DHP Metal X-LOFT Bed User manual

Brand: DHP

Model: Metal X-LOFT Bed

Type: User manual

This manual is also suitable for

WARNING



infants and babies must not sleep on this bed for safety reasons. To prevent injury and damage to this unit, PROHIBIT jumping on it.





IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

STOP

DO NOT RETURN PRODUCT TO THE

STORE

Individual stores do not stock parts.

If a part is missing or damaged, call our

toll-free customer service line. We will

gladly ship your replacement parts FREE

of charge.

Need Parts or Assistance?

1-800-267-1739

or access our website

www.dhpfurniture.com

For prompt, reliable service, please have your assembly

manual ready.

B34544009603-10125-M

Date of Purchase

___ / ___ / ___

Lot Number

_________

5440096

Metal X-LOFT Bed

Black

200 lbs.

91 kgs.

50 lbs.

23 kgs.

- Call our toll free number if you need assistance.

- Move your new furniture carefully, with two people lift and carry the unit

to it's new location.

- Never push, drag or pull your furniture (especially on carpet).

- Your DHP furniture can be disassembled and reassembled to move.

- Additional parts are available for a nominal fee.

- Read each step carefully. It is very important that each step of instruction is

performed in the correct order. If these steps are not followed in sequence, assembly

difficulties will occur.

- Make sure all parts are included. Most parts are labeled or stamped on the raw

edge.

- Work in spacious area, preferably on a carpet, near the place the unit will be used.

- Do not use power tools to assemble your furniture. Power tools may strip or

damage the parts.

Visit

www.dhpfurniture.com to view the limited warranty valid in the U.S. and Canada.

HELPFUL HINTS

Visit our website:

www.dhpfurniture.com

Write to:

DHP

410E, First Street South,

Wright City,

MO 63390, USA

Attention: Consumer Service.

READ BEFORE BEGINNING ASSEMBLY

Warranty Information

DHP warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of

original purchase. This is solely limited to the repair or replacement of defective parts and no assembly labor is included.

This warranty does not apply to any product which has been improperly assembled, subjected to misuse or abuse or which has been altered or repaired in any way.

Liability for consequential damages is excluded to the extent exclusion is permitted by law. This warranty gives you specific legal rights and you may also have other

rights which vary from state to state.

To obtain warranty service, purchaser must present original bill of sale. Components repaired or replaced are warranted through the remainder of the original warranty

period only. The defective components will be repaired or replaced without charge, subject to the terms and conditions described above.

2 / 26

3 / 26

PARTS

LADDER SIDE RAIL

T908200

x 1

HOLE

RIGHT BASE

T908280

x 1

REAR BRACE

T908300

x 2

DESK

T908250

x 1

KING SUPPORT

T908260

x 2

BRACE

T908270

x 4

RIGHT GUARD RAIL

T908220

x 1

UPPER SIDE RAIL

T908210

x 1

SAFETY BRACKET

T908240

x 2

LEFT BASE

T908290

x 1

LEFT GUARD RAIL

T908230

x 1

NO HOLES

HOLE

Note: "X""Z"have been pre-assembled on "C/D""C/D/I/J", they are available for replacement.

END CAP 01

T392510

x 4

END CAP 02

T613050

x 8

4 / 26

LOWER SIDE RAIL

T908310

x 1

FRONT GUARD RAIL

T908320

x 1

REAR GUARD RAIL

T908330

x 1

SLATS

T609100

x 22

SLATS SPACERS

T391650

x 21

PLASTIC PLUG

T391660

x 44

DESK SUPPORT

T908360

x 1

LADDER

T928270

x 1

REAR STRETCHER

T908370

x 2

ADJUSTABLE GLIDE

T908380

x 4

KNOB

T320430

x 8

Please respect the direction of the

arrow when assembling

PARTS

END CAP 03

T393160

X 4

END CAP 04

T393170

X 4

Note: "X1""Z1"have been pre-assembled on "U""S", they are available for replacement.

5 / 26

T5440096-01

HARDWARE PACK

NOTE:

Please do not completely tighten all the hardware, until

the entire assembly is complete, unless indicated

otherwise in the step-by-step instructions

BOLT

1/4'' x 2 9/16''

x 6

NUT 1/4"

x 4

HEX KEY

4mm

x 1

WRENCH

x 1

BOLT

1/4'' x 1 7/8''

x 2

BOLT

1/4'' x 1 9/16 ''

x 5

BOLT

1/4'' x 1 3/8''

x 3

BOLT

1/4'' x 3/4''

x 56

6 / 26

4X2=8

7 / 26

Attach (E) & (H) to (G) with BOLT (5).

X 2

8 / 26

2.1 Attach (D) to (G) & (H) with BOLT (5).

2.2 Attach (J) to (G) & (H) with BOLT (5), then screw (V) onto (J).

Repeat the same assembly sequence by replacing (D) with (C), (J) with (I) to assemble the Bed End structure of the opposite side.

2.1

2.2

8 X 2 =16

X 2

9 / 26

3.1 Attach (A) & (B) to (C) & (D) with BOLT (5).

3.2 Attach (L) to (I) & (J) with BOLT (5).

3.3 Screw (W) onto (C,D,I,J).

3.1

3.2

3.3

x 12

10 / 26

4.1 Attach (M) to (A) & (D) with BOLT (1) & BOLT (3).

4.2 Attach (N) to (B,C & D) with BOLT (1) & BOLT (3).

4.1

x 3 x 6

4.2

11 / 26

Attach (S) to (A) with BOLT (3).

x 2

12 / 26

6.1

6.2

6.1 Attach (O) to (A) & (B), then lock (O) into place with (Y).

6.2 Interlock (Q) onto (O) down the middle of the bed.

6.1

6.2

13 / 26

NOTE: respect the direction of

the arrow when assembling.

7.2

7.1

x 4 x 4

x 2 x 2

13 / 26

7.2

7.1

7.1 Attach (K) to (L) with BOLT (5),attach (U) to (L) with BOLT (4) and NUT (6).

7.2 Attach (U) to (B) with BOLT (2) and NUT (6).

x 4 x 4

x 2

14 / 26

Attach (T) to (F) with BOLT (5).

x 8

15 / 26

9.1

9.2

9.3

9.1 Attach (T) to (E) with BOLT (5).

9.2 Attach (T) to (K) with BOLT (5).

9.3 Attach (T) to (U) with BOLT (4).

x 8 x 1

9.1

9.2

9.3

WARNING







.



ENSURE THICKNESS OF MATTRESS AND FOUNDATION COMBINED IS GREATER THAN 4" AND THAT IT DOES NOT EXCEED 6".



SURFACE OF MATTRESS MUST BE AT LEAST 5" (127MM) BELOW THE UPPER EDGE OF GUARDRAILS.



DO NOT ALLOW CHILDREN UNDER 6 YEARS OF AGE TO USE THE UPPER BUNK.



PERIODICALLY CHECK AND ENSURE THAT THE GUARDRAIL, LADDER AND OTHER COMPONENTS ARE IN THEIR PROPER POSITION, FREE FROM DAMAGE, AND THAT ALL

CONNECTORS ARE TIGHT.



DO NOT ALLOW HORSEPLAY ON OR UNDER THE BED AND PROHIBIT JUMPING ON THE BED.



ALWAYS USE THE LADDER FOR ENTERING AND LEAVING THE UPPER BUNK. IF THE BUNK BED WILL BE PLACED NEXT TO THE WALL, THE GUARDRAIL THAT RUNS THE FULL

LENGTH OF THE BED SHOULD BE PLACED AGAINST THE WALL TO PREVENT ENTRAPMENT BETWEEN THE BED AND WALL.



PROHIBIT MORE THAN ONE PERSON ON UPPER BUNK.



DO NOT USE SUBSTITUTE PARTS. CONTACT DHP FOR REPLACEMENT PARTS.



USE OF A NIGHT LIGHT MAY PROVIDE ADDED SAFETY PRECAUTION FOR A CHILD USING THE UPPER BUNK.



ALWAYS USE GUARDRAILS ON BOTH LONG SIDES OF THE UPPER BUNK. IF THE BUNK BED WILL BE PLACED NEXT TO THE WALL, THE GUARDRAIL THAT RUNS THE FULL

LENGTH OF THE BED SHOULD BE PLACED AGAINST THE WALL TO PREVENT ENTRAPMENT BETWEEN THE BED AND WALL.

THE USE OF WATER OR SLEEP FLOTATION MATTRESSES IS PROHIBITED.



STRANGULATION HAZARD- NEVER ATTACH OR HANG ITEMS TO ANY PART OF THE BUNK BED THAT ARE NOT DESIGNED FOR USE WITH THE BED; FOR EXAMPLE, BUT

NOT LIMITED TO, HOOKS, BELTS AND JUMP ROPES.



KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

16 / 26

Limites Del Peso: 200 Lbs\91 Kgs , ESCRITORIO : 50 Lbs\23 Kgs



A) Escalera riel lateral - T908200 - CANTIDAD: 1

B) Corte riel lateral - T908210 - CANTIDAD: 1

C) Derecho barandilla - T908220 - CANTIDAD: 1

D) Izouierda barandilla - T908230 -CANTIDAD: 1

E) Soporte de seguridad - T908240 -CANTIDAD: 2

F) Escritorio -T908250 -CANTIDAD: 1

G) Rey de apoyo - T908260 -CANTIDAD: 2

H) Abrazadera - T908270 - CANTIDAD: 4

I) Derecho de base - T908280 - CANTIDAD: 1

J) Base izquierda - T908290- CANTIDAD: 1

K) Tirante trasero - T908300 - CANTIDAD: 2

X) Cubierta De Extremo 01 - T392510 - CANTIDAD: 4

Z) Cubierta De Extremo 02 - T613050 - CANTIDAD: 8



el reemplazo.



L) Lateral inferior rail - T908310 - CANTIDAD: 1

M) Frente barandilla - T908320 - CANTIDAD: 1

N) Bear barandilla - T908330 - CANTIDAD: 1

O) Tubos - T908340 -CANTIDAD: 22

Q) Separador para tubo - T609100 -CANTIDAD: 21

S) Escalera - T908350 - CANTIDAD: 1

T) Oficina de apoyo - T928270 - CANTIDAD: 1

U) Trasero camilla - T908370 - CANTIDAD: 2

V) Nivelador ajustable - T908380 - CANTIDAD: 4

W) Mando -T320430 - CANTIDAD: 8



X1) Cubierta de extremo 03 - T393160 - CANTIDAD: 4

Z1) Cubierta de extremo 04 - T393170 - CANTIDAD: 4

11" se ha premontado en "U""S", lo se disponible para el

reemplazo.



1) PERNO

1/4'' x 2 9/16''

- CANTIDAD: 6

2) PERNO

1/4'' x 1 7/8''

- CANTIDAD: 2

3) PERNO

1/4'' x 1 9/16''

- CANTIDAD: 5

4) PERNO

1/4'' x 1 3/8''

-CANTIDAD: 3

5) PERNO

1/4'' x 3/4''

-CANTIDAD: 56

6) TUERCA 1/4" -CANTIDAD: 4

7) LLAVE DE TUERCA HEXAGONAL 4mm - CANTIDAD: 1

8) LLAVE - CANTIDAD: 1

Paquete De Componentes :T5440096-01

NOTA:





Una el (E,H) en (G) con TORNILLO

(5).



2.1 Una el (D) en (G,H) con TORNILLO

(5).

2.1 Una el (J) en (G,H) con TORNILLO

(5), coloque los (V) sobre (J).