Electrolux EHS6620P 89L User manual

Ceramic glass hob

Encimera de vitrocerámica

Installation and Operating

Instructions

Instrucciones para el montaje

y para el uso

EHS 6620 P

822 930 344-A-070406-01

e

g

2

Dear Customer,

Please read these user instructions carefully and keep them to refer to later.

Please pass the user instructions on to any future owner of the appliance.

The following symbols are used in the text:

1 Safety instructions

Warning! Information that affects your personal safety.

Important! Information that prevents damage to the appliance.

3 Useful tips and hints

2 Environmental information

3

Contents

Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Operating the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Switching the appliance on and off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Selecting the cooking zone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setting the heat setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Switching the triple ring cooking zone on and off. . . . . . . . . . . . . . . . . . . . . . 9

Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Switching on the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Overriding the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Switching off the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Tips on Cooking and Frying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Cookware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Cleaning and Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Customer Service Centres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4

Operating Instructions

1 Safety instructions

3 Please comply with these instructions. If you do not, any damage resulting

is not covered by the warranty.

5 This appliance conforms with the following EU Directives:

– 73/23/EEC dated 19.02.1973 Low Voltage Directive

– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Di-

rective 92/31/EEC

– 93/68/EEC dated 22.07.1993 CE Marking Directive

Correct use

• This appliance should be used only for normal domestic cooking and fry-

ing of food.

• The appliance must not be used as a work surface or as a storage sur-

face.

• Additions or modifications to the appliance are not permitted.

• Do not place or store flammable liquids, highly inflammable materials or

fusible objects (e.g. plastic film, plastic, aluminium) on or near the appli-

ance.

Children’s safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

General safety

• The appliance may only be installed and connected by trained, registered

service engineers.

• Built-in appliances may only be used after they have built in to suitable

built-in units and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ceramic

(cracks, scratches or splits), the appliance must be switched off and dis-

connected from the electrical supply, to prevent the possibility of an elec-

tric shock.

• Repairs to the appliance must only be carried out by trained registered

service engineers.

5

Safety during use

• Remove stickers and film from the glass ceramic.

• There is the risk of burns from the appliance if used carelessly.

• Cables from electrical appliances must not touch the hot surface of the

appliance or hot cookware.

• Overheated fats and oils can ignite quickly. When cooking with fat or oil

(e.g. chips) do not leave the appliance unattended.

• Switch the cooking zones off after each use.

Safety when cleaning

• For cleaning, the appliance must be switched off and cooled down.

• For safety reasons, the cleaning of the appliance with steam jet or high-

pressure cleaning equipment is not permitted.

How to avoid damage to the appliance

• The glass ceramic can be damaged by objects falling onto it.

• The edge of the glass ceramic can be damaged by being knocked by the

cookware.

• Cookware made of cast iron, cast aluminium or with damaged bottoms

can scratch the glass ceramic if pushed across the surface.

• Objects that melt and things that boil over can burn onto the glass ceram-

ic and should be removed straightaway.

• To avoid damaging cookware and glass ceramics, do not allow saucepans

or frying pans to boil dry.

• Do not use the cooking zones with empty cookware or without cookware.

6

Description of the Appliance

Cooking surface layout

Control panel layout

Single cooking zone

1800W

Triple ring cooking zone

1050/1950/2700W

Control panel Single cooking zone

1200W

Outside/middle ring

On/Off

Display

Triple ring pilot light

On/Off

Cooking zone and

heat setting selection

7

Touch Control sensor fields

The appliance is operated using the Touch Control sensor fields. Functions

are controlled by touching sensor fields and confirmed by displays.

Touch the sensor fields from above, without covering other sensor fields.

Displays

Residual heat indicator

1 Warning! Risk of burns from residual heat. After being switched off, the

cooking zones need some time to cool down. Look at the residual heat indi-

cator

.

