Altec inAir5000 Quick Connect Manual

Brand: Altec

Model: inAir5000

Type: Quick Connect Manual

™

Quick Connect Guide

inAir-Setup over wireless network

A14501 R04

• Please wait 20-30 seconds for the

inAir 5000 to power on. The LED

will begin to ﬂ ash purple.

• Launch the app.

• Press SETUP.

• Give your inAir 5000 a name.

• Press NEXT.

• You will receive a conﬁ rmation that

you have successfully named your

inAir 5000.

• Press NEXT.

• Choose your Wi-Fi network.

• Enter the password if needed.

• Press NEXT.

• Enter your email address so that we can

inform you about ﬁ rmware updates

• The ‘Send me info’ slider lets

you opt-in to upcoming info about

Altec Lansing products and promotions.

• Congratulations. Your inAir 5000 is now

ready to stream music wirelessly!

• You can now disconnect the USB cable and

exit the app.

Connecting

On / Connected

Access Point Mode

Applying Update

No Network Detected

Firmware Error

The inAir 5000 LED is a helpful tool. Here’s what it means:

Color Meaning

• Launch iTunes or play music from

your iOS device.

• Look for the AirPlay icon

select your inAir 5000.

• ENJOY!

iPad, iPhone, iPod touch, iTunes and iOS are trademarks of Apple Inc.

App Store is a service mark of Apple Inc.

Before we begin.

• You need a Wi-Fi network in your home.

• A current iOS device running iOS

4.2 or later. (iPad,

iPhone

or iPod

touch)

• Download and install the inAir Guide app for your iOS device.

• Have your Wi-Fi network name and password ready for reference.

• The contents of your inAir 5000 package should be handy.

• If you don’t have an iOS device, see other side for Wi-Fi setup.

Connect your devices.

• Attach your iOS device to the inAir 5000 with your USB cable.

• Connect your inAir 5000 to power with the supplied AC adapter.

• Power on your device.

4 6 8

Flashing Blue

Blue

Flashing Orange

Flashing Green

Flashing Purple

Flashing Red

Setting up your inAir 5000 remote.

• In iTunes, go to preferences and select ‘devices’.

• Select the check box for ‘allow iTunes audio control from

remote speakers’.

• Look for the AirPlay icon

at the bottom right of iTunes,

click and select your inAir 5000.

Start playing music!

For additional information, please visit:

support.alteclansing.com

• Launch your

browser and go to

http://192.168.1.12

• You will see the

“inAir-Setup”

home page.

• Name successfully

changed.

• Enter a name for your

device

• Press APPLY.

• Choose your home

network, enter your

password.

• Press JOIN.

• Launch iTunes or play

music from your iOS

device.

• Look for the AirPlay icon

at the bottom right of

your iTunes window.

• Please check support.

alteclansing.com for

current updates.

™

Quick Connect Guide

inAir Guide app for your iPad,

iPhone,

and iPod

touch

The inAir 5000 LED is a helpful tool. Here’s what it means:

Flashing Blue

Blue

Flashing Orange

Flashing Green

Flashing Purple

Flashing Red

Before we begin.

• You need a Wi-Fi network to proceed.

• Make sure iTunes (10.1 or later) is running on your computer.

• Have your Wi-Fi network name and password ready for reference

• For information on alternative setups and ﬁ rmware updates, please visit the

online user manual at: support.alteclansing.com

Connect your devices.

• Disconnect any Ethernet or power cables on your inAir 5000.

• Reconnect the power cable to your inAir 5000 and power it ON.

• Wait for the LED on the player to start ﬂ ashing purple. (About 30 seconds)

• Press the “Wi-Fi Connect” button on the back of your device. The LED will

begin to ﬂ ash orange.

• Go to your system’s Wi-Fi settings and select “inAir-Setup’. You will be

temporarily disconnected from your home network.

• The LED will change to solid blue. This conﬁ rms that you have entered

“inAir-Setup.”

1 3

4 6

Setting up your inAir 5000 remote.

• In iTunes, go to preferences and select ‘devices’.

• Select the check box for ‘allow iTunes audio control from

remote speakers’.

• Look for the AirPlay icon

at the bottom right of iTunes,

click and select your inAir 5000.

Start playing music!

For additional information, please visit:

support.alteclansing.com

RECOMMENDED SETUP

If the LED begins to ﬂ ash purple, there is a problem connecting to your home network. Usually this is caused by

an incorrect password. Follow these easy steps.

• Press the “Wi-Fi Connect” button, located on the back of your device.

• Wait for LED to start ﬂ ashing orange.

• Starting from Step 2, go to your system’s Wi-Fi setting and select “in Air- Setup”

• Repeat the steps as instructed.

Connecting

On / Connected

Access Point Mode

Applying Update

No Network Detected

Firmware Error

Color Meaning

Altec inAir5000 Quick Connect Manual

Altec inAir5000 Quick Connect Manual

Altec inAir5000 Quick Connect Manual

Related papers

Other documents