Dynaudio XEO 4 is a high-quality wireless speaker system that combines impressive sound quality with ease of use. With no need for speaker cables or an external amplifier, you can simply connect your XEO 4 speakers to a power source and start enjoying your favorite music. The speakers can be controlled with the included remote control or via the buttons on top of the cabinet, and they feature an interface display that indicates the operational state of the system.
Dynaudio XEO 4 is a high-quality wireless speaker system that combines impressive sound quality with ease of use. With no need for speaker cables or an external amplifier, you can simply connect your XEO 4 speakers to a power source and start enjoying your favorite music. The speakers can be controlled with the included remote control or via the buttons on top of the cabinet, and they feature an interface display that indicates the operational state of the system.
Owner’s Manual
Xeo 4 / Xeo 6
English
2 Dynaudio
All Apple products are trademarks of Apple Inc.
All Sony products are trademarks of Sony Electronics Inc.
All Sonos products are trademarks of Sonos Inc.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
All Google products are trademarks of Google Inc.
Other trademarks and trade names are those of their respective owners.
An update to this manual may be necessary due to product improvements and new functions.
The latest version of this manual is available on the Internet at www.dynaudio.com/support/manuals
3Xeo 4 / Xeo 6
Thank you
for choosing Dynaudio Xeo.
Xeo combines the latest wireless technology with impressive sound quality and makes listening to
music truly comfortable and easy.
The next few pages contain important information on connecting the system and its operation to
ensure perfect function and the best-possible sound quality.
We hope you have a great time listening to your favorite music,
Dynaudio
About this product
Xeo consists of several high-quality components that are optimally matched. When combined, they
can fulll the most demanding requirements for a wireless multi-room and multi-source system.
The speaker Xeo 4 and Xeo 6 minimize your system to the essentials: The audio source and the
speakers. A high-end digital amplier is integrated into the speakers, so speaker cables and external
ampliers become obsolete. With Auto Play, connection is automatic. Xeo can be used with anything
that plays music: computer, mobile phone, personal player, video system, docking station, network
player, streaming client, TV, hi audio system, anything. The music from your computer nally sounds
great. Videos from the internet nally sound great. Even your smartphone nally sounds great
Optional components like Xeo Hub or Dynaudio Connect enable setting up a wireless multiroom
system without any restrictions to the highest sound quality. The speakers can be fully controlled with
a remote control while buttons on top of the cabinet let you switch it on/o or change the volume. The
operational state of the system is indicated by LEDs on the front.
About this manual
This manual describes the operation of the Xeo 4 and Xeo 6 speaker. Information about the Xeo 2
speaker and the Xeo modules (Hub, Connect, Extender, Link) can be found in the Owner´s manual
provided with these products.
4 Dynaudio
Important Safety Instructions 5
Unpacking 7
Packaging material 7
Disposal 7
Scope of delivery 8
Xeo speakers 8
Xeo Hub 9
The Xeo system 10
Components 10
Combination examples 11
Connection and operation 13
Remote control 13
Control elements 13
Xeo Hub 14
Connections and control elements 14
Connection 15
Xeo speakers 16
Connections and control elements 16
Cloth cover 17
Setting up 17
Interface display 18
Connecting the power cable and adjusting 20
Switching on 20
Selecting a Hub or input/autoplay function 20
Fixing the volume 21
Standby 21
Malfunctions 22
Technical data 23
Annex 24
Connection options 24
Division into audio zones 26
Declaration of Conformity (EU only) 27
Reminding (USA and Canada only) 28
IC NOTICE 29
MPE Reminding 29
Table of Contents
5Xeo 4 / Xeo 6
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer‘s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
USA and Canada only: A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not t into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
14. WARNING: To reduce the risk of re or electric shock, this apparatus should not be exposed
to rain or moisture and objects lled with liquids, such as vases, should not be placed on this
apparatus.
15. To completely disconnect this equipment from the mains, disconnect the power supply cord plug
from the receptacle.
16. The mains plug of the power supply cord shall remain readily operable.
6 Dynaudio
Speakers and Hub power supply
WARNING
RISK OF ELECTRIC SHOCK! DO NOT OPEN!
If the speakers or Xeo power supply unit are connected to the mains voltage, a dangerous
electrical voltage is present inside.
► Use the supplied power cable to connect the speakers to the mains voltage. Make sure that the
power supply cable is not damaged; replace it with a new one if it has been damaged.
► Use the supplied power supply unit to connect the Xeo Hub to the mains voltage. Make sure that
the power supply cable is not damaged; replace the unit with a new one if it has been damaged.
► To reduce the risk of electric shock, do not remove the back panel of the speakers and never
open the speaker or Xeo power supply unit housing.
► Do not expose the speaker or the Xeo power supply unit to rain or moisture.
► No user serviceable parts inside. Refer servicing to qualied personnel.
► Do not operate defective speakers or Xeo power supplies and disconnect them from the mains
voltage if defect. Please contact your Dynaudio Xeo distributor if you have any problems. Dis-
tributor addresses can be found in the Internet at www.dynaudio.com.
Remote control battery
WARNING
Danger of explosion
Danger of explosion if battery is incorrectly replaced.
► Replace only with the same or equivalent type.
WARNING
Chemical burn hazard
If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours
and can lead to death.
► If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
7Xeo 4 / Xeo 6
Unpacking
After unpacking, make sure the system is complete and check the device and all accessories for
transport damage. Transport damage may be expected if the packaging is already severely harmed.
Do not attempt to commission a damaged device. If the contents are incomplete or damaged, please
contact your Dynaudio Xeo distributor. Distributor addresses can be found in the Internet at
www.dynaudio.com.
Packaging material
The packaging has been designed so that it may be reused if it was not damaged during transport.
Keep the packaging and use the original packaging for all further transport.
Disposal
Disposal of used electrical and electronic equipment (applicable in European countries with
separate collection systems for this equipment)
This symbol on the product or its packaging indicates that the product may not be treated as
household waste. Instead it must be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health. The recycling of
materials helps to conserve natural resources. For more detailed information on recycling this product,
please contact your local authority, community waste disposal oce, or the shop where you purchased
the product.
8 Dynaudio
Scope of delivery
Xeo speakers
2 Xeo speakers Xeo 4 or Xeo 6
2 Xeo speaker cloth covers
2 Xeo speaker power cables (country-specic version, length: 2.5 m)
1 Xeo remote control
1 Xeo rst time setup manual (quick guide for installation, not shown)
9Xeo 4 / Xeo 6
Xeo Hub
1 Xeo Hub
1 Xeo power supply unit with micro USB cable (country-specic version)
1 stereo analog cable (jack 3.5 mm – 3.5 mm, length: 1.5 m)
1 stereo analog cable (RCA – RCA, length: 1.5 m)
1 optical digital cable (Toslink – Toslink, length: 1.5 m)
1 USB cable (USB – mini USB, length: 1.5 m)
1 Xeo rst time setup manual (quick guide for installation, not shown)
10 Dynaudio
The Xeo system
Components
Xeo 2
Xeo 4
Xeo 6
The active Xeo 2, Xeo 4 and Xeo 6 speakers receive the wireless signals from
the Hub or Connect and play them back in optimal sound quality. They have an
integrated amplier and can be controlled with the Xeo remote control. A display
indicates the operational state of the system and lets you switch it on/o or change
the volume without using the remote control.
Xeo remote
control
The Xeo remote control can be used to turn the speakers on and o, change the
volume, and select a Hub or Connect and its connected signal sources.
Dynaudio
Connect and
Xeo Hub
The Dynaudio Connect and Xeo Hub are the control centers for the Xeo system.
Both oer a new level of wireless connectivity and convenience. Signal sources
such as tuners, receivers, CD players, TVs, streaming clients, network players,
MP3 players, or computers are connected to them. Signals are sent wirelessly and
lossless to the connected Xeo or Focus XD speakers (or Xeo Link) where they are
then played back.
Xeo
Extender
The Xeo Extender extends the reception range of the Xeo Hub. As a result, Xeo
speakers or other Xeo components can be operated further away from the Xeo Hub
or Dynaudio Connect.
Xeo Link The Xeo Link receives wireless signals from a Xeo Hub or Dynaudio Connect
and outputs analog and digital signals from its connections. As a result, you can
also connect active subwoofers, active speakers, or other components to the
Xeo system. Xeo Link can also be connected with a 1st generation Xeo Hub
(transmitter).
11Xeo 4 / Xeo 6
Combination examples
Below you will nd several examples of Xeo component combinations. The high level of exibility in
the Xeo system enables even more variants. Ask your Dynaudio distributor to nd the perfect solution
for your needs.
