Omnitron Systems Technology OmniLight 23" Rack Mount Extender Owner's manual

Brand
Omnitron Systems Technology
Model
OmniLight 23" Rack Mount Extender
Type
Owner's manual
Page 2
040-05800-201B 5/17
Warning
The operating description in this Instruction Manual is for use by qualied personnel only. To avoid
electrical shock, do not perform any servicing of this module other than that contained in the operating
instructions, unless you are qualied and certied to do so by Omnitron Systems Technology, Inc.
Caution
All user-required operations can be performed without opening the chassis. Never attempt to open or
remove the cover or tamper with the chassis. There are no user replaceable or serviceable parts in
this unit. Equipment is not intended to be installed and used in a place (home, school, or public area)
accessible to the general population.
Warranty
This product is warranted to the original purchaser against defects in material and workmanship for a
period of TWO YEARS from the date of shipment. A LIFETIME warranty may be obtained by the original
purchaser by REGISTERING this product with Omnitron within 90 days from the date of shipment. TO
REGISTER, COMPLETE AND MAIL OR FAX THE ENCLOSED REGISTRATION FORM. Or you may
register your product on the Internet at http://www.omnitron-systems.com. During the warranty period,
Omnitron will, at its option, repair or replace a product which is proven to be defective.
For warranty service, the product must be sent to an Omnitron designated facility, at Buyer’s expense.
Omnitron will pay the shipping charge to return the product to Buyer’s designated US address using
Omnitron’s standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from improper or inadequate use and/
or maintenance of the equipment by Buyer, Buyer-supplied equipment, Buyer-supplied interfacing,
unauthorized modications or tampering with equipment (including removal of equipment cover by
personnel not specically authorized and certied by Omnitron), or misuse, or operating outside the
environmental specication of the product (including but not limited to voltage, ambient temperature,
radiation, unusual dust, etc.), or improper site preparation or maintenance. No other warranty is
expressed or implied. Omnitron specically disclaims the implied warranties of merchantability and
tness for any particular purpose.
Exclusive Remedies
The remedies provided herein are the Buyer’s sole and exclusive remedies. Omnitron shall not be liable
for any direct, indirect, special, incidental, or consequential damages, whether based on contract, tort,
or any legal theory.
General and Copyright Notice
This publication is protected by U.S. and international copyright laws. All rights reserved. No part of this
publication may be reproduced, stored in a retrieval system, translated, transcribed, or transmitted, in
any form, or by any means, manual, electric, electronic, electromagnetic, mechanical, chemical, optical
or otherwise, without prior explicit written permission of Omnitron Systems Technology, Inc.
Omnitron Systems Technology, Inc., the Omnitron logo and OST and are trademarks of Omnitron
Systems Technology, Inc. OmniLight is a registered trademark of Omnitron System Technology.
All other trademarks are the property of their respective owners.
The information contained in this publication is subject to change without notice. Omnitron Systems
Technology, Inc. is not responsible for any inadvertent errors.
©2017 Omnitron Systems Technology, Inc
OmniLight
®
23” Rack Mount Extender
USER MANUAL
PRODUCT OVERVIEW
The 23” Rack Mount Extender, model number 5800-20, allows the OmniLight 14 Module
Chassis and 3-Module Shelf to be installed in a 23” equipment rack.
INSTALLATION PROCEDURE
1) Unpacking, Visual Inspection and Inventory
2) General Installation
1) UNPACKING, VISUAL INSPECTION AND INVENTORY
Review the contents. The following items should be included:
• Two Rack Mount Extender Bracket • Four 10-32 Screws
• User Manual
2) GENERAL INSTALLATION
Install the rack mount extender brackets to the existing mounting bracket as shown in the
diagram. Install the extender bracket on both sides using the 10-32 screws.
Bracket Installation
Omnitron Systems Technology * 38 Tesla * Irvine, CA 92618
949.250.6510 tel * 949.250.6514 fax * www.omnitron-systems.com
  • Page 1 1

Omnitron Systems Technology OmniLight 23" Rack Mount Extender Owner's manual

Brand
Omnitron Systems Technology
Model
OmniLight 23" Rack Mount Extender
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents