Legrand Mighty Mo 6E Q-Series End of Row Support Brackets 6" - 12" Wide Manager Installation guide

Type
Installation guide

Legrand Mighty Mo 6E Q-Series End of Row Support Brackets 6" - 12" Wide Manager is a device designed to provide stability and support to the vertical manager cage of a Legrand Mighty Mo 6E rack system. It is compatible with Q-Series vertical managers that are 6-12 inches wide. The End of Row Support Brackets can be installed on either side of the rack system, providing flexibility in terms of placement.

The brackets are designed to hook onto the horizontal cage bars of the vertical manager, ensuring secure attachment. They also feature cage nuts that insert into square holes on the rack assembly, further enhancing stability. To ensure a firm connection, the brackets are secured using #12-24 combo pan head screws and external tooth lockwashers.

Legrand Mighty Mo 6E Q-Series End of Row Support Brackets 6" - 12" Wide Manager is a device designed to provide stability and support to the vertical manager cage of a Legrand Mighty Mo 6E rack system. It is compatible with Q-Series vertical managers that are 6-12 inches wide. The End of Row Support Brackets can be installed on either side of the rack system, providing flexibility in terms of placement.

The brackets are designed to hook onto the horizontal cage bars of the vertical manager, ensuring secure attachment. They also feature cage nuts that insert into square holes on the rack assembly, further enhancing stability. To ensure a firm connection, the brackets are secured using #12-24 combo pan head screws and external tooth lockwashers.

