Phanteks Enthoo Evolv Shift Air Owner's manual

Brand: Phanteks

Model: Enthoo Evolv Shift Air

Type: Owner's manual

USER MANUAL V2.0

Thank you

for choosing

1. What’s inside?

Specications 3

Exploded view 4

Accessories 5

2. Setup your system

Overview 6

Remove side panels 8

Cable management 9

Installing power supply 10

Adjust case feet 11

Installing motherboard 12

Installing drives 13

Installing cooling 14

Dual AIO setup 15

Installing graphics card 16

Connecting front I/O 18

3. Pro tips

Dust lters 19

Expand & upgrades 20

4. Support

Warranty 22

TABLE OF CONTENTS

SPECIFICATIONS

Dimensions

Shift (WxHxD)

Shift Air (WxHxD)

Height (Incl. Feet)

Form Factor

Materials

MB Support

PSU Support

Front I/O

PCI slots

Internal 3.5”

Internal 2.5”

Front

Bottom

Front

Bottom

Premium Fan 140 mm

GPU Bracket

PCI-e x16 Risercable

2.5” SSD bracket

CPU Cooler

Graphics card length

Bottom Radiator *

*Depending on GPU length

Contact (International)

Contact (America)

Warranty

170 mm x 470 mm x 274 mm

(6.7 in x 18.5 in x 10.8 in)

186 mm x 470 mm x 274 mm

(7.4 in x 18.5 in x 10.8 in)

484 mm (19.1 in)

Small Form Factor

Anodized aluminum panels

Powder coated steel chassis

Tempered glass / Fabric mesh side panels

Mini-ITX

SFX

Power button, 2x USB 3.0, RGB button

2x (Can be upgraded to 3 if no 3.5” is installed)

2x 2x (1 installed)

1x 1x

120 -

For dual aio setup: max 120x27 mm radiators

See page 22

82mm (3.2 in)

350 mm (13.8 in)

55 mm (2.2 in)

[email protected]

5 Years*

CASE SPECIFICATIONS

INCLUDED ACCESSORIES

CLEARANCE

SUPPORT

PCI SLOTS & DRIVE BAYS

FAN

RADIATOR

120 MM

140 MM

1. Chassis

2. Front Panel

3. Rear Panel

4. Top Grill

5. Bottom Grill

6. Right Side Panel

7. Left Side Panel

8. GPU Bracket

9. Case Feet

10. SSD bracket

11. Dustfilters

EVOLV SHIFT

GLASS PANELS

EVOLV SHIFT AIR

FABRIC PANELS

EXPLOADED VIEW

ACCESSORY BAG

PREMIUM FAN 140 MM

- Pre-installed

- Hight static pressure

- Silent operation

2.5” SSD BRACKET

- 2 Pre-installed

- For 2.5” SSD

TOOLBOX

Fan screw M3x5 mm

Motherboard

/ SSD

6-32x6 mm

PSU/GPU

bracket

18x 1x4x8x

6-32x6 mm

Thumb screw

- 6x Zip Tie 150 mm

- Phanteks Logo Badge

- 4x Rubber Feet (for horizontal placement)

6-32x8 mm

HDD screw

6-32x8 mm +

Rubber rings

Drop-N-Lock SSD

ACCESSORIES

The Evolv Shift gives you the

ultimate flexiblity to place it

anywhere in the house.

CABLE ROUTING

Route your cables through the

top or bottom of the rear panel.

EASY ACCESS

Reach your best I/O

with just a press

OVERVIEW

PLACE HORIZONTAL

Use the four rubber feet

included in the toolbox.

PLACE VERTICAL

Minimize the footprint.

LOOSEN THUMB SCREWS

LOOSEN:

SLIDE SIDE PANEL UP

TAKE SIDE PANEL OUT

Each panel is mounted securely with 4 slide to lock pins

and 2 captive thumb screws. Removing all side panels

gives you full 360 degree access to the whole system.

REMOVE SIDE PANELS

REQUIRES:

FIRST TIME USE

DEDICATED CABLE AREA

Bundle excess cables with velcro ties.

CLEAR OUT ZONE

Keep cables out of this zone for easy

panel installation.

MOTHERBOARD CABLE COVER

Flip open for easy access.

CABLE MANAGEMENT

Pull

CONNECT POWER ADAPTER

Don’t forget to turn on the power

switch on your powersupply.

PULL OFF BOTTOM GRILL

INSTALL POWERSUPPLY

INSTALLING POWERSUPPLY

REQUIRES:

VERTICAL

HORIZONTAL

4x RUBBER FEET

CHANGE POSITION

4x4x

REMOVE:

REPOSITION:

2X FOOT POSITIONS REMOVE FOOT

ADJUST CASEFEET

REQUIRES:

These standoffs have a

special collar to keep the

motherboard in place

when installing vertically.

The motherboard is placed vertical with the rear I/O pointing upwards. Please consult

your motherboard manual for more detailed instructions.

Keep cables clear

from fanblades.

INSTALLING MOTHERBOARD

REQUIRES:

EXTERNAL HDD OR SSD

INTERNAL SSD

2.5” SSD (OPTIONAL)

1. Install

Drop-N-Lock

Rubber rings

Mount the 3.5”

HDD on the pre-

installed rubber

rings

2. Install

SSD Bracket

3.5” HDD

INSTALLING DRIVES

REQUIRES:

FRONT

BOTTOM

140

FAN

140

FAN

120

FAN

120

FAN

MOUNTING HOLES:

120mm Radiator slots.

120mm and 140mm Fan /

Radiator slots.

INSTALLING COOLING

DUAL AIO SETUP:

- Support up to dual 120mm radiators

- Max radiator thickness is 27mm.

120mm Radiators

MAX 160mm clearance

Radiator+Fan+GPU

Tubing facing

window panel

For a Dual AIO setup, we

recommend to use the

horizontal slots

facing the radiators sideways.

DUAL AIO SETUP

REMOVE:

PREPARE GPU BRACKET

The GPU can be installed in 2 different

orientations. Re-position the stand-off

screw accordingly.

We recommend to:

A. Face cooler in for blower style GPU.

B. Face cooler out for fan cooled GPU.

INSTALLING GRAPHICS CARD

INSTALL GRAPHICS CARD

Slide GPU into the case

Secure with thumbscrew

Lock with case screws

SLIDE

The GPU can be installed with the

fans pointing inward or outward for

the best cooling performance.

We recommend to install the GPU

(aircooled) facing outwards in the

Evolv Shift Air model for the best

performance.

REQUIRES:

12V SATA input for

RGB controller

RGB connector

(expansion)

TO PSU

TO PHANTEKS

RGB PRODUCTS

Power SW

USB 3.0

TO MOTHERBOARD

POWER BUTTON

RGB BUTTON

Press and hold: LED On/O

Short Press: Choose LED Color (10 colors)

Long Press: Choose Mode

Mode 1: STATIC

Mode 2: BREATHING

Mode 3: COLOR CYCLE

SHORT

LONG

HOLD

Short Press: Turn on your system

Press and hold: Turn o your system

SHORT

HOLD

CONNECTING FRONT I/O

Page is loading ...

Phanteks Enthoo Evolv Shift Air Owner's manual

Phanteks Enthoo Evolv Shift Air Owner's manual

Phanteks Enthoo Evolv Shift Air Owner's manual

Related papers

Other documents