P/N: 2300-0531
5
6
Pan/Tilt Internet Camera
Model No.: SP5531/SP5531W
http://www.micronet.info
Quick Installation Guide
Configuration
Step 1: Using IP Finder to search the Camera
Insert the Manual & Utility CD into your computer's
CD- ROM drive to initiate the Auto-Run program.
Click the IP Finder button to launch the utility. The
control panel will appear as below.
Note: If you are unable to find any IP camera, it might be one
of reason below:
1.DHCP setting of router isn't enabled.
2.The router or Camera is not power on.
Please type the default IP address (192.168.0.30)
with default user name & password.
Step
Step
Step
Step
Note:
Note:
Note:
Note:
Note:
Note: For more setting detail, please refer to the Advanced
Installation Guide on the provided Installation CD.
For details of operating Ultra View, please refer to the Software
Manual on the provided Manual & Utility CD.
If you have any problem on the product(s), please contact
your local authorized dealer.
Note:
Step 2: Login the camera with default user name & password
When the login window appears, enter the default
User name (admin) and password (admin) and
press OK to access to the main screen of the
camera's Web Configuration.
Step 2:
Step 2:
Step 2:
Step 2:
Step 3: Setup
The Smart Wizard will guide you through the
necessary settings with detailed instructions on
each step.
Step 2:
Step 2:
Step 2:
2
Introduction
SP5531/SP5531W is a powerful Pan/Tilt IP camera, also
equipped with general-purpose input/output (GPIO) ports to a
variety of external devices, such as motion detection sensors or
alarms.
SP5531/SP5531W provides remote high-quality video and audio,
and 2-way audio function. The Infrared LEDs and light sensor
enable the camera to capture images even in the dark
environment. It is also supports 3GPP file format for viewing live
video from your mobile phone or PDA.
Package Contents
Before you start installing the device, verify the following items
are in the package:
One SP5531 or SP5531W Pan/Tilt Internet Camera
One Quick Installation Guide
One Manual & Utility CD
One Power Adapter
One External Antenna (Only for SP5531W)
One Wall Mount Kit
One Ethernet Cable (RJ-45 type)
Note: Contact your dealer immediately if any of the above items
are missing, damaged, or if the unit does not work.Note:
System Requirement
Networking
LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet.
WLAN: IEEE 802.11b/g (only for SP5531W).
Accessing the Camera using Web Browser
Platform: Microsoft® Windows® 2000/XP/Vista
CPU: Intel Pentium III 800MHz or above
RAM: 512MB
800x600 or above
: Microsoft® Internet Explorer 6.0 or above
Mozilla Firefox 2.00 or above
Apple Safari 2 or above
Hardware Installation
Resolution:
Internet Browser
Step 2: Connecting the Camera to LAN
Use the provided Ethernet cable to connect the
camera to your local area network (LAN). When you
connect the power adapter, the camera is powered
on automatically. You can verify the power status from
the Power LED on the front panel of the camera.
Once connected, the Link LED starts flashing green
light and the camera is ready for use now.
Step 2:
Step 2:
Step 2:
Step 2:
Step 2:
Step 2:
Step 2:
1
3 4
Connecting the Ethernet Cable
Step 3: Connecting the Camera to WLAN (only for SP5531W)
If you use a wireless network in your application
environment, you need to attach the included
external antenna to the camera.
Step 3:
Step 3:
Step 3:
Connecting the External Antenna
Step1: Installing the Camera Stand
The camera comes with a
wall mount kit, which allows
you to place your camera
anywhere by mounting the
camera through the three
screw holes located in the
base of the Wall Mount Kit.
Step1:
Step1:
Step1:
Step1:
Step1:
Step1:
Step1:
The wall mount kit
/