TEXET FXMNK8600 Owner's manual

Brand: TEXET

Model: FXMNK8600

Type: Owner's manual

105 x285mm

To reduce the risk of fire or burns do not open, crush, puncture, short

external contacts, expose to fire or explosion.

Do not modify, remanufacture or attempt to insert foreign objects into

the charger.

Do not immerse or expose to water or any other liquids or hazards.

Keep the charger dry at all times. Precipitation, humidity and all types

of liquids or moisture can contain minerals that will corrode electronic

circuits/components.

Do not use or store the charger in dusty or dirty areas.

Do not use or store in hot areas. High temperatures can shorten the life

of the electronic device, warp or melt the plastic.

Do not use or store in cold areas. When the charger is used moisture

will form inside which may damage the electronic circuit board.

Do not use harsh chemicals, cleaning solvents or strong detergents to

clean the charger.

Charger Warnings - To reduce the risk of personal injury, electric

shock, fire or damage to the Charger.

Plug the charger into an electrical outlet that is easily accessible at all

times.

Disconnect power from the equipment/device by unplugging the charger

from the electrical outlet or by unplugging the charging cable.

Do not place anything on the charger or any of the charging cables.

There should be no interference with the charger or cables at any time.

Arrange the cable and charger so that no one can accidentally step on

or trip over them.

When unplugging the charger from the electrical outlet, pull the plug

and not the charger cable.

Using any other external power source can damage your device and

void your warranty.

In the unlikely event that the charger is not working do not attempt to

open/repair the charger. Non- expert handling may cause injury

and/or electric shock.

The Charger is compatible with most devices that require a Micro USB

Cable for charging. Mobile/Smart phones, Tablets, eBook Readers,

Cameras and many more devices.

The Charger also has a USB port so is compatible with iPhones, iPads,

iPad Mini, and iPods, (USB to 8 Pin and 30 Pin Cables not supplied).

All devices have different battery capacities so some devices will take

longer to charge than others. The output for the USB Mains Charger is

1A, (1000mAh), so if the battery capacity of the device you are charging

is 3000mAh it will take approx. 3.5-4.5 hours to charge. To find out the

battery capacity of your device, either check the battery itself or check

the Instruction Manual, (the information on the battery can normally be

found in the Technical Specification part of the Manual).

Made in China www.texet.com

General Safety Warnings

Texet is a registered trademark of The Hira Company Ltd.

Customer Services Helpline:+44(0) 161 214 0700

email: [email protected]

Thank you for purchasing the TEXET Micro USB Mains Charger,FXMNK8600,

with normal use your Mains Charger will provide years of satisfactory performance.

Please read the instruction manual carefully and retain for future reference.

Instruction Manual

Micro USB Mains Charger–FXMNK8600

TEXET FXMNK8600 Owner's manual

TEXET FXMNK8600 Owner's manual

TEXET FXMNK8600 Owner's manual

Related papers

Other documents