Xeo 2 only:
Smartphone + Xeo 2 speaker
or
Analog/digital source + Xeo 2 speaker
Hub or Connect + speaker
Hub or Connect
For a larger range:
Hub or Connect + Extender + speaker
Hub or Connect Extender
12 Dynaudio
For additional speakers:
Hub or Connect + speaker + Link + active
component (e.g. active subwoofer, active
speakers, or power amplier and passive
speakers)
This example would also be possible with only
a Hub, Link, and active component.
Hub or Connect
Link
NOTE: The Extender and Link may also be combined. Figures show a Hub.
13Xeo 4 / Xeo 6
Connection and operation
This section describes the connections and control elements for the Xeo components. Please contact
your Dynaudio Xeo distributor if you have any problems with connection and start-up. Distributor
addresses can be found in the Internet at www.dynaudio.com.
Remote control
The Xeo remote control can be used to turn the speakers on and o, change the volume, and select
a Hub and its connected signal sources. If the speakers are being operated in stereo mode (right/left),
commands will always apply to both of the speakers.
Control elements
MUTE Muting the speakers
► Press
to mute or unmute the
speakers.
Fixing the volume
► Press for at least 2 seconds to set a high volume
for the speakers (see page 21).
ON/OFF Speaker on/o
► Press
to switch on the speakers.
► Press for standby mode. Press
for at least 5 seconds to put the
speakers in sleep mode.
Reset
► Press for at least 5 seconds to reset the speakers
to the factory settings.
VOLUME Volume control
► Press
or to raise or lower the volume level.
INPUT
1/2/3/4
Signal source
► Press to select a signal source: Line, Optical, Coax or USB
HUB
A/B/C
Hub
► Press to select one of the three possible Hubs A, B, or C.
14 Dynaudio
Xeo Hub
Connections and control elements
Front plate
1 Operational
state
= connection to a speaker, Extender, or Link
= searching for a connection, = no connection
Rear plate – inputs
1 Aux In Input for cable with stereo jack (3.5 mm stereo)
Connect devices here that have an output for the stereo jack.
Line In Input for cable with RCA plug
Connect devices here that have an output for the RCA plug.
NOTE: If a device is connected in parallel at Aux in, only that device will be
played back.
2 Optical In Input for optical digital cable (Toslink)
Connect devices here that have an optical digital output.
3 Coax In Input for electrical digital cable (coax)
Connect devices here that have an electrical digital output.
4 USB In Input for USB cable
Connect your computer’s USB output here. The Hub will then work as a
sound card.
1
15Xeo 4 / Xeo 6
Rear plate – other connections and control elements
Ethernet Network connection
Intended for future use.
Id Transmission channel
If you assign an ID, you can select the desired Hub from several Hubs using the
remote control.
In addition, each ID has its own transmission channel: A = 2.4 GHz, B = 5.2 GHz,
C = 5.8 GHz. If the transmission quality is poor or there is a disruption caused by
other radio systems, changing to a dierent channel may produce an improvement.
Power Connection for power supply unit
Connect the delivered Xeo power supply unit here.
Do not use a dierent power supply unit!
Connection
1. Connect your signal source to the appropriate input on the Hub.
See „Connection options“ on page 24 for a selection of signal sources.
2. Select a Id if desired. Default Id is A.
3. Connect the Hub to the mains voltage using the POWER connection and the Xeo power supply
unit. Do not use a dierent power supply unit!
NOTE: If you connect Xeo Hub via a USB cable to a computer (that is switched on), you do not need an
additional mains connection.
16 Dynaudio
Xeo speakers
Connections and control elements
A Speaker
Position
Sound adjustment (depending on the position of the speakers)
• Neutral = with free-standing placement
• Wall = if placed near a wall
• Corner = if placed in a corner
Speaker placement
• Left = left speaker for stereo mode
• Mono = if only using one speaker
• Right = right speaker for stereo mode
B Speaker
ID / Zone
Selection of audio zones
Speakers assigned to dierent zones can be controlled separately via the remote
control. The zones are identied as Red, Green, and Blue.
C Power Power switch
• I = The speaker is on. The speaker can be activated and deactivated via the
remote control. If the speaker is activated and there is no signal, it will switch to
standby mode.
• O = The speaker is completely o.
D
Mains socket
To connect the speaker to the mains voltage.
Neutral
Zone
Power
Red
Green
Blue
Wall
Speaker
Position
Speaker Id
Corner
Left
Right
Mono
A
B
C
D
17Xeo 4 / Xeo 6
Cloth cover
The cloth cover has been designed so it does not inuence the sound dispersion of the speaker. The
cloth cover is attached to the housing with magnets and may be removed if needed.
