ITT Controls RMG RPM-CMTC WITH DIRECT-MOUNT ERT is a positive displacement meter used to measure natural gas and other various non-corrosive industrial gases (air, nitrogen, carbon dioxide) over a wide range of flow rates and operating pressures. It features ANSI B 109.3 compliance, 7 meter sizes ranging from 1500 to 16,000 CFH, connections from 2" to 4", and a heavy-duty design of the body to resist bending and prevent "lock ups". Additionally, it boasts high rangeability from low flow to high flows, ensuring accuracy, and a low-pressure drop across the meter even at high flows.
ITT Controls RMG RPM-CMTC WITH DIRECT-MOUNT ERT is a positive displacement meter used to measure natural gas and other various non-corrosive industrial gases (air, nitrogen, carbon dioxide) over a wide range of flow rates and operating pressures. It features ANSI B 109.3 compliance, 7 meter sizes ranging from 1500 to 16,000 CFH, connections from 2" to 4", and a heavy-duty design of the body to resist bending and prevent "lock ups". Additionally, it boasts high rangeability from low flow to high flows, ensuring accuracy, and a low-pressure drop across the meter even at high flows.
ITT Controls RMG RPM-CMTC WITH DIRECT-MOUNT ERT is a positive displacement meter used to measure natural gas and other various non-corrosive industrial gases (air, nitrogen, carbon dioxide) over a wide range of flow rates and operating pressures. It features ANSI B 109.3 compliance, 7 meter sizes ranging from 1500 to 16,000 CFH, connections from 2" to 4", and a heavy-duty design of the body to resist bending and prevent "lock ups". Additionally, it boasts high rangeability from low flow to high flows, ensuring accuracy, and a low-pressure drop across the meter even at high flows.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI