on, basic settings proceed automatically and subsequently.
If you want to reset this feature, press the MENU button to display menu.
You can set the Plug & Play by selecting Setup → Plug & Play.
On the screen, you can set as follows.
The each step may vary depending on the Antenna source.
✎
Plug & Play
Select the OSD Language.
E
Enter
Menu Language
: English
►
Step 1
Step 4
Step 3
Plug & Play
Select Country.
Previous
E
Enter
Country
: United Kingdom
►
Step 2
Plug & Play
Store Demo Home USE
Previous
L
Move
E
Enter
Step 7
Step 5 Step 6
Step 8
Plug & Play
HD Connection Guide
How to get the best performance from your new HDTV.
Step 1. Connect the HD Box to the TV using the HDMI or Component
cables.
HD box
TV rear view
1/2
Component Cable
Previous
Skip
r
Next Page
HDMI Cable
Enjoy your TV.
Power Input
VHF/UHF Antenna
Cable
ANT OUT
Select the usage mode.
Plug & Play
Serch
Previous
Skip
U
Move
E
Enter
Antenna Source
: Air
►
Channel Source
: Digital & Analogue
Plug & Play
Stop
E
Enter
Auto Store in progress.
Digital
2
TV:2 Radio:0 Data/Other: 0
Analogue 0
Channels 7
3%
Plug & Play
Set the Clock Mode.
Previous
Skip
E
Enter
Clock Mode
: Auto
►
OK
or
BN68-02681A_00Eng_UK QSG.indd 3 2010-03-27 �� 12:56:15