User Manual
Model No.: L8
Congratulations on your
new Model L8 Dual Motor
electric scooter !
We are happy you chose
to Ride new L8 Dual Motor
Electric Scooter.
We hope you find it to be
a Great riding experience,
Adding efficiency and fun
to Your daily commuting.
This manual was written to help you understand the proper use
and maintenance of model L8 electric scooter. It is important
for you to understand your new MODEL L8 electric scooter; its
features and performance, so that you will enjoy the most from
your first and every ride. Also, it is important that your first ride
with model L8 will be in a remote location, without any
obstacles.
Always follow the local laws and regulations.
• Never ride your L8 scooter in conditions of poor visibility.
• Do not do stunts, wheelies or jumps. They will increase your
chances of injury and damage your model L8.
• Never carry passengers
The responsibility for model L8 maintenance is yours, and will help
reduce risks of injuries. Therefore, read this manual and follow it's
instructions, they will help you avoid these risks.
We're not liable for incidental damages or consequential damages
due directly or indirectly to the use of this product.
WARNINGS & GENERAL INFORMATION
L8 DUAL MOTOR
ANTI SKID GRIPS
LIGHT BUTTON
10 INCH
TUBELESS
TYRE
REAR SUSPENSION
CHARGING PORT
ALUMINIUM DECK
QUICK FOLDING
MECHANISM
USB CHARGER PORT
BRAKE LEVER
FRONT LIGHT
SUSPENSION
BRAKE DISC
LITHIUM ION BATTERY
48V-20.8Ah
HANDLEBAR
MUDGUARD
KICK STAND
HORN
DISPLAY / THROTTLE
800W MOTOR
800W MOTOR
Specification
Size
Overall size (MM)
1160*570*1210 mm
Size after folding (MM) 1140*220*470 mm
Carton size (MM) 1200*270*540 mm
Weight
Max. Loading (KG)
150kg
Net weight (KG)
28kg
Application
People Age Adult
Speed
Top speed (KM/H) 45km/h
Range (KM)
10Ah 30km, 15Ah 45Km, 20Ah 60km
( With 75kg load, on a flat road )
Grade Ability 35 degree
Working temperature
-10
℃
～40
℃
Storage temperature
-10
℃
～40
℃
Battery
Battery type 18650 Lithium battery
Rated voltage (V)
48V
Input voltage (V)
54.6V
Battery capacity (AH) 20.8Ah
Motor
Motor type
DC brushless motor
Motor rated power
800 Watt * 2 Motors
Rated output power
Peak 1200 Watt * 2 Motors
Rated voltage 48V
Charger
Rated power (W)
109.2W
Input voltage (V)
100-230VAC
Output voltage
(V) 54.6V
Rated current 2A
Charging time 10 Hours
Other features
Wheel size 10 inch tubeless tires
Frame material
Aluminium alloy 6061
Waterproof IP54
Suspension
Front suspension*2 + Rear suspension*2
Display color display
Speed up
Throttle
Brake front disc brake + rear disc brake + electronic brake
Color Black
Optional Double charging point, Seat
470MM
1140MM
1160MM
1210MM
Fold the handle-bar
Pull l
eft
Pull right
Unfold the handle-bar
loosen quick release
Press quick release
ON/OFF button MODE button
Battery status
THROTTLE POWER ON
Pressing to power the scooter on.
THROTTLE POWER OFF
Press for three seconds to shut down the system.
AUTO OFF
After five minutes of non-using any function, the scooter will automatically shut down.
In power on condition, pressing by turns, we can find TRIP，ODO，VOL on the LCD
display. TRIP is Single mileage, ODO is cumulative mileage, VOL is battery voltage
Pressing by turns to change the speed mode, 1 is slow speed, 2 is medium speed,
3 is fast speed.
DISPLAY INSTRUCTION
Parameter settings
Pressing together with at the same time, will enter the instrument parameter
setting interface.
First of all we can see P00, then press by turns, we can find P01, P02, P03, P04, P05,
P06, P07, P08, P09
P00:
Wheel diameter setting
P01: Under-voltage setting
P02: Nu
mber of pole pairs setting
P03: Speed signal selection setting
P04: Km / Mile selection setting
P05: Non-zero start and zero start selection
settings
P06: Cruise and non-cruise selection
settings
P07: Soft start and hard start selection settings
P08: Speed limit adjustment in percentage
P09: EBS brake strength adjustment
RECORD SERIAL NUMBERS:
Write down the serial number of your model L8. Keep this
information separately and in a safe place. Each model L8 has a
unique serial number. These numbers can provide information that
may be useful later on for insurance claims and in case of loss or
theft.
To find your model L8 serial number:
1. The number is on the backside of the board, for example as
below:
Serial number: 030921807023313
SERIAL NUMBERS
HOW TO FOLD L8 SCOOTER
1
2
3
4
5
6
Your model L8 has an external charger.
Connect the charging cable to Model L8's charging socket under the footboard, on
the right side at the rear. Than connect the chargers electric cable to an electrical
outlet.
Charging Light Red - Battery is charging.
Charging Light Green - Charging is complete.
CHARGING AND BATTERY
MAXIMIZE YOUR BATTERY’S PERFORMANCE:
1. For its initial charge, FULLY charge your L8
This conditions the battery for future life-span
2. Do NOT leave a fully charged battery connected to a charger,
since overcharging may shorten it’s lifetime
3. Avoid extreme temperatures Always try to keep the battery between 15°c and 25°c
(59°F and 77°F). Extreme temperatures reduce the capacity and lifetime of the
battery. A device with a hot or cold battery may not work temporarily
4. At least once a month fully charge the battery
5. From time to time discharge the battery by riding.
Use all stored energy in the battery
6. Before storing it for a long period charge the battery half way
Do not operate the scooter while charging!
Charge the battery only using Kerry Motors approved charger
The use, storage or charging of the L8 battery outside specified limits may result in the
annulment of the warranty, battery damage, and an ineffective battery charge
DO NOT CUT, OPEN, CRUSH OR PUNCTURE BATTERIES!
IN THE EVENT OF A BATTERY LEAK, PREVENT CONTACT OF LIQUID WITH SKIN OR EYES.
IF THIS HAPPENS, WASH THE AFFECTED AREAS IMMEDIATELY WITH WATER AND SEEK
MEDICAL HELP
BATTERY SAFETY REGULATIONS:
SAFETY DRIVING ATTENTION
Get to know your L8 before driving it Test your control over it. Make
your turns slowly and cautiously, and give yourself stopping distance
To gain control over your scooter, practice your first ride on your L8 in
an open space with no obstacles to disturb you
The L8 requires a short adjustment and break-in period
for all moving parts to adjust themselves into their correct position
Before each ride always:
1. Check your brakes function
2. Check the tires for signs of wear
Spin them to make sure that they are not yet in need of replacing Make
sure that the wheels are freely rotating clear of the brakes
3. Perform a visual inspection :
That all screws and nuts are tight and in place
Note if anything looks amiss, or is showing signs of wear
If you are unsure, bring your L8 to Kerry Motors authorized distributor
RIDING TECHNIQUE:
Before riding position your foot as close as possible to the front section of
the scooter, and your other foot on the ground. Make sure that your driving
route is clear
To start riding, boost yourself forwards (as on non-motorized scooters)
with your foot that is on the ground. Place it on the scooter immediately
afterwards and press the thumb lever downwards, tilting your body
forwards, so you won’t fall backwards during acceleration
As you accelerate, lean forwards.
As you brake, tilt your weight backwards!
Avoid putting body weight on the handle bars whilst accelerating and
decelerating!
Keep one foot behind the other, (it's more comfortable to place one foot
forward and the other one turned backwards at 70-90°, like on skate/
surfboard). It will help you gain more stability
Turns - The turns on L8 are done as on skis/surf/snowboard. The handle-bar
should be in parallel to the body. Before turning look at the approaching
direction and make sure turning is safe
Braking - Tilt your weight backwards so that the brake action will come
through the feet and not through the handlebar and steering system. It is
best to learn how to adjust the centre of gravity while stopping, otherwise
there is a dual concern: forward tipping over and/or wear and breaking of
the handlebar and steering system
Riding, like most sports, involves risks of injury and damage.
By choosing to ride L8 scooter the responsibility
and all inherent risk is on you. It is crucial that you know,
understand and act according to safety rules
Warranty Card
Product
Item Name:
Model:
Serial Number:
Information
User
Name: Telephone: Postcode:
Info
Address:
Information
Name: Telephone:
of Distributer
Sale Date: Sales Address:
Submission
Maintenance Situation Maintenance Results Signature
Date
Maintenance
Record
/