3 Residual heat can be used for melting and keeping food warm.

Sensor field Function

On / Off To switch the appliance on and off

Increase settings To select the cooking zone

To increase heat settings

Reduce settings To reduce heat settings

Triple ring switch To switch outer rings

on and off

Display Description

Cooking zone is switched off

- Heat settings Heat setting is set

ER Fault Malfunction has occurred

Residual heat Cooking zone is still hot

Child safety device Lock/child safety device is engaged

8

Operating the appliance

Switching the appliance on and off

Selecting the cooking zone

3 The decimal point is displayed by the selected cooking zone. Then a heat

setting must be set for this cooking zone within 6 seconds, otherwise it

must be re-selected.

Setting the heat setting

3 After selecting the cooking zone, briefly release the sensor field .

3 After 6 seconds with no input the selection is cancelled and the decimal

point goes out. To set a new setting, select the required cooking zone again.

Control panel Display

Switch on Touch for 2 seconds / decimal point flashes

Switch off Touch for 1 second

/ none

Control panel Display

Select Touch Decimal point lights up

Control field Display

Increase Touch to

Decrease Touch to

Switch off Touch and at the same time

9

Switching the triple ring cooking zone on and off

With the triple ring cooking zone the heating surface can be matched to the

size of the cookware.

3 When a heat setting is set, all three rings are switched on and the pilot lights

light up.

Control panel Pilot light

To switch outside

ring off

Touch for 1 second One pilot light

goes

out

To switch middle ring

off

Touch for 1 second Second pilot light

goes out

To switch middle ring

on

Touch for 1 second One pilot light

lights

up

To switch outside ring

on

Touch for 1 second Two pilot lights come

on

10

Using the child safety device

The child safety device prevents unintentional use of the appliance.

3 The child safety device can only be activated immediately after the appli-

ance has been switched on.

Switching on the child safety device

3 To override or switch the child safety device off sucessfully, the steps must

be performed immediately one after the other. No other sensor fields must

be touched between the steps described.

Overriding the child safety device

The child safety device can be switched off in this way for a single cooking

session; it remains activated afterwards.

Switching off the child safety device

Step Control panel Display

1.

Switch on appliance.

(Do not set a heat setting.)

/ (if hot)

2.

Touch for 5 seconds is displayed.

Appliance switches off.

Step Control panel Display

1.

Switch appliance on / (if hot)

2.

Touch the two of the front

cooking zones at the same

time

or

Decimal points flash

Until the appliance is next switched off, it can used as normal.

Step Control panel Display

1.

Switch appliance on / (if hot)

2.

Touch for 5 seconds or

Decimal points flash

Appliance switches off.

11

Safety cut-out

Cooking surface

• If after switching on the appliance a heat setting is not set for a cooking

zone within approx. 10 seconds, the appliance automatically switches it-

self off.

• If one or more sensor fields are touched for longer than approx. 10 sec-

onds, the cooking surface is automatically switched off. ER03 flashes on

the display or changes to if there is still residual heat.

• If all cooking zones are switched off, the cooking surface automatically

switches itself off after approx. 10 seconds.

Control panel

3 Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel

switches all cooking zones off.

Cooking zones

• If one of the cooking zones is not switched off after a certain time, or if the

heat setting is not modified, the relevant cooking zone switches off auto-

matically. is displayed.

Heat setting Switches off after

1 - 2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

12

Tips on Cooking and Frying

3 Information on acrylamides

According to the latest scientific knowledge, intensive browning of food, es-

pecially in products containing starch, can constitute a health risk due to

acrylamides. Therefore we recommend cooking at the lowest possible tem-

peratures and not browning foods too much.

Cookware

• You can recognise good cookware from the bottoms of the pans. The

bottom should be as thick and flat as possible.

• Cookware made of enamelled steel or with aluminium or copper bottoms

can leave discolorations on the glass ceramic surface which are difficult or

impossible to remove.

Energy saving

2 Always place cookware on the cooking

zone before it is switched on.

2 If possible, always place lids on the pans.

2 Switch cooking zones off before the end

of the cooking time, to take advantage of

residual heat.

2 Bottom of pans and cooking zones

should be the same size.

13

Examples of cooking applications

The information given in the following table is for guidance only.

Heat

set-

ting

Cooking-

process

suitable for

Cooking

time

Tips/Hints

0 Residual heat, Off position

1

Keeping

food

warm

Keeping cooked foods

warm

as required Cover

1-2

Melting

Hollandaise sauce,

melting butter, chocolate,

gelatine

5-25 mins. Stir occasionally

Solidi-

fying

Fluffy omelettes, baked

eggs

10-40 mins. Cook with lid on

2-3

Simmer-

ing on

low heat

Simmering rice and milk-

based dishes

Heating up ready-cooked

meals

25-50 mins.

Add at least twice as

much liquid as rice, stir

milk dishes part way

through cooking

3-4

Steaming

Braising

Steaming vegetables, fish

braising meat

20-45 mins.

With vegetables add

only a little liquid (a few

tablespoons)

4-5

Boiling

Steaming potatoes 20-60 mins.

Use only a little liquid, e.

g.: max.

¼

l water for

750 g potatoes

Cooking larger quantities of

food, stews and soups

60-150 mins.

Up to 3 l liquid plus in-

gredients

6-7

Gentle

Frying

Frying escalopes, veal cor-

don bleu, cutlets, rissoles,

sausages, liver, roux, eggs,

pancakes, doughnuts

Steady frying

Turn halfway through

cooking

7-8

Heavy

Frying

Hash browns, loin steaks,

steaks, Flädle (pancakes for

garnishing soup)

5-15 mins.

per pan

Turn halfway through

cooking

9

Boiling

Searing

Deep

frying

Boiling large quantities of water, cooking pasta, searing meat (gou-

lash, pot roast), deep frying chips

14

Cleaning and Care

1 Take care! Risk of burns from residual heat.

1 Warning! Sharp objects and abrasive cleaning materials will damage the

appliance. Clean with water and washing up liquid.

1 Warning! Residues from cleaning agents will damage the appliance. Re-

move residues with water and washing up liquid.

Cleaning the appliance after each use

1. Wipe the appliance with a damp cloth and a little washing up liquid.

2. Rub the appliance dry using a clean cloth.

Removing deposits

1. Place a scraper on the glass ceramic surface at an angle.

2. Remove residues by sliding the blade over the surface.

3. Wipe the appliance with a damp cloth and a little washing up liquid.

4. Rub the appliance dry using a clean cloth.

*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops

3 Remove stubborn residues with a cleaner for glass ceramic or stainless

steel.

3 Scratches or dark stains on the glass ceramic that cannot be removed do

not however affect the functioning of the appliance.

Remove

Type of dirt

imme-

diately

when the appliance has

cooled down

using

sugar, food containing sugar yes ---

a scraper*

plastics, tin foil yes ---

limescale and water rings --- yes

cleaner for glass ce-

ramic or stainless

steel*

fat splashes --- yes

shiny metallic discolouration --- yes

15

What to do if …

3 In the event of any other fault codes that arise, disconnect the appliance

from the electrical supply for a few seconds. (Take out the fuse from the

house’s wiring system.) If the fault is displayed again, please call the

Customer Care Department and inform them of the fault code.

If you are unable to remedy the problem by following the above sug-

gestions, please contact your dealer or the Customer Care Depart-

ment.

Problem Possible cause Remedy

The cooking zones are not

functioning.

No cooking zone selected Select cooking zone within

10 seconds of switching on

(Decimal point lights up)

The cooking zones cannot be

selected / Appliance does

not react to the control panel

input

More than 10 seconds have

passed since the appliance

was switched on

Switch on the appliance

again.

Select cooking zone within

10 seconds of switching on

The child safety device is ac-

tivated

Deactivate the child safety

device (See section “Child

safety device”)

The sensor fields are partly

covered by a damp cloth or

with liquid

Remove the cloth or the liq-

uid

Safety cut-out has been trig-

gered

Switch on the appliance

again

The residual heat indicator is

not displaying anything

The cooking zone was only

on for a short time and is

therefore not hot

If the cooking zone is sup-

posed to be hot, call the Cus-

tomer Service Department.

Er03

is displayed

Several sensor fields were

touched at the same time

Only touch one sensor field

Er21

is displayed

Safety cut-out due to over-

heating

Let the appliance cool down.

Remove cookware.

Er25

is displayed

(only for 10 seconds)

Appliance is incorrectly con-

nected

Disconnect the appliance

from the electrical supply and

have it connected properly

Er40

is displayed The overvoltage protector

has been activated (for an in-

correct connection see

above

Er25

or for overheat-

ing of the electronic compo-

nents see

Er21

)

Separate the appliance from

the mains for a few minutes

(remove the mains fuse).

Let the appliance cool down.

16

1 Warning! Repairs to the appliance are only to be carried out by qualified

service engineers. Considerable danger to the user may result from improp-

er repairs.

3 If the appliance has been wrongly operated, the visit from the customer

service technician or dealer may not take place free of charge, even during

the warranty period.

17

Disposal

2 Packaging material

The packaging materials are environmentally friendly and can be recycled.

The plastic components are identified by markings, e.g. >PE<, >PS<, etc.

Please dispose of the packaging materials in the appropriate container at

the community waste disposal facilities.

2 Old appliance

The symbol

W on the product or on its packaging indicates that this prod-

uct may not be treated as household waste. Instead it shall be handed over

to the applicable collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you will help

prevent potential negative consequences for the environment and human

health, which could otherwise be caused by inappropriate waste handling of

this product. For more detailed information about recycling of this product,

please contact your local city office, your household waste disposal service

or the shop where you purchased the product.

18

Installation Instructions

Safety instructions

The laws, ordinances, directives and standards in force in the country of use

are to be followed (safety regulations, proper recycling in accordance with

the regulations, etc.)

Installation may only be carried out by a qualified electrician.

The minimum distances to other appliances and units are to be observed.

Anti-shock protection must be provided by the installation, for example

drawers may only be installed with a protective floor directly underneath the

appliance.

The cut surfaces of the worktop are to be protected against moisture using

a suitable sealant.

The sealant seals the appliance to the work top with no gap.

Avoid installing the appliance next to doors and under windows. Otherwise

hot cookware may be knocked off the rings when doors and windows are

opened.

1 WARNING!

Risk of injury from electrical current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of voltage.

• Observe connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection through correct installation by a qualified

electrician.

• The appliance must be connected to the electrical supply by a qualified

electrician.

1 IMPORTANT!

Risk of injury from electrical current.

Loose and inappropriate plug and socket connections can make the termi-

nal overheat.

• Have the clamping joints correctly installed by a qualified electrician.

• Use strain relief clamp on cable.

• In the event of single-phase or two-phase connection, the appropriate

mains cable of type H05BB-F Tmax 90° (or higher) must be used.

• If this appliance’s mains cable is damaged, it must be replaced by a spe-

cial cable (type H05BB-F Tmax 90°; or higher). The latter is available from

the Customer Care Department.

19

A device must be provided in the electrical installation which allows the ap-

pliance to be disconnected from the mains at all poles with a contact open-

ing width of at least 3 mm.

Suitable isolation devices include line protecting cut-outs, fuses (screw type

fuses are to be removed from the holder), earth leakage trips and contac-

tors.

Sticking on the seal

• Clean the worktop around the cut-out area.

• Stick the single-sided adhesive sealing tape provided on the underside of

the hob around the outside edge ensuring that it is not stretched. The two

ends of the tape should join in the middle of one side. After trimming the

tape (allow it to overlap by 2-3 mm), press the two ends together.

20

Customer Service Centres

Singapore

Electrolux SEA Pte Ltd

10 Toh Guan Road, # 07-01 TT International Tradepark

Singapore 608838

Tel: + 65 7616200

Malaysia

Electrolux Home Appliances Sdn Bhd

Axis Plaza, level 2

No 5, Jalan Penyair U1 / 44

Seksyen U1, 40150 Shah Alam