Kasefox KF-FSBLGT01 User guide

Brand: Kasefox

Model: KF-FSBLGT01

Type: User guide

OR

Your Kasefox bin can be

assembled with

knots on the outside...

...on the inside for a

more modern look!

STEP 1

Unfold your felt bin. Be sure the

Kasefox logo (located on one of the

slotted flaps) is facing up.

STEP 2

Lift the logo flap to a vertical position

and wrap one of the adjacent flaps

(with holes) around the outside of the

logo flap. Align the bottom slot of the

logo flap with the corresponding

bottom hole on the outside flap.

STEP 3

If assembling the bin with knotted ends

on the outside*, take the looped end of

one suede tie and feed it through the

bottom outside hole and into the

corresponding slot on the inner flap.

*If assembling with knots on the inside, begin

process on bottom inside (vs. bottom outside).

STEP 4

Wrap the adjacent flap (with holes)

around the outside of the logo flap

and feed the bottom suede tie you’ve

been working with through the inside

slot and the outside hole of the outer

flap. Hook the loop around the knot

to secure it in place.

STEP 5

Repeat Steps 3 and 4 for the upper

slots and holes adjacent to the

Kasefox logo.

STEP 6

Repeat for the remaining two ties

(bottom first, then top) and you’re

ready to conquer your chaos with

style and beauty!

kasefox

ASSEMBLY INSTRUCTIONS

CONTENTS:

1 single-piece felt bin

4 suede ties

1

Kasefox KF-FSBLGT01 User guide

Brand: Kasefox

Model: KF-FSBLGT01

Type: User guide

Download PDF

Other documents