McIntosh RS200 Quick start guide

Brand: McIntosh

Model: RS200

Type: Quick start guide

RS200 Quickstart Guide

is Quick Start Guide will get music owing quickly with a Bluetooth connection

to your RS200. is way you can have some music playing while you explore the

RS200’s Owner’s Manual. Connecting to Wi-Fi, the Play-Fi app, HDMI, AirPlay and

more is explained starting on page four of the Owner’s Manual.

Power Up

• Connect AC Power to the Rear of the

RS200.

• Switch the Main Power Switch to the On (

)

position.

• Press and release the Right Knob on the

front of the RS200. e RS200 will power

on. When meter backlights turn on and the

red LED below the Right Knob turns o,

the unit is ready.

Pairing Mode

• Press and hold the Le Knob for two

seconds and then release.

• “BT” will blink above the Le Knob. e

RS200 is in Bluetooth Pairing Mode.

• On the phone (or other device) you wish

to connect, press SCAN in the Bluetooth

section of Settings. Generally, this is found

in the Connections’ submenu of settings

(devices may vary).

• Select “RS200 XXXX” to pair. (See gure

Below.) Answer “OK” or “Yes” if asked to

Pair.

Play

e RS200 is now connected for Audio to your

device. You can control the Volume of your

RS200 with your connected device.

Enjoy

Connect

AC Power

Main

Power Switch

McIntosh part number 241XXX

RS200 ready

to Pair

McIntosh RS200 Quick start guide

McIntosh RS200 Quick start guide

McIntosh RS200 Quick start guide

Related papers

Other documents