WWW.LEGRAND.US
INSTALLATION INSTRUCTIONS END OF
ROW KIT 6-12” WIDE Q-SERIES VERTICAL
MANAGER TO MM6 E RACK
DOCUMENT NUMBER REV. ECN # SHEET DWN. BY: DATE CHK. BY: DATE APP. BY: DATE
OR-71601937
00
1 OF 5
J.QUINN
04/24/17
JPS 04/24/2017 CV 04/24/2017
THIS INSTRUCTION SHEET IS TO ASSEMBLE THE END OF ROW STABILIZER
BRACKET KIT TO MM6E RACK SYSTEM & Q-SERIES VERTICAL MANAGER 6-
12” WIDE VERSIONS
TABLE OF CONTENTS:
1. INSPECTION CARTON CONTENTS
2. TOOLS REQUIRED
3. ASSEMBLY PROCEEDURES TO MM6 RACKING SYSTEM END OF ROW STABILIZER BRACKETS
1. INSPECTION CARTON CONTENTS:
2. TOOLS REQUIRED
(REQUIRED) #2 PHILIPS SCREW DRIVER OR DRIVER BIT
FLAT BLADED SCREW DRIVER (OPTIONAL)
(OPTIONAL) CORDLESS DRILL WITH ADJUSTABLE TORQUE SETTINGS
3. ASSEMBLY PROCEEDURES Q-SERIES VERTICAL MANAGER TO MM6
RACKING SYSTEM END OF ROW STABILIZER BRACKETS
1. PRIOR TO UNPACKING KITS INSPECT ALL CARTONS FOR DAMAGE, THEN UNPACK CARTON AND INSPECT
CONTENTS FOR DAMAGE AND INVENTORY ALL PARTS SHOWN ABOVE
REPORT ANY MISSING OR DAMAGED
ITEMS TO THE SHIPPER FOR POTENTIAL REIMBURSEMENT.
2. ASSEMBLE MM6 ENHANCED RACK SYSTEM ACCORDING TO IT’S INSTALLATION INSTUCTIONS.
WWW.LEGRAND.US
INSTALLATION INSTRUCTIONS END OF
ROW KIT 6-12” WIDE Q-SERIES VERTICAL
MANAGER TO MM6 E RACK
DOCUMENT NUMBER REV. ECN # SHEET DWN. BY: DATE CHK. BY: DATE APP. BY: DATE
OR-71601937
00
2 OF 5
J.QUINN
04/24/17
JPS 04/24/2017 CV 04/24/2017
3. REPEAT FOR Q-SERIES VERTICAL MANAGER 6-12 WIDE VERSIONS USING IT’S INSTALLATION INSTRUCTION.
MOUNT Q-SERIES VERTICAL MANAGER TO MM6 ENHANCED RACK SYSTEM USING EITHER MM6EQMK7 KIT (7FT
RACK) MM6EQMK8 (8FT RACK) AND IT’S INSTRUCTION SHEET BEFORE INSTALLING THE END OF ROW BRACKETS.
3. ASSEMBLY PROCEEDURES Q-SERIES VERTICAL MANAGER TO MM6
RACKING SYSTEM END OF ROW STABILIZER BRACKETS CONTINUED:
4. LOCATE A SUITABLE LOCATION ON THE RACK AND VERTICAL MANAGER CAGE FOR HOOKING THE END OF
ROW BRACKET TO THE VERTICAL MANGER AND SQUARE HOLE FOR INSERTING THE #12-24 CAGE NUT NEAR THE
TOP AND BOTTOM OF THE VERTICAL MANAGER AND RACK ASSEMBLY.
3. ASSEMBLY PROCEEDURES Q-SERIES VERTICAL MANAGER TO MM6
RACKING SYSTEM END OF ROW STABILIZER BRACKETS CONTINUED:
5. BEGIN BY INSTALLING THE CAGE NUT INTO NEAREST SQUARE HOLE.
6. HOOK END OF ROW BRACKET TO THE LOWER MIDDLE HORIZONTAL CAGE BAR.
PLEASE NOTE: THE END OF ROW STABILIZER BRACKET KIT CAN BE USED TO MOUNT ON
EITHER SIDE OF THE MM6 ENHANCED RACK SYSTEM (RIGHT OR LEFT HAND
ORIENTATION)
WWW.LEGRAND.US
INSTALLATION INSTRUCTIONS END OF
ROW KIT 6-12” WIDE Q-SERIES VERTICAL
MANAGER TO MM6 E RACK
DOCUMENT NUMBER REV. ECN # SHEET DWN. BY: DATE CHK. BY: DATE APP. BY: DATE
OR-71601937
00
3 OF 5
J.QUINN
04/24/17
JPS 04/24/2017 CV 04/24/2017
3. ASSEMBLY PROCEEDURES Q-SERIES VERTICAL MANAGER TO MM6
RACKING SYSTEM END OF ROW STABILIZER BRACKETS CONTINUED:
7. INSTALL #12 EXTERNAL TOOTH LOCKWASHER, AND #12-24 COMBO PAN HEAD SCREW TIGHTEN TO HAND
TIGHT.
8. REPEAT SAME PROCEDURE FOR LOWER MOUNTING BRACKET, EXCEPT HOOK BRACKET ON UPPER MIDDLE
HORIZONTAL CAGE BAR.
9. RETIGHTEN ALL
SCREW CONNECTIONS AS NECESSARY
AND TORQUE TO 40 INCH POUNDS MAX.
INSTALLATION IS NOW COMPLETE.
WWW.LEGRAND.US
INSTALLATION INSTRUCTIONS END OF
ROW KIT 6-12” WIDE Q-SERIES VERTICAL
MANAGER TO MM6 E RACK
DOCUMENT NUMBER REV. ECN # SHEET DWN. BY: DATE CHK. BY: DATE APP. BY: DATE
OR-71601937
00
4 OF 5
J.QUINN
04/24/17
JPS 04/24/2017 CV 04/24/2017
RIGHT HAND INSTALLED VIEW:
WWW.LEGRAND.US
INSTALLATION INSTRUCTIONS END OF
ROW KIT 6-12” WIDE Q-SERIES VERTICAL
MANAGER TO MM6 E RACK
DOCUMENT NUMBER REV. ECN # SHEET DWN. BY: DATE CHK. BY: DATE APP. BY: DATE
OR-71601937
00
5 OF 5
J.QUINN
04/24/17
JPS 04/24/2017 CV 04/24/2017
LEFT HAND INSTALLED VIEW:
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Legrand Mighty Mo 6E Q-Series End of Row Support Brackets 6" - 12" Wide Manager Installation guide

Type
Installation guide

Legrand Mighty Mo 6E Q-Series End of Row Support Brackets 6" - 12" Wide Manager is a device designed to provide stability and support to the vertical manager cage of a Legrand Mighty Mo 6E rack system. It is compatible with Q-Series vertical managers that are 6-12 inches wide. The End of Row Support Brackets can be installed on either side of the rack system, providing flexibility in terms of placement.

The brackets are designed to hook onto the horizontal cage bars of the vertical manager, ensuring secure attachment. They also feature cage nuts that insert into square holes on the rack assembly, further enhancing stability. To ensure a firm connection, the brackets are secured using #12-24 combo pan head screws and external tooth lockwashers.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI