IDEAL Security SK9W User manual

WHAT SIZE CLOSER DO I NEED? - Pneumatic Storm Door Closer Replacement Guide

For best performance replace your pneumatic storm door closer with the same size and type

(tube length, diameter & if it has a torsion bar) that the manufacturer originally supplied

with your storm door.

The size of the door closer is determined by the thickness and weight of the storm door.

Use the chart below to determine the best match for the door you have.

Each size of door closer can have a “Quick Hold” option which will automatically hold

the door open at 55° and will release when pushed open further.

FOR DOORS UP TO 1-1/4” THICK STANDARD DOOR CLOSER

WITH BY PASS FOR ADDITIONAL LATCHING POWER & WINTER / SUMMER BRACKET

Closer models SK9 (with Storm Chain) SK80 (with Quick-Hold*) SK4900

WITH TORSION BAR FOR MAXIMUM ADDITIONAL LATCHING POWER

WITH BY PASS FOR ADDITIONAL LATCHING POWER & WINTER / SUMMER BRACKET

FOR HEAVIER DOORS OVER 1-1/2” THICK ULTRA HEAVY DUTY DOOR CLOSER

AUTOMATIC HOLD-OPEN FEATURE

* QUICK-HOLD

FOR DOORS FROM 1-3/8” TO 2” THICK HEAVY DUTY DOOR CLOSER

Closer models SK1730 (with Storm Chain) SK8730 (with Quick-Hold*) SK4730

Closer models SK3015 (with Quick-Hold*) SK4015

AUTOMATICALLY

KEEPS THE DOOR OPEN AT 55°

TORSION BAR

INCREASES LATCHING POWER

For more information contact [email protected] www.idealinc.com

10.5” TUBE LENGTH • 1.25” DIAMETER

10.5” TUBE LENGTH • 1.5” DIAMETER