Bradley Smoker BS712 Owner's manual

Bradley Smoker
Brand
Bradley Smoker
Model
BS712
Type
Owner's manual
10-11-2013
Cleaning up
To Start Smoking
(The Smoke function can operate separately or together with the Oven)
1. PL00 display indicates the smoker has power when first plugged in.
2. Turn on the smoke function by pressing SMOKE. The indicator light above
the SMOKE button will be on.
3. Set the smoking time by pressing SMOKE TIMER. Use the buttons
to adjust the desired smoking time, then press SET (before the display stops flashing).
4. Bisquettes automatically advance twice to the burner when switched on, they will
continually advance one at a time thereafter for the duration of the smoke time set.
Each bisquette will smoke for approximately 30 minutes.
5. When finished, remember to dispose of the spent Bisquettes in the Deposit Bin
responsibly. To use the cleanout rod, push the rod in, turn 90 degrees, and pull straight
back to clear out all bisquettes. Replace it by pushing it in and turning 90 degrees left
or right to ensure it hooks into place. NOTE: The cleanout rod must be hooked-up out
of the way of advancing Bisquettes or they will jam.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Bradley Smoker BS712 Owner's manual

Bradley Smoker
Brand
Bradley Smoker
Model
BS712
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents