Minka-Lavery 4732-113 User manual

Brand: Minka-Lavery

Model: 4732-113

Type: User manual

Minka-Lavery 4732-113 is a versatile and stylish lighting fixture that can elevate the ambiance of any room. With its adjustable fixture arms, you can customize the light's direction to suit your needs. The fixture comes with a shade that can be easily assembled and installed, providing a warm and diffused glow. The installation process is straightforward, and the fixture can be mounted on a ceiling outlet box. The fixture supports a variety of bulbs, giving you flexibility in choosing the desired brightness and color temperature. It also features a ground wire for added safety.

Minka-Lavery 4732-113 is a versatile and stylish lighting fixture that can elevate the ambiance of any room. With its adjustable fixture arms, you can customize the light's direction to suit your needs. The fixture comes with a shade that can be easily assembled and installed, providing a warm and diffused glow. The installation process is straightforward, and the fixture can be mounted on a ceiling outlet box. The fixture supports a variety of bulbs, giving you flexibility in choosing the desired brightness and color temperature. It also features a ground wire for added safety.

ASSEMBLY THE FIXTURE (FIG. 1)

1. Shut off the power at the fuse box or circuit breaker. If

necessary, remove the existing fixture and its mounting

hardware from the ceiling.

2. Carefully unpack your new fixture and lay out all the parts in a

clear area. Take care not to lose any small parts necessary for

installation.

3. Adjust the fixture arms to its desired position.

4. Assemble the shade (E) onto the bracket (F) using the thumb

screw (D) well.

5. Thread the stem (I) into the coupling (G) tightly.

6. Install the bulb (not included) in accordance with the fixture’s

specifications. (DO NOT EXCEED THE MAXMUM WATTAGE

RATING!) (NE PAS DEPASSER LA PUISSANCE

NOMINALE MAXIMALE!).

7. Thread the nipple (I) into coupling (H), and secure with hex

nut.

8. Put the tube (J), tube cover (N), rubber washer (O), glass

diffuser (P), rubber washer (O), steel washer (R) over the

nipple (I) in order, and secure with hex nut (S) well.

9. Put the cover (T), rubber washer (U), crystal ball (V), rubber

washer (U), tube (X) over the nipple (I) in order and secure

with nut (Y).

10. Attach the mounting bar (M) to the outlet box using the outlet

box screws (K). The side of the mounting plate marked “GND”

must face out.

11. Follow the wiring instructions carefully (See Fig.2).

12. Attach the fixture main body onto outlet box by protruding

mounting screws (L) through mounting holes on the canopy

(A) and secure with ball nut (B).

CONNECTING THE WIRES (FIG. 2)

13. Connect the electrical wires as follows. Connect the smooth

wire from the fixture to the smooth (HOT) house wire.

Connect the ribbed wire from the fixture to the ribbed (Neutral)

house wire. Make sure all the wire nuts were secured. You

may wrap the connections with electrical tape. If your outlet

box has a ground wire (Green or Bare Copper) connect

fixture’s ground wire to it. Other wise attach the bare copper

fixture wire to the green ground screw on the mounting bar.

14. Tuck the wire connections neatly into the ceiling junction box.

Your installation is now complete. Turn on the power supply of

the junction box to test the fixture.

Fig.1

K

M

L

B

I

O

S

V

X

Y

H

G

U

A

INSTALLATION INSTRUCTION FOR FIXTURE #4732-113

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

Set A#A-010

-Crossbar

-Ground Screw

-Mounting screws (2)

1

Minka-Lavery 4732-113 User manual

Brand: Minka-Lavery

Model: 4732-113

Type: User manual

Minka-Lavery 4732-113 is a versatile and stylish lighting fixture that can elevate the ambiance of any room. With its adjustable fixture arms, you can customize the light's direction to suit your needs. The fixture comes with a shade that can be easily assembled and installed, providing a warm and diffused glow. The installation process is straightforward, and the fixture can be mounted on a ceiling outlet box. The fixture supports a variety of bulbs, giving you flexibility in choosing the desired brightness and color temperature. It also features a ground wire for added safety.

Download PDF

Related papers

Other documents