Setting up
CAUTION
Spikes with pointed ends
Xeo 6 oor-standing speakers are delivered with spikes for permanent installation on the
oor. The pointed ends of the spikes may result in injuries and damage delicate oors.
► Pay attention that you do not injure yourself with the spikes.
► We recommend inserting the spikes in aluminum feet if you have delicate oors, such as parquet
or laminate.
► Position the speaker in the desired location.
– Do not expose the speakers to direct sunlight, heat, or moisture.
– Do not place the speakers near devices with strong electromagnetic radiation or devices that
could be destroyed or damaged by magnetic elds.
18 Dynaudio
Interface display
The display on the housing indicates the operational state of the speakers and system using LEDs
with various colors and ash functions.
Buttons on the display
On/o switch
Pressing this button for longer than
2 seconds will switch the speaker on or
to standby mode.
Input selection
A brief press of this button switches
between the inputs (1 → 2 → 3 → 4 →
1...). Only the inputs in use are shown.
Volume control
Increases or decreases the volume.
LED display meanings
On-state The LED is illuminated in blue. The speaker is switched on and an audio signal is played
back.
On-state The LED is blinking in blue. The speaker is switched on, but an audio signal cannot
be found.
O-state The LED is illuminated dimly in red. The speaker is in standby mode.
Hub connection The LED is blinking in red. There is no active Hub or no connection to a Hub
possible.
Switch-on process The LEDs are illuminated one by one. The speaker is being switched on.
Switch-o process The LEDs go out one by one.
In the nal state, only one LED is
illuminated dimly in red.
The speaker is being switched o.
19Xeo 4 / Xeo 6
Select a Hub One of the three LEDs is blinking. LED 1 = Hub A
LED 2 = Hub B
LED 3 = Hub C
Select an input One of the four LEDs is blinking. LED 1 = INPUT 1
LED 2 = INPUT 2
LED 3 = INPUT 3
LED 4 = INPUT 4
Hub search The blue LED is blinking; the lights in
the white LEDs move back and forth.
Searching for an active input on the Hub
Synchronization The red LED is blinking; the lights in the
white LEDs move back and forth.
System synchronization
Volume, mute A number of white LEDs are illuminated. The number of LEDs indicates the selected volume.
The rst LED is blinking. The speaker is muted.
20 Dynaudio
Connecting the power cable and adjusting
1. In stereo mode:
– Select Left operating mode for the left speaker.
– Select Right operating mode for the right speaker.
– Select Mono for mono operating mode.
2. Set the speaker position switch that best describes the speakers need for acoustic compensation.
– Neutral = with free-standing placement
– Wall = if placed near a wall
– Corner = if placed in a corner
3. Select the Red, Green, or Blue zone. In stereo, select the same zone for the right and left
speakers. Speakers with dierent zone settings can be controlled separately via the remote control
(see „Division into audio zones“ on page 26 for further information).
4. Use the power cable to connect the speaker to the mains voltage.
Power it on using the power switch on the rear.
Switching on
To switch the speaker on from standby mode:
► Press
on the interface display or press on the remote control.
▼ The speaker will automatically search for an active Hub and an audio signal. If found, the signal
will be output (autoplay function).
▼ If there is no input signal, the speaker will keep on scanning the inputs for the next 20 minutes
and go to sleep mode.
If there is no input signal, the speaker will go into standby mode after a certain period.
Selecting a Hub or input/autoplay function
After it is turned on, the speaker automatically searches for an audio signal and then plays it back
immediately. If several signal sources are active, one of the signal sources will be played back. Select
a dierent Hub or input if you want to play back a dierent signal source.
To select a dierent Hub or input:
► Press HUB A, B, or C or INPUT 1, 2, 3, or 4 on the remote control.
▼ The selected signal source will be played back.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
Dynaudio XEO 4 Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Dynaudio XEO 4 is a high-quality wireless speaker system that combines impressive sound quality with ease of use. With no need for speaker cables or an external amplifier, you can simply connect your XEO 4 speakers to a power source and start enjoying your favorite music. The speakers can be controlled with the included remote control or via the buttons on top of the cabinet, and they feature an interface display that indicates the operational state of the system.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Dynaudio Xeo Owner's manual
-
-
Dynaudio Xeo Link Owner's manual
-
-
-
Dynaudio Xeo 10 Owner's manual
-
Hansong(Nanjing) Technology Xeo User manual
-
Dynaudio Focus XD Owner's manual
-
Dynaudio Focus 60 XD Owner's manual
-