Siemens Electric Built-In Oven User manual
- Category
- Ovens
- Type
- User manual
This manual is also suitable for
2
Ú Table of contents
[en]Instruction manual
Important safety information .................................................... 3
Causes of damage .............................................................................4
Your new oven............................................................................ 5
Control panel .......................................................................................5
Buttons..................................................................................................5
Knob ......................................................................................................5
Display panel .......................................................................................5
Temperature control ...........................................................................6
Inside the oven....................................................................................6
Your accessories ....................................................................... 6
inserting the accessories ..................................................................6
Special accessories ...........................................................................7
Before the first use .................................................................... 7
Setting the time ...................................................................................7
Heating the oven.................................................................................7
Cleaning the accessories..................................................................7
Switch the oven on and off ....................................................... 8
Switching on ........................................................................................8
Switching off.........................................................................................8
Setting the oven ......................................................................... 8
Types of heating..................................................................................8
Selecting the temperature and type of heating required ............8
Setting the rapid heating function....................................................9
Time functions ......................................................................... 10
Setting the time-setting options in brief..................................... 10
Programming the timer................................................................... 10
Setting the cooking time................................................................. 10
Delaying the end time ..................................................................... 11
Setting the clock ..............................................................................11
Memory ..................................................................................... 11
Saving configurations to memory ................................................. 11
Using the memory ...........................................................................11
Sabbath mode .......................................................................... 12
Starting the Sabbath mode............................................................ 12
Childproof lock......................................................................... 12
Basic settings........................................................................... 12
Changing the basic settings .......................................................... 13
Automatic shut off ................................................................... 13
Cleaning function..................................................................... 14
Before cleaning ................................................................................ 14
Setting the cleaning level ............................................................... 14
After cleaning....................................................................................14
Care and cleaning.................................................................... 14
Cleaning products ........................................................................... 14
Removing the grill heating element.............................................. 15
Removing and refitting the wire shelves or left and right hand
side rails ............................................................................................ 15
Unhooking and hanging the oven door ...................................... 16
Removing and installing the door panels ................................... 16
Troubleshooting....................................................................... 17
Troubleshooting table .....................................................................17
Changing the oven bulb ................................................................. 18
Protective glass panels................................................................... 18
After-sales service................................................................... 18
E number and FD number ............................................................. 18
Energy and environment tips ................................................. 18
Environmentally-friendly disposal of waste ................................. 18
Saving energy................................................................................... 18
Eco hot air function .........................................................................19
Automatic programme............................................................. 20
Ovenware ..........................................................................................20
Preparing the dish ...........................................................................20
Programmes ..................................................................................... 20
Selecting and setting a programme............................................. 23
Advice on using the automatic program..................................... 23
Tested for you in our cooking studio..................................... 24
Cakes and pastries ......................................................................... 24
Suggestions and practical advice for baking............................. 26
Meat, poultry, fish............................................................................. 26
Tips for roasting and grilling.......................................................... 29
Slow cooking .................................................................................... 29
Tips for slow cooking...................................................................... 30
Au gratin, soufflés, toast................................................................. 30
Ready-made products..................................................................... 30
Special dishes .................................................................................. 31
Defrosting .......................................................................................... 31
Drying.................................................................................................32
Jam making ......................................................................................32
Acrylamide in food................................................................... 33
Test dishes ............................................................................... 33
Baking ................................................................................................ 33
Grilling................................................................................................34
Produktinfo
Additional information on products, accessories, replacement
parts and services can be found at www.siemens-home.com
and in the online shop www.siemens-eshop.com
3
: Important safety information
Read these instructions carefully. Only then
will you be able to operate your appliance
safely and correctly. Retain the instruction
manual and installation instructions for
future use or for subsequent owners.
This appliance is only intended to be fully
fitted in a kitchen. Observe the special
installation instructions.
Check the appliance for damage after
unpacking it. Do not connect the appliance
if it has been damaged in transport.
Only a licensed professional may connect
appliances without plugs. Damage caused
by incorrect connection is not covered
under warranty.
This appliance is intended for domestic use
only. The appliance must only be used for
the preparation of food and drink. The
appliance must be supervised during
operation. Only use this appliance indoors.
This appliance may be used by children
over the age of 8 years old and by persons
with reduced physical, sensory or mental
capabilities or by persons with a lack of
experience or knowledge if they are
supervised or are instructed by a person
responsible for their safety how to use the
appliance safely and have understood the
associated hazards.
Children must not play with, on, or around
the appliance. Children must not clean the
appliance or carry out general maintenance
unless they are at least 8 years old and are
being supervised.
Keep children below the age of 8 years old
at a safe distance from the appliance and
power cable.
Always slide accessories into the cooking
compartment correctly. See "Description of
accessories in the instruction manual.
Risk of fire!
■
Combustible items stored in the cooking
compartment may catch fire. Never store
combustible items in the cooking
compartment. Never open the appliance
door if there is smoke inside. Switch off
the appliance and unplug it from the
mains or switch off the circuit breaker in
the fuse box.
Risk of fire!
■
A draught is created when the appliance
door is opened. Greaseproof paper may
come into contact with the heating
element and catch fire. Do not place
greaseproof paper loosely over
accessories during preheating. Always
weight down the greaseproof paper with a
dish or a baking tin. Only cover the
surface required with greaseproof paper.
Greaseproof paper must not protrude over
the accessories.
Risk of burns!
■
The appliance becomes very hot. Never
touch the interior surfaces of the cooking
compartment or the heating elements.
Always allow the appliance to cool down.
Keep children at a safe distance.
Risk of serious burns!
■
Accessories and ovenware become very
hot. Always use oven gloves to remove
accessories or ovenware from the cooking
compartment.
Risk of burns!
■
Alcoholic vapours may catch fire in the hot
cooking compartment. Never prepare food
containing large quantities of drinks with a
high alcohol content. Only use small
quantities of drinks with a high alcohol
content. Open the appliance door with
care.
Risk of scalding!
■
The accessible parts become hot during
operation. Never touch the hot parts. Keep
children at a safe distance.
Risk of scalding!
■
When you open the appliance door, hot
steam may escape. Open the appliance
door with care. Keep children at a safe
distance.
Risk of scalding!
■
Water in a hot cooking compartment may
create hot steam. Never pour water into
the hot cooking compartment.
Risk of injury!
Scratched glass in the appliance door may
develop into a crack. Do not use a glass
scraper, sharp or abrasive cleaning aids or
detergents.
4
Risk of electric shock!
■
Incorrect repairs are dangerous. Repairs
may only be carried out by one of our
trained after-sales engineers. If the
appliance is faulty, unplug the mains plug
or switch off the fuse in the fuse box.
Contact the after-sales service.
Risk of electric shock and serious injury!
■
The cable insulation on electrical
appliances may melt when touching hot
parts of the appliance. Never bring
electrical appliance cables into contact
with hot parts of the appliance.
Risk of electric shock!
■
Do not use any high-pressure cleaners or
steam cleaners, which can result in an
electric shock.
Risk of electric shock!
■
When replacing the cooking compartment
bulb, the bulb socket contacts are live.
Before replacing the bulb, unplug the
appliance from the mains or switch off the
circuit breaker in the fuse box.
Risk of electric shock!
■
A defective appliance may cause electric
shock. Never switch on a defective
appliance. Unplug the appliance from the
mains or switch off the circuit breaker in
the fuse box. Contact the after-sales
service.
Risk of burns!
The appliance will become very hot on the
outside during the cleaning function. Never
touch the appliance door. Allow the
appliance to cool down. Keep children at a
safe distance.
Causes of damage
Caution!
■ Accessories, foil, greaseproof paper or ovenware on the
cooking compartment floor: do not place accessories on the
cooking compartment floor. Do not cover the cooking
compartment floor with any sort of foil or greaseproof paper.
Do not place ovenware on the cooking compartment floor if a
temperature of over 50 ºC has been set. This will cause heat
to accumulate. The baking and roasting times will no longer
be correct and the enamel will be damaged.
■ Water in a hot cooking compartment: do not pour water into
the cooking compartment when it is hot. This will cause
steam. The temperature change can cause damage to the
enamel.
■ Moist food: do not store moist food in the cooking
compartment when it is closed for prolonged periods This will
damage the enamel.
■ Fruit juice: when baking particularly juicy fruit pies, do not
pack the baking tray too generously. Fruit juice dripping from
the baking tray leaves stains that cannot be removed. If
possible, use the deeper universal pan.
■ Cooling with the appliance door open: only allow the cooking
compartment to cool when it is closed. Even if the appliance
door is only open a little, front panels of adjacent units could
be damaged over time.
■ Very dirty door seal: If the door seal is very dirty, the
appliance door will no longer close properly when the
appliance is in use. The fronts of adjacent units could be
damaged.Always keep the door seal clean.
■ Appliance door as a seat, shelf or worktop: Do not sit on the
appliance door, or place or hang anything on it. Do not place
any cookware or accessories on the appliance door.
■ Inserting accessories: depending on the appliance model,
accessories can scratch the door panel when closing the
appliance door. Always insert the accessories into the
cooking compartment as far as they will go.
■ Carrying the appliance: do not carry or hold the appliance by
the door handle. The door handle cannot support the weight
of the appliance and could break.
5
Your new oven
We will now describe your new oven. This chapter explains the
functions of the control panel and its individual elements.
Information is also provided about the oven's accessories and
internal components.
Control panel
Below is a general overview of the control panel. The display
panel cannot show all the symbols at the same time. Elements
may vary according to the model.
Buttons
Knob
Using the knob it is possible to change all the recommended
and configured values. The control knob symbol
Î shows the
value that can be changed.
The control knob is retractable. The rotary control knob is
retracted and returned by pressing the control.
Display panel
The display panel shows the recommended values that can be
changed using the control knob as necessary.
The screen is divided into three indicators.
■ Cooking method indicator
Displays the type of heating or operation selected.
■ Time indicator
Displays the time, the timer, the duration and the cooking end
time as well as the weight for the automatic program.
■ Temperature indicator
Displays temperature, grill or cleaning levels and the
programme number.
Rotation symbol
The
Î symbol indicates which value you can change with the
rotary selector.
2Q
2II
6WDUW
6WRS
&NJ
0
3
&OHDQ
Use
1 Buttons
2 Display panel
3 Knob
Symbol Button function
‡
Switching the oven on and off
"
Selects the type of heating
X
Selects the automatic program
l
Brief push = select memory
Long push = store in memory
s
Select the clean function. The clean function
cannot be selected until the self-cleaning side
walls have been installed and the clean function
has been activated in the basic settings. See
the Clean function and Basic settings chapters.
0
Open and close the time function menu
‚
Select the temperature and weight
h
Brief push = rapid heating
Long push = Child lock
±
Brief push = check temperature
Long push = open or close the basic settings
menu
†
Brief push = begin/stop working
Long push = stop working
RQ
RII
VWDUW
VWRS
FOHDQ
&NJ
0
3
&ORFNGLVSOD\
7HPSHUDWXUH
GLVSOD\
7\SHRIKHDWLQJ
LQGLFDWRU
6
Temperature control
The bars on the temperature control indicate the heating
phases or the residual heat inside the oven.
Heating control
The heating control shows the temperature rise in the oven.
When all of the bars are full is the best time to put the food in
the oven.
The bars are not displayed in the grill power and self-cleaning
levels.
The temperature reached may be displayed during heating by
pressing on the
± button . The temperature indicated may vary
slightly from the actual temperature inside the oven as a result
of thermal inertia.
Residual heat
After switching off the appliance, the temperature control will
indicate the residual heat inside the oven. If all of the bars are
full, it means that the oven has reached a temperature of
approx. 270 °C.The display turns off when the temperature falls
below approximately 60 °C.
Inside the oven
There is a light inside the oven. A fan prevents the oven from
overheating.
Light
The oven light remains on while the oven is working. The light
switches off at temperatures of less than 60 ºC and during the
clean function. This ensures optimum precision control.
Fan
The fan can be turned on and off as necessary. The hot air
escapes through the top of the door. Warning! Do not cover the
vent. The oven could overheat.
The fan remains on for a certain length of time after the oven
has been switched off so that it can cool down more quickly.
Your accessories
The accessories supplied with your appliance are suitable for
making many meals. Ensure that you always insert the
accessories into the cooking compartment the right way round.
There is also a selection of optional accessories, with which
you can improve on some of your favourite dishes, or simply to
make working with your oven more convenient.
inserting the accessories
The accessories can be placed inside the oven on 5 different
levels. Always insert them as far as possible so that the
accessories do not touch the door glass.
The accessories can be removed halfway until they are
secured. This makes it easy to remove food.
When inserting an accessory in the oven, make sure the
curvature is at the rear. This is the only way to ensure it fits
perfectly.
Depending on the equipment, if the appliance has guide rails,
these will interlock slightly when fully removed. This means the
accessory can be easily inserted. To unlock, reinsert the guide
rails in the oven exerting slight pressure.
Note: Accessories may deform as they heat up. This
deformation will disappear when they cool. This does not affect
the normal operation.
Your oven is supplied with only some of the following
accessories.
Accessories may be purchased from the Technical Assistance
Service, from specialist retailers or on the Internet. Enter the HZ
number.
VWDUW
VWRS
&NJ
&N
J
VWD
UW
VWR
S
Wire shelf
For cookware, baking tins, roasts,
grilled items and frozen meals.
Insert the wire shelf with the open
end facing the oven door and the
curvature downwards
¾.
Flat enamel oven tray
For cakes, pastries and biscuits.
Place the tray in the oven with its
raised lip facing the door.
Universal deep enamel tray
For juicy cakes, pastries, frozen
meals and large joints for roasting.
This can also be used as a tray to
collect the fat when roasting directly
on the wire shelf.
Place the tray in the oven with its
raised lip facing the door.
7
Special accessories
Accessories may be purchased from the Technical Assistance
Service or from specialist retailers. There is a wide range of
accessories available for the oven in our catalogues and on the
Internet. Ordering online and the availability of special
accessories changes from country to country. Consult your
purchase documentation.
Not all of the special accessories are suitable for all appliances.
When purchasing, always give the exact name (E-Nr.) of your
appliance.
Before the first use
This chapter indicates the steps that must be followed before
using your oven for the first time.
■ Setting the time
■ Heating the oven
■ Cleaning accessories
■ Read safety tips and warnings listed at the beginning of the
instructions. These are very important.
Setting the time
When the appliance is turned on the display panel
shows
‹:‹‹. Set the current time.
1. Press the 0 button.
The time symbol of this indicator has an arrow to the left-hand
side
N0. This proposes ‚ƒ:‹‹.
2. To set the time using the control knob .
3. To confirm time with the 0 button.
The programmed time is displayed after a few seconds.
Note: See the Time functions chapter to change the time.
Heating the oven
To remove the "new" smell, heat the oven empty with the door
closed. The most effective option is to heat the oven for one
hour with the top and bottom heating elements
% set at
240 ºC. Check that no packaging has been left inside the oven.
1. Press the ‡ button.
It is recommended that you use the 3D
: hot air heating
method and a temperature of 160 °C. The
Î control knob
symbol is to the right of the type of heating.
2. Set the type of heating to top and bottom heating using the
control knob
%.
3. Press the ‚ button.
The control knob symbol
Î shows the temperature
indicator.
4. Turn the temperature knob to 240 ºC.
5. Briefly press the † button.
The oven comes on. The
† button lights up.
6. After 60 minutes, turn the oven off using the button ‡ .
The bars on the temperature control indicate the residual heat
inside the oven.
Cleaning the accessories
Before using the accessories for the first time, clean them
thoroughly using a cloth, hot water and a little soap.
Special accessories HZ number Use
Flat enamel oven tray HZ361000 For cakes, pastries and biscuits.
Universal deep enamel tray HZ362000 For juicy pies, pastries, frozen meals and large joints for roast-
ing. This can also be used as a tray to collect the fat when
roasting directly on the wire shelf.
Wire shelf HZ364000 For cookware, baking tins, roasts, items placed directly on a
wire shelf and frozen meals.
Pizza tray HZ317000 Ideal for pizza, frozen foods, or large round cakes. The pizza
tray can be used instead of the universal deep tray. Place the
tray on the wire shelf and follow the indications in the tables.
Glass casserole dish HZ915001 The glass casserole dish is ideal for preparing stews and
foods that need browning in the oven. It is especially suitable
for automatic programmes and automatic roasting.
Triple removable guide rails HZ368300 The triple guide rails at heights 1, 2 and 3 ensure that acces-
sories can be fully removed without them tipping over.
8
Switch the oven on and off
You can switch the oven on and off with the ‡ button.
Switching on
Press the ‡ button.
The 3D
: hot air heating symbol and 160 °C temperature are
shown on the display as recommended values.
This configuration can be started directly or it is possible
■ to program a different type of heating and temperature
■ to select an automatic program with the button X
■ to begin a configuration stored in memory by pressing the
button
l
■ to select the clean function using the button s.
See individual chapters for more information on how to
program the appliance.
Switching off
Press the ‡ button. The oven switches off.
Setting the oven
In this section, you will find information about
■ which types of heating are available in your oven
■ how you set a type of heating and a temperature
■ and how you set rapid heating
Types of heating
This oven has a large range of types of heating. Therefore the
most appropriate preparation method can be selected for each
food type.
Selecting the temperature and type of heating
required
Example in the picture: top and bottom heat % at 180 °C.
Switch on the oven using the
‡ button.
The 3D
: hot air symbol and 160 °C are shown on the
display.
The time is displayed on the time indicator. The control knob
symbol
Î next to the type of heating shows that this value
can be modified with the control knob.
RQ
RII
VWDUW
VWRS
FOHDQ
&NJ
0
3
Type of heating and
temperature range
Use
:
3D hot air
30-270 °C
For cakes and pastries. These can be
baked on three levels. A fan located
on the rear wall of the oven disperses
the heat evenly.
‘
Eco hot air func-
tion*
30-270 °C
To prepare cakes, confectionery, deep
frozen products, roasts and fish on
one level and when preheating is not
required. The fan distributes air evenly
inside the oven to optimise energy
use.
%
Top and bottom
heating
30-270 °C
For cakes, gratin dishes, and lean
meat roasts, e. g., veal or game, on
one level. The heat is provided by the
bottom and top heating elements.
;
Pizza function
30-270 °C
For rapid preparation of frozen foods
without pre-heating, e.g., pizza, chips
or puff pastries. The heat comes from
the bottom element and the fan on the
rear wall.
$
Bottom heating
30-270 °C
For confits, baking and cooking au
gratin. The heat comes from the bot-
tom heating element.
4
Grill with hot air
30-270 °C
For roasting joints of meat, poultry and
fish. The grill heating element and the
fan switch on and off alternately. The
fan circulates the heat generated by
the grill around the food.
* Type of heating used to determine the appliance's energy effi-
ciency rating according to EN60350.
(
Large surface
grill
Grill power 1, 2
or 3
For grilling steaks, sausages, fish and
toasting bread. The entire surface
below the grill element is heated.
*
Grill, small sur-
face area
Grill power 1, 2
or 3
For grilling a small number of steaks
or sausages or small amounts of fish,
and toasting bread. Only the central
area of the grill heating element heats
up.
@
Defrosting
30-60 °C
For defrosting, e.g., meat, poultry,
bread and cakes. The fan circulates
the hot air around the food.
%f
Sabbath mode
85-140 °C
Keeps food warm inside the oven for
a cooking time of between 24 and
73 hours. The heat is provided by the
bottom and top heating elements. See
the Sabbath mode chapter.
Type of heating and
temperature range
Use
* Type of heating used to determine the appliance's energy effi-
ciency rating according to EN60350.
RQ
RII
VWDUW
VWRS
FOHDQ
&NJ
0
3
9
This configuration can be started directly with the button
†.
To program another type of heating and a different
temperature, proceed as follows:
1. Select the desired type of heating using the control knob.
2. Press the ‚ button.
The
Î symbol switches to temperature.
3. Change the recommended temperature using the control
knob.
4. Press the † button.
The oven comes on.
5. When the dish is ready, switch off the oven using the ‡
button.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Calling up the heating temperature
Press the ± button briefly. The current heating temperature in
the cooking compartment is displayed for several seconds.
Pausing operation
Press the
† button briefly. The oven is paused. The † button
flashes. To resume, press the
† button again. The † button
lights up. The programme will then continue.
Cancelling operation
Press and hold the
† button until the : symbol for 3D hot air
and 160 °C appear. You can make new settings.
Setting the cooking time
See section Time-setting options, setting the cooking time.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Setting the rapid heating function
The rapid heating is not compatible with all types of heating.
Compatible types of heating
When the programmed heating type is not compatible with the
rapid heating, a warning signal is given.
Suitable temperatures
The rapid heating does not work when the set temperature is
below 100 ° C. If the oven temperature is slightly less than the
set temperature, rapid heating is not necessary. Not turned on.
Setting the rapid heating function
Press the button
h for rapid heating. The symbol c is
displayed beside the temperature. Start the rapid heating
function.The temperature control bars fill.
The rapid heating function has ended when all the bars are lit.
A brief sound is given and the symbol
c switches off. Put the
food in the oven.
Notes
■ Rapid heating is cancelled by adjusting the type of heating.
■ The duration of the programmed cooking time begins to run,
regardless of the rapid heating.
■ The oven temperature reached may be displayed during
heating by pressing on the button
±.
■ To ensure uniform cooking, the food must not be put into the
oven until rapid heating has been completed.
Cancelling rapid heating
Press the
h button. The symbol goes out.
RQ
RII
FOHDQ
0
3
VWDUW
VWRS
&NJ
VWDUW
VWRS
&NJ
RQ
RII
VWDUW
VWRS
FOHDQ
&NJ
0
3
:
3D hot air
%
Top and bottom heating
;
Pizza function
10
Time functions
The time functions menu is accessed using the button 0. The
following functions are available:
When the oven is off:
■ Q = set the timer
■ 0 = set the time
When the oven is on:
■ Q = set the timer
■ x = set the cooking time
■ y = delay the end time
Setting the time-setting options in brief
1. Press the 0 button repeatedly until the arrow is next to the
required symbol, e.g. set cooking time function =
Nx.
2. Set the desired value with the rotary selector.
3. Press the 0 button repeatedly until the Î rotary symbol
disappears from the clock display.
A detailed description of how to adjust each individual function
is provided below.
Short audible signal
If you cannot change or set a value, you will hear a short
audible signal.
Programming the timer
The timer works independently of the oven.It can be used as a
kitchen timer and programmed at any time.
1. Press the 0 button.
The time function menu opens.The arrow
N is located to the
left of the symbol
Q. The control knob symbol Î on the two
points indicates that the time can be programmed using the
control knob.
2. Set the time for the timer using the control knob.
3. Press the 0 button repeatedly until the control knob
symbol
Î disappears from the time indicator.
The time indicator shows the time elapsed from the set time.
When the time has elapsed
A signal sounds. The time on the timer has reached
‹:‹‹.
Press the
0 button. The display goes out.
Cancelling the timer time
Press the
0 button to open the menu. Turn the timer time back
to
‹:‹‹. Press the 0 button repeatedly until the Î rotary
symbol disappears from the clock display.
Changing the timer time
Open the menu with the
0 button and use the rotary selector
to change the time. Press the
0 button repeatedly until the Î
rotary symbol disappears from the clock display. The menu is
exited. The new time counts down.
Setting the cooking time
When a duration (cooking time) is programmed for a dish, the
oven stops automatically when this time has elapsed. The oven
will stop heating.
Prerequisite: a heating type and temperature must be set.
Example in the picture: top and bottom heat configuration
%,
180 °C, cooking time 45 minutes
1. Press the 0 button twice.
The arrow is located in front of the cooking time symbol
Nx.
The control knob symbol
Î on the two points indicates that
the time can be programmed using the control knob.
2. To set the time using the control knob.
3. Press the button 0 repeatedly until the control knob
symbol
Î disappears from the time indicator.
The configuration is applied.
4. If the oven has not been started, press the button †.
The time indicator shows the time elapsed of the set time.
The cooking time has elapsed
A signal sounds. The oven stops heating. ‹:‹‹ is shown on
the clock display. You can cancel the audible signal earlier by
pressing the
0 button.
To cancel a cooking time
Using the button
0, adjust the cooking time Nx. To reset the
cooking time to
‹:‹‹ using the control knob. Press the 0
button repeatedly until the control knob symbol
Î disappears
from the time indicator.
Adjusting the cooking time
Using the
0 button, adjust the cooking time Nx. Change the
cooking time using the control knob.Press the
0 button
repeatedly until the control knob
Î symbol disappears from
the time indicator. The time elapsed of the changed time is
displayed.
Calling up the clock, cooking time and end time
You can call up all the functions with the
0 clock button.
RQ
RII
VWDUW
VWRS
&NJ
0
3
FOHDQ
VWDUW
VWRS
&NJ
11
Delaying the end time
The end time can be delayed by:
■ for all types of heating
■ many programs,
■ The Clean function
Example: the dish is put in the oven at 9:30 a.m. 45 minutes of
cooking are required; so, it will be ready at 10:15 a.m.
However, you wish cooking to end at 12:45 p.m.
Change the end cooking time from 10:15 a.m. to 12:45 p.m.
The oven will begin working at 12:00 p.m. and finish working at
12:45 p.m.
This function is also compatible with cleaning. Cleaning can be
programmed at night so the oven is available during the day.
Please note that perishable food should not be left for too long
in the oven.
Delaying the end of the cooking time
Prerequisite: a cooking time must have already been
programmed. The oven must not be working.
1. Using the button 0, select the end cooking time Ny.
The end time will be displayed. The dish will be ready at this
time
2. Change the end time using the control knob.
3. Press the button 0 repeatedly until the control knob
symbol
Î disappears from the time indicator.
4. Press the † button.
The oven is set to standby. The button
† lights. The set time is
displayed in the time indicator. When the oven starts working,
the time elapsed is displayed.
The cooking time has elapsed
A signal sounds. The oven stops heating.
‹:‹‹ is shown on the
clock display. You can stop the audible signal by pressing
the
0 button.
Correcting the end time
This is only possible as long as the oven is in standby. Use
the
0 button to select the Ny end time. Adjust the end time
using the rotary selector. Press the
0 button repeatedly until
the
Î rotary symbol disappears from the clock display. The
new end time is applied.
Setting the clock
The oven must be switched off before you can set or change
the clock.
Following a power cut
After a power cut the display panel shows
‹:‹‹ and the
symbol
0. Set the current time.
1. Press the 0 button.
The arrow is in front of the hour symbol
N0.‚ƒ:‹‹ is shown
on the display panel.
2. Set the current time using the control knob.
3. Press the 0 button.
The menu closes. The actual time is displayed on the display
panel.
Changing the clock
If you wish to change the time from summer to winter time, for
example, press the
0 button twice. The arrow is next to
the
N0 symbol for the clock. Then proceed as described in
points 2 and 3.
Hiding the clock
You can hide the clock. Then it will only appear when the oven
is switched on. For more information, refer to the Basic settings
section.
Memory
The memory can be used to save custom settings for a recipe
and access them at any time.
The memory function is especially useful when preparing the
same recipe frequently.
Saving configurations to memory
The clean function cannot be saved.
1. Set the type of heating, temperature and even the specific
cooking time for different foods. Do not start yet. To store a
cooking program, select the program and adjust the weight.
Do not start yet.
2. Hold in the button l until the signal sounds and the button
lights.
The configuration is saved and can begin at any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Using the memory
The settings saved for a specific food can be used at any time.
1. Briefly press the l button.
The saved settings are displayed.
2. Press the † button.
The memory configuration starts.
Changing the settings
This can be done at any time. The setting you originally saved
appears the next time you start the memory.
RQ
RII
VWDUW
VWRS
FOHDQ
&NJ
0
3
VWDUW
VWRS
&NJ
12
Sabbath mode
With this setting, the oven maintains upper and lower heat at a
temperature of between 85 ° C and 140 ° C. This can be
programmed for between 24 and 73 hours.
During this time, keep food hot inside the oven without turning it
on or off.
Starting the Sabbath mode
Prerequisite: check the basic settings for "Sabbath mode, yes".
See the Basic settings chapter.
1. Switch on the oven using the ‡ button.
The 3D
: hot air symbol and 160 °C are shown on the
display.
2. Select Sabbath %f mode using the control knob.
3. Switch to temperature using the button ‚ and program
this using the control knob.
4. Press the 0 button twice. The arrow is located in front of the
symbol for the duration
Àz.
27:00 hours is displayed.
5. Set the cooking time using the control knob.
6. Press the button 0 repeatedly until the control knob
symbol
Î disappears from the time indicator.
7. Press the † button.
Sabbath mode starts.
The cooking time has elapsed
The oven stops heating.
Setting a later end time
It is not possible to set a later end time.
Cancelling Sabbath mode
Press and hold the
† button until 3D hot air:, 160 °C
appears. You can make new settings.
Childproof lock
The oven is equipped with a childproof lock to prevent it being
turned on or reset accidentally.
Activating the childproof lock
Hold in the button
h until the symbol @ is displayed. Wait
approximately 4 seconds.
The settings can no longer be changed. The control panel is
locked.
Switching the locking system off
Press the button
h until the symbol @ appears. You can now
begin programming again.
Note: Even when the childproof lock is activated the oven may
be turned off using the button ‡ or holding in the button †, the
timer may be adjusted or the warning beep may be turned off.
Basic settings
This oven has different basic settings that can be adapted at
any time to your needs.
Note: The table specifies all the basic settings and selection
options. The screen only displays the basic settings compatible
with the apparatus according to its equipment.
Function Basic setting Options
™‚
Duration of signal after the cooking time or the time
set on the timer has elapsed
ƒ= 2 minutes ‚ = 10 seconds
ƒ = 2 minutes
„ = 5 minutes
™ƒ
Key confirmation sound
‹ = off ‹ = off*
‚ = on
*Exception: Whenever the appliance is
turned on or turned off, there is a confir-
mation sound.
™„
Display brightness
ƒ = medium ‚ = night-time
ƒ = medium
„ = daytime
™…
Time indicator when the oven is switched off
‚ = on ‹ = off*
* The time is displayed while the residual
heat is displayed.
‚ = on
13
Changing the basic settings
Prerequisite: The oven must be switched off.
Please read the basic settings table to understand each setting.
Example in the picture: modifying the basic settings of the
operation of the short half-fan.
1. Hold down the button ± for approx. 4 seconds until ™‚ is
displayed for the first basic setting and the number
ƒ
corresponding to the preset value.
2. Repeatedly press the ± button to get to the required basic
settings.
3. Change the basic setting using the control knob.
4. Now, other basic settings can be changed as described in
points 2 and 3.
5. Hold down the button ± until the indicator turns off. Wait for
approximately 4 seconds. All changes are saved
Cancelling
Press the
‡ button. The changes are not applied.
Automatic shut off
This oven has an automatic shut-off function. This function is
activated when no cooking time has been specified and the
configuration has not changed for a long time. This depends on
the temperature or grill power selected.
Automatic shut-off activated
The display panel turns on ‰”. The oven will pause operation.
Press any key to turn off the indicator. You can now begin
programming again.
Note: If a cooking time has been set, the oven stops heating
when this time has elapsed. The automatic shut-off is not
required.
™†
Oven light on
‚ = activated ‹ = deactivated
‚ = activated
™‡
Resume operation after closing the oven door
‚ = function deactivated ‹ = function deactivated
‚ = function deactivated
™‰
Time that the fan runs
ƒ = medium ‚ = short
ƒ = medium
„ = long
… = very long
™Š
Self-cleaning top plate and side plates retrofitted
‹ = no ‹ = no
‚ = yes
™‚‹
The shelf support rails have been refitted.
‹ = no ‹ = no
‚ = yes
™‚‚
Undo all changes and reset the basic settings
‹ = no ‹ = no
‚ = yes
™‚ƒ
Sabbath mode
‹ = no ‹ = no
‚ = yes
Function Basic setting Options
RQ
RII
VWDUW
VWRS
FOHDQ
&NJ
0
3
RQ
RII
VWDUW
VWRS
FOHDQ
&NJ
0
3
RQ
RII
VWDUW
VWRS
FOHDQ
&NJ
0
3
14
Cleaning function
The cleaning function regenerates the self-cleaning surfaces
inside the oven.
The inside rear and side walls and ceiling of some ovens may
be lined with a highly porous ceramic lining. This lining absorbs
splashes produced during baking and roasting, dissolving them
while the oven is on. This cleaning system makes it possible to
regenerate self-cleaning surfaces that can not properly clean
themselves.
As an option, self-cleaning side walls can be purchased as
special accessories from the Technical Assistance Service, by
quoting part number 680828 and 680829.
The clean function can be used when the oven is equipped with
a self-cleaning back wall and self-cleaning side walls. This
function intensifies the regeneration process for the self-
cleaning walls.
Changing the basic settings
Once the side walls have been installed, activate the clean
function using the basic settings. See the Basic settings
chapter to find out how to do this.
Cleaning levels
There are three cleaning levels available.
Before cleaning
Remove all pans and unsuitable accessories from inside the
oven.
Cleaning the oven's base and enamelled walls
Before programming the clean function, clean the surfaces
inside the oven that are not self-cleaning. Otherwise, stains will
appear that are impossible to remove.
Use a cleaning cloth and hot water with a little soap or vinegar.
If very dirty, use a fine steel scourer or a special oven cleaning
product. These must only be used when the oven interior is
cold. Do not use metal scourers or special oven cleaning
products on self-cleaning surfaces.
Setting the cleaning level
1. Press the s button.
The cleaning level 3 is displayed.
If you wish to change the cleaning level:
2. Select the cleaning level with the control knob.
3. Begin cleaning by pressing †.
Once cleaning has finished
‹:‹‹ appears in the display. The oven stops heating.
Cancelling cleaning
Press and hold the
† button until : 3D hot air, 160 °C
appears. You can make new settings.
Adjusting the cleaning level
Once cleaning starts, the cleaning level can no longer be
changed.
Setting cleaning to run overnight
So that you can use your oven throughout the day, delay the
end of the cleaning process to during the night. See the Time-
setting options section, setting a later end time.
After cleaning
Once the inside of the oven has cooled, clean the ash remains
from the self-cleaning surfaces using a damp cloth.
Care and cleaning
If cleaned and properly cared for, your oven will keep its bright
appearance and operating performance for many years to
come. Advice on how to care for and clean your oven is
provided below.
Notes
■ Different colours may be seen in your front panel due to the
various materials used in its manufacture, such as glass,
plastic and metal.
■ Dark patches in the door's glass panel may seem to be dirt
but they are in fact reflections from the oven light.
■ Enamel burns at very high temperatures. This may cause
slight discolouration. This is normal and does not affect the
oven's operation. The edges of thin baking trays may not be
completely enamelled. They may therefore feel slightly rough,
although their corrosive protection will be unaffected.
Cleaning products
Follow the indications provided in the table to avoid damaging
the various oven surfaces by using unsuitable cleaning
products. Do not use
■ abrasive or acidic cleaning products
■ strong products containing alcohol
■ scourers or hard sponges
■ high-pressure or steam cleaners
Wash new dishcloths thoroughly before use.
Level Cleaning level Duration
‚
mild approx. 45 minutes
ƒ
medium approx. 1 hour
„
intense approx. 1 hour, 15 minutes
15
Cleaning the self cleaning surfaces in the oven interior
The inside rear and side walls and ceiling of some ovens may
be lined with a highly porous ceramic lining. This lining absorbs
splashes produced during baking and roasting, dissolving them
while the oven is on. This cleaning will be most effective at
higher temperatures and during longer cooking times.
If the "self-cleaning side walls" are purchased as an optional
accessory at a later date, the self-cleaning surfaces can be
regenerated using the clean function. See the Clean function
chapter.
Slight discolouration of the lining does not affect its self-
cleaning performance.
Caution!
■ Do not use abrasive cleaning products. These would scratch
and impair the highly porous lining.
■ Never use oven cleaning products on ceramics. If oven
cleaner is spilled on this accidentally, immediately remove it
using lots of water and a sponge.
Cleaning the oven's enamelled bottom and walls
Use a cleaning cloth and hot water with a little soap or vinegar.
If very dirty, use a fine steel scourer or a special oven cleaning
product. These must only be used when the oven interior is
cold. Do not use metal scourers or special oven cleaning
products on self-cleaning surfaces.
Removing the grill heating element
The grill heating element can be removed in some ovens to
facilitate cleaning.
: Risk of burns.!
The oven must be cold.
1. Pull the grill element handle towards you and push it upwards
until you hear it click into position (figure A).
2. At the same time, hold the grill element and swing it down
(figure B).
After cleaning, push the grill heating element up again. Push
the locking handle down and secure the grill element.
Removing and refitting the wire shelves or left
and right hand side rails
The wire shelves or left and right hand side rails can be
removed for cleaning. The oven must be cold.
Release the guides or rails
1. Lift the front of the guide or rail and release it (figure A).
2. Then pull the guide or rail forwards completely and remove it
(figure B).
Clean the guides or rails with detergents and a sponge. The
use of a brush is recommended for stubborn stains.
Install the wire shelves or rails
1. First insert the shelf or the rail in the rear groove by pushing it
back slightly (figure A)
2. then insert it in the front groove (figure B).
Wire shelves or rails can be adjusted on the left and right hand
side. Their curvature should always be face down.
Zone Cleaning products
Front panel Hot water and a little soap:
Clean with a dishcloth and dry with a soft
cloth. Do not use a glass cleaning prod-
uct or a glass scraper.
Stainless steel Hot water and a little soap:
Clean with a dishcloth and dry with a soft
cloth. Immediately remove any water
marks, grease, cornflower or egg white
stains since corrosion could occur
underneath these marks or stains.
Special products for the care of stainless
steel and which are suitable for hot sur-
faces may be obtained from Technical
Assistance Service centres and special-
ist retail outlets. Use a very fine soft cloth
to apply the cleaning product.
Glass panel Glass cleaning products:
Clean using a soft cloth. Do not use a
glass scraper.
Display Glass cleaning products:
Clean using a soft cloth. Do not use alco-
hol, vinegar or other abrasive or acidic
cleaning products.
Glass panels on
oven door
Glass cleaning products:
Clean using a soft cloth. Do not use a
glass scraper.
Glass cover for the
oven light
Hot water and a little soap:
Clean with a dishcloth.
The seal
Do not remove!
Hot water and a little soap:
Clean with a dishcloth. Do not rub.
Wire shelves or rails Hot water and a little soap:
Soak and clean using a dishcloth or
brush.
Sliding guides Hot water and a little soap:
Clean with a dishcloth or a brush. Do not
leave this to soak or wash in a dish-
washer.
Accessories Hot water and a little soap:
Soak and clean using a dishcloth or
brush.
%$
%
$
%
$
16
Unhooking and hanging the oven door
The front panel can be unhooked to help remove the oven door
and clean the glass panels.
The oven door hinges are fitted with a locking lever. The door
cannot be unhooked if the locking lever is closed (figure A).
Once the locking lever has been opened to unhook the door
(figure B), the hinges will be locked in position. This prevents
the door from suddenly closing.
: Risk of injuries.!
The hinges may close suddenly if they are not locked in
position by the lever. Note that the locking levers are always
closed, apart from when unhooking the door, when the levers
must be open.
Unhooking the door
1. Fully open the oven door.
2. Remove both locking levers located on the right and left hand
sides (figure A).
3. Fully close the oven door as far as possible (figure B). Grip
the left and right hand sides of the door with both hands.
Close the door slightly more and remove it.
Hanging the door
Rehang the door by following the same steps but in reverse
order.
1. When refitting the door, check that both hinges are
positioned exactly inside their respective openings (picture
A).
2. The bottom groove of the hinges must fit snugly on both
sides.
The door may be left crooked if the hinges are not mounted
properly.
3. Reclose the attachment levers (picture C). Close the oven
door.
: Risk of injuries.!
Do not touch the hinges; the door might accidentally fall or a
hinge might suddenly close. Notify the Technical Assistance
Service.
Removing and installing the door panels
To facilitate cleaning, you can remove the glass panels from the
oven door.
Dismantling
1. Unhook the oven door and place it on a cloth with its handle
pointing downwards.
2. Remove the upper cover from the oven door. To do this,
press with your fingers on the tabs on the left and right
(Figure A).
3. Lift and remove the top glass panel (Figure B).
In doors with three glass panels, the following step will also be
necessary:
4. Lift and remove the glass panel (Figure C).
Clean the glass panels using a glass cleaning product and a
soft cloth.
Do not use abrasive or corrosive cleaning products, glass
scrapers or hard metal scourers as these could damage the
glass.
: Risk of injury!
Scratched glass in the appliance door may develop into a
crack. Do not use a glass scraper, sharp or abrasive cleaning
aids or detergents.
%$
%$
%
$
&
%$
&
17
Installing
Follow steps 2 to 4 with doors that have two glass panels.
When installing, ensure that the "right above" inscription on the
lower left part is inverted.
1. Insert the glass panel by tilting it backwards (Figure A).
2. Insert the upper glass panel on both mounts by tilting it
backwards. Ensure that its smooth surface is facing
outwards. (Figure B)
3. Fit and tighten the cover.
4. Refit the oven door.
Once the glass panels have been correctly fitted, the oven is
ready to use.
Troubleshooting
Quite often, when there is a malfunction, it is usually a small
irregularity which is easy to rectify. Before contacting the
Technical Assistance Service, try to determine the cause of the
fault using the following table.
Troubleshooting table
Error messages
When the display panel shows an error message with
“, press
the
0 button. The message will disappear. The set time
function will be deleted. If the error message does not
disappear, call the Technical Assistance Service.
The following error messages can be solved by the user.
: Risk of electric shock.!
Incorrect repairs can be dangerous. Repairs may only be
carried out by qualified personnel from the Technical
Assistance Service.
%
$
Fault Possible cause Solution/advice
The oven does not work. The fuse has blown. Check the condition of the fuse in the fuse box.
The display panel shows
‹:‹‹
Power cut. Set the time once more.
The oven does not heat or it is not possi-
ble to set the selected type of heating.
The heating type is not recog-
nised.
Reprogram.
The oven does not heat up. The tempera-
ture display shows a small frame.
The oven is in demo mode. Disconnect the fuse in the fuse box and connect it
again after at least 20 seconds. Within the next
2 minutes, hold the button
h in for 4 seconds until
the indicator no longer displays the square.
After pushing the button
s, the display
panel displays
Ÿ©
The side walls inside the oven are
not self-cleaning. The clean func-
tion cannot be used.
The clean function can only be programmed with
the button
s if the appliance is equipped with
self-cleaning side walls and the clean function is
activated in the basic settings. See the Clean func-
tion and Basic settings chapters.
The display shows
”‰.
The automatic shut off function is
activated.The oven will stop heat-
ing.
Press any button.
Error message Possible cause Solution/advice
“‹‚‚
A button has
been pressed
for too long or
has got stuck.
Press all of the buttons one
by one. Check if any button
is stuck, covered or dirty.
18
Changing the oven bulb
If the oven light bulb is damaged it must be replaced. Special
25 W, E14, 220 V-240 V heat-resistant light bulbs (to 300 ºC
temperature) can be obtained from the Technical Support
Service or in specialist shops. Only use this type of bulb.
: Risk of electrical discharge and the resulting shock.!
Disconnect the appliance from the mains. Ensure that this is
turned off.
1. Place a dishcloth into the cold oven to avoid damage.
2. Remove the glass protection by unscrewing it to the left.
3. Replace the bulb with a similar bulb.
4. Screw the protection glass back into place.
5. Remove the dishcloth and switch the oven back on at the
mains.
Protective glass panels
Damaged protective glass panels must be replaced. Protective
glass panels cay be obtained from the Technical Assistance
Service. Please quote your appliance's product number and
production number.
After-sales service
Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
E number and FD number
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate containing these numbers
can be found on the right-hand side of the oven door. You can
make a note of the numbers of your appliance and the
telephone number of the after-sales service in the space below
to save time should it be required.
Please note that there will be a fee for a visit by a service
technician in the event of a malfunction, even during the
warranty period.
Please find the contact data of all countries in the enclosed
customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You can
therefore be sure that the repair is carried out by trained service
technicians who carry original spare parts for your appliances.
Energy and environment tips
Here you can find tips on how to save energy when baking and
roasting and how to dispose of your appliance properly.
Environmentally-friendly disposal of waste
Dispose of packaging with the environment in mind.
Saving energy
■ Preheat the oven only if this is required by a recipe or is
indicated in the tables.
■ Use dark, lacquered or black enamel baking tins. These are
more efficient at absorbing heat.
■ Keep the oven door closed during cooking, baking and
roasting cycles.
■ When baking several cakes, these should be preferably
baked one after the other. The oven will still be hot, thereby
reducing the cooking time for the second cake. Two
rectangular baking tins can be placed side-by-side.
■ For long cooking times, the oven may be turned off
10 minutes prior to the specified time, allowing the item to
continue to cook but taking advantage of the oven's residual
heat.
E no.
FD no.
After-sales service
O
GB 0844 8928999
Calls from a BT landline will be charged at up to
3 pence per minute. A call set-up fee of up to 6 pence
may apply.
IE 01450 2655
0.03 € per minute at peak. Off peak 0.0088 € per
minute.
This appliance is identified according to the Waste
Electrical and Electronic Equipment Directive WEEE
2002/96/EC. This directive defines the framework for
the recycling and reuse of appliances used in EU
territory.
19
Eco hot air function
Using the eco ‘ hot air function, significant energy savings
can be made cooking dishes on one level. The cooking, baking
and roasting cycles do not require preheating.
Notes
■ So that the energy-saving function works efficiently, the dish
should be placed in a cold and empty oven.
■ During the roasting cycle, the oven door should only be
opened whenever really necessary, for example, to turn food
over. In the chapter “Tables and suggestions“, there are
advice and suggestions on baking and roasting.
Table
The following table shows the selection of dishes suitable for
the energy-saving function. The table gives details of suitable
temperature settings, accessories and heights for each dish.
The temperature and the cooking time can change depending
on quantity, condition and the quality of food. Thus, the values
given in the table are approximate. We recommend beginning
with the lowest value. Items will be more evenly browned at a
lower temperature. If the result is not as expected, use a higher
temperature setting next time.
Type of heating =
‘ Hot air eco
Accessory Level Temperature
in °C
Cooking
time, minutes
Cakes and confectionery
Easy sponge cake wire shelf + rectangular baking tin 2 170-180 55-65
Butter sponge cake wire shelf + rectangular baking tin 2 150-160 75-85
Tart base flat oven tray 3 180-200 30-45
Fruit tart, ( ex. cherry) metal springform tin, Ø 26 cm 2 160-180 50-60
Flat yeast cake flat oven tray 3 160-170 30-40
Marble cake wire shelf + rectangular baking tin 2 160-170 100-110
Savoy cake wire shelf + baking tin 2 150-160 85-95
Water sponge cake wire shelf + black enamel baking tin 2 165-175 35-45
Traditional Spanish sponge cake, 3 eggs wire shelf + black enamel baking tin 1 160-170 45-55
Apple tart universal deep tray 3 170-180 65-75
Pastries and biscuits flat oven tray 3 130-140 20-30
Nut triangles flat oven tray 3 185-195 35-45
Butter buns (12 buns) flat oven tray 3 170-180 20-25
Swiss roll flat oven tray 3 160-170 15-20
Fairy cakes flat oven tray 3 150-160 30-40
Apple tart, in circular tin metal tin, Ø 31 cm 3 230-250 30-40
Quiche metal tin, Ø 31 cm 3 200-220 55-65
French sponge cake with fruit rectangular tin 2 180-200 50-60
Apricot puff pastries flat oven tray 3 190-200 30-40
Chocolate chip cookies flat oven tray 3 140-150 35-45
Butter cookies flat oven tray 3 140-150 30-45
Cream-filled pastries universal deep tray 3 210-220 40-50
Puff pastry twists flat oven tray 3 210-230 35-45
Bread (1 kg) flat oven tray 3 200-210 55-65
Meat
Roast veal (1.5 kg of veal) wire shelf + closed pan 2 200-210 110-120
Roast pork (1 kg) wire shelf + open pan 2 180-190 110-120
Veal sirloin / roast beef, rare (1 kg) wire shelf + open pan 2 240-250 35-45
Veal sirloin / roast beef, medium (1 kg) wire shelf + open pan 2 250-260 45-55
Fish
Baked gilthead bream / sea bass (2 pieces, 350 g
each)
universal deep tray 2 180-190 30-40
Gilthead bream in a salt crust (2 pieces, 450 g each) flat oven tray 3 180-190 40-50
Hake (1 piece, 1 kg) flat oven tray 2 180-190 50-60
Trout (2 pieces, 300 g each) flat oven tray 2 180-190 25-35
Monkfish (2 pieces, 400 g each) flat oven tray 2 180-190 30-40
Frozen ready-meal
Thin base frozen pizza wire shelf 2 210-220 15-20
Thick base pizza wire shelf 2 180-190 25-35
Chips for baking flat oven tray 3 210-220 20-30
Chicken wings flat oven tray 3 200-210 15-25
20
Automatic programme
The automatic program is perfect for easily cooking special
recipes, refined stews and juicy roasts. There is no need to turn
and add water to meat and this also keeps the oven clean.
The result of cooking depends on the quality of the meat and
the size of the cookware. Use oven gloves to remove the dish
from the oven when it is ready.The cookware will be very hot.
When opening the cookware, hot vapour escapes.
Ovenware
For the recipes, note the ovenware information given in the
enclosed recipe booklet. For all other programmes, use a
closed dish with a tightly fitting lid. Also observe the information
from the ovenware manufacturer. You will find information on
the other programmes in the following.
Suitable cookware
We recommend heat-resistant cookware (up to 300 °C) made
from glass or glass ceramic. Roasting dishes made from
stainless steel are not ideal. Their shiny surface reflects a high
proportion of the thermal radiation. The food will not brown as
much and the meat will be less well cooked. If you use a
stainless-steel roasting dish, remove the lid once the
programme has finished. Grill the meat at grill setting 3 for 8 to
10 minutes more. The dish browns more quickly if you use a
roasting dish made of enamelled steel, cast iron or diecast
aluminium. Add a little more liquid.
Unsuitable pans
Bake ware made from clay, aluminium foil, clear containers,
without enamel and made from plastic or with plastic handles.
Size of the ovenware
The meat should cover about two thirds of the ovenware base.
This will ensure that you get good meat juices.
The distance between the meat and the lid must be at least
3 cm. The meat may expand during the roasting process.
Preparing the dish
Prepare the recipes according to the information in the recipe
booklet. For all other programmes, use fresh or frozen meat.
We recommend fresh chilled meat.
Select a suitable roasting dish.
Weigh the fresh or frozen meat, poultry or fish. You will find
detailed information in the corresponding tables. You need the
weight in order to make the setting.
Season the meat. Season frozen meat in the same way as fresh
meat.
Many dishes require the addition of liquid. If this is the case,
add enough liquid so that there is approx. ½ cm covering the
base of the dish. If the table specifies “a little” liquid, 2-
3 tablespoons are usually sufficient. If it specifies "a generous
amount" of liquid, add more by all means. Observe the
instructions given before and in the tables.
Cover the ovenware with a lid. Place it on the wire rack at
level 2.
For some dishes, it is not possible to set a later end time.
These dishes are marked with an asterisk *.
Always place the ovenware into the cooking compartment
without preheating it.
Programmes
Recipes
There is a recipe booklet for the first 14 programmes. This
gives precise instructions on each dish.
Fish fingers flat oven tray 3 210-220 20-30
Pre-cooked bread universal deep tray 3 180-200 10-20
Mini filled puff pastries flat oven tray 3 180-190 15-25
Frozen lasagne (450 g) wire shelf 2 210-230 45-55
Lasagne (2 pieces, 450 g each) wire shelf 2 210-230 45-55
Mozzarella sticks flat oven tray 2 230-240 15-25
Jalapeño peppers flat oven tray 3 200-210 15-25
Other
Potatoes au gratin wire shelf + open pan 2 155-165 75-85
Fresh lasagne wire shelf + open pan 2 175-180 50-60
Accessory Level Temperature
in °C
Cooking
time, minutes
Programmes Programme number Weight range in kg Weight setting
Recipes
Aubergine gratin P1* 0.2-0.8 Weight of vegetables
Escalivada P2* 0.8-1.6 Weight of vegetables
Baked tomatoes with egg P3* 0.7-2.0 Weight of vegetables
Seabream P4* 0.5-2.1 Weight of fish
Salted gilthead seabream P5* 0.3-1.1 Weight of fish
Hake P6* 0.5-2.0 Weight of fish
Spare ribs P7* 0.8-2.0 Weight of meat
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
Siemens Electric Built-In Oven User manual
- Category
- Ovens
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Siemens HB65AR520S/70 User manual
-
-
-
-
-
-
-
Siemens HB22AB520R/46 Owner's manual
-
Siemens HB20AB540/03 User manual
-
Other documents
-
Bosch HBG76S651E/45 User manual
-
IKEA LAGAN User manual
-
Bosch HBG41R450E/46 User manual
-
-
Hotpoint SC88X User manual
-
Whirlpool AKZ 196 WH Program Chart
-
-
-
-