Your watch is also compatible with the Polar H10 heart rate
sensor with a chest strap. You can buy a heart rate sensor as
an accessory. Find a full list of sensors and accessories your
watch is compatible with at support.polar.com/en/VantageV.
APP STORE IS A SERVICE MARK OF APPLE INC.
ANDROID AND GOOGLE PLAY ARE TRADEMARKS OF GOOGLE INC.
IOS IS A TRADEMARK OR REGISTERED TRADEMARK OF CISCO IN THE U.S. AND OTHER
COUNTRIES AND IS USED UNDER LICENSE.
MANUFACTURED BY
POLAR ELECTRO OY
PROFESSORINTIE 5
FI-90440 KEMPELE
TEL +358 8 5202 100
WWW.POLAR.COM
Getting Started Guide
Learn more at support.polar.com/en/VantageV
English
Start training
VANTAGE V
/polarglobal
COMPATIBLE WITH
PRO MULTISPORT WATCH
Technical specification
BATTERY T YPE:
HEART RATE SENSOR:
1. Wear your watch and tighten the wristband.
2. Press BACK to enter the main menu, choose Start training, and
then browse to a sport prole.
3. Go outdoors and away from tall buildings and trees. Keep your
watch still with the display upwards to catch GPS satellite signals.
When the signal is found the GPS icon is displayed.
4. The watch has found your heart rate when your heart rate is shown.
5. When all signals are found, press OK to start training recording.
Heart rate training
PAUSE AND STOP TRAINING
Press BACK to pause your training session. To continue training, press
OK. To stop the session, press and hold BACK when paused until
Recording ended is displayed. You’ll get a summary of your training
session on your watch right after you’ve stopped training.
You can customize your watch with
your favorite sports and the information
you want to follow during your sessions
with Polar Sport proles in the Polar
Flow web service and app.
Polar Flow app and web service
VIEW YOUR TRAINING DATA AT A GLANCE
ON THE MOBILE APP
Get the Polar Flow app on the App Store or
Google Play. Sync your watch with the Flow
app after training and get an instant overview
and feedback on your training result and
performance. In the Flow app you can also
check how you’ve slept and how active you’ve
been during the day.
POLAR FLOW WEB SERVICE FOR MORE
DETAILED ANALYSIS
Sync your training data to the Flow web
service with your computer or via Flow
app. In the web service you can track your
achievements, get guidance and see a
detailed analysis of your training results,
activity and sleep.
320 mAh LI-POL BATTERY
INTERNAL OPTICAL
WATER RESISTA NCE:
The radio equipment operates 2.402 - 2.480 GHz ISM frequency band(s) and 2,8 mW
maximum power.
30 M (SUITABLE FOR SWIMMING)
BLACK MODEL: CORNING GORILLA 3 GLASS, SUS 316, NI-FREE
AUSTENITIC STAINLESS STEEL / X15 CRMNMON 17 11 3, CHN
LIMS 70A/B, SUS 316L, TPU, SUS 304, PMMA, SUS 630, PA12
CABLE: BRASS, PA66+PA6, PC, TPE, CARBON STEEL, NYLON
TAKE CARE OF YOUR VANTAGE V
Keep your watch clean by rinsing it under running water after each
training session. Before charging, please make sure there’s no
moisture, dust or dirt on the charging contacts of your watch and
cable. Gently wipe off any dirt or moisture. Do not charge the watch
when it’s wet.
The Polar Precision Prime optical heart rate sensor fusion technology uses a very
small, safe amount of electric current on the skin to measure the contact of the
device to your wrist to enhance accuracy.
Wrist-based heart rate measurement is convenient and easy. Tighten
the wristband for training, start a training session on your watch, and
you’re ready to go.
To get accurate heart rate readings during training, wear your watch
for a few minutes prior to starting the heart rate measurement in
order for your skin to adapt to the watch. Secure the wristband rmly
on top of your wrist, just behind the wrist bone. The sensor on the
back must be touching your skin.
When not measuring heart rate, loosen the wristband a bit for a more
comfortable t and to let your skin breathe.
ORANGE AND WHITE MODELS: CORNING GORILLA 3 GLASS, SUS
316, NI-FREE AUSTENITIC STAINLESS STEEL / X15 CRMNMON 17
11 3, CHN LIMS 70A/B, SUS 316L, SUS 304, PMMA, SUS 630, PA12
MATERIALS:
Your watch syncs your training data with the Flow mobile app
automatically if your phone is within the Bluetooth range and
the Flow app is running.
100%9 41 AMPolar
13.0km
Distance
1:45:23
Duration
Running
Tuesday, May 9, 2015, 12:47 AM
Training Summary
HR Pace Power
km/h
30
25
20
15
10
5
%
100
90
80
70
60
50
How do you feel?
Detete training
Expand all
Training Zones
Route
Session Feedback
High
1806
Muscle load
Low
420
Perceived load
Somewhat Hard
4/10
Your estimate (RPE)
179
Medium
Cardio load (TRIMP)
Training Load Pro
Wrist bone
17972131.00 ENG 07/2018 10011
S
e
t
t
i
n
g
s
O
r
t
h
o
s
t
a
t
i
c
t
e
s
t
S
t
a
r
t
t
r
a
i
n
i
n
g
Daily activity
63%
MON 20MON 20
MON 20MON 20
Get to know your Vantage V
How to get started
1. To wake up and charge your watch, plug it into a powered USB
port or a USB charger with the custom cable that came in the box.
The cable magnetically snaps into place, just make sure to align the
ledge on the cable with the slot on your watch (marked with red).
Please note that it may take a while for the charging animation to
appear on the display.
SET UP WITH A MOBILE DEVICE AND POLAR FLOW APP
Please note that you have to do the pairing in the Flow app and NOT in
your mobile device’s Bluetooth settings.
1. Make sure your mobile device is connected to the internet and
turn on Bluetooth®.
2. Download the Polar Flow app from the App Store or Google Play
on
your mobile device.
3. Open the Flow app on your mobile device.
4. The Flow app recognizes your Vantage V nearby and prompts
you to start pairing it. Accept the pairing request and enter the
Bluetooth pairing code shown on the watch display to Flow app.
5. Sign in with your Polar account or create a new one. We’ll walk you
through the sign-up and setup within the app.
When you’re done with the settings, tap Save and sync and your
settings are synced to your watch.
Options A and B: If there is a rmware update available for your
watch, we recommend you install it during the setup. It may take
up to 10 minutes to complete.
SET UP WITH A COMPUTER
1. Go to flow.polar.com/start and download and then install the
Polar FlowSync data transfer software to your computer.
2. Sign in with your Polar account or create a new one. We’ll walk
you through the sign-up and setup within the Polar Flow web
service.
A
B
SET UP FROM THE WATCH
Adjust the values with UP/DOWN and conrm each selection with
OK. If you want to return and change a setting at any point, press
BACK until you reach the setting you want to change.
When you do the setup from the watch, your watch is not yet
connected with Polar Flow. Firmware updates for your watch are
available only through Polar Flow. To make sure you get to enjoy
your watch and the unique Polar features at their best, it’s important
that you do the setup later in the Polar Flow web service or with the
Polar Flow mobile app by following the steps in option A or B.
C
LIGHT UP
DOWN
OK
BACK/
MENU
KEY BUTTON FUNCTIONS
• Press OK to conrm selections
• Browse the training views and menu with UP/DOWN, move through
selection lists, and adjust a chosen value.
• Return, pause and stop with BACK. In time view press BACK to enter
the menu, press and hold to start pairing and syncing.
• Press and hold LIGHT to lock buttons.
Key features
TRAINING LOAD PRO
Get a comprehensive view of how your training sessions strain
your body in different ways. Session-by-session and long-term
monitoring.
RECOVERY PRO*
Avoid overtraining and injuries and follow your recovery level on
a daily and longer-term basis. Training Load Pro together with
Recovery Pro provides a holistic understanding of training and
recovery.
RUNNING POWER FROM THE WRIST
Polar Running Power is an easy way to monitor real time power in
running without any sensors. Running power provides additional data
to analyze your running economy and performance improvements,
and gives you a more comprehensive insight into the intensity of your
running sessions.
WRIST-BASED HEART RATE TRAINING
The cutting-edge wrist-based Polar Precision Prime sensor fusion
technology combines optical heart rate measurement with skin
contact measurement providing accurate wrist-based heart rate
monitoring throughout the day, even in the most demanding training
conditions.
Congratulations on your great choice! In this guide we’ll walk you
through the rst steps in starting to use your new Polar Vantage V.
2. To set up your watch, choose your language and preferred setup
method. The watch gives you three options for setup: set up (A) with
a mobile device, (B) with a computer or (C) from the watch. Browse
to the option most convenient for you with UP/DOWN and conrm
your selection with OK. We recommend option A or B.
To get the most accurate and personal training and activity data,
it’s important that you’re precise with the settings in the setup.
TOUCH DISPLAY*
• Tap the display to choose items
• Swipe up or down to scroll
• Swipe left or right in time view to view different watch faces
*H10 heart rate sensor required
*Disabled during training sessions
-
1
-
2
Polar Vantage V Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Polar Pacer Pro User guide
-
Polar Vantage V Titan Quick start guide
-
Polar Vantage V User manual
-
-
Polar Pacer GPS Running Watch User guide
-
-
-
-
-
Polar H9/H10 Heart Rate Monitor Chest Strap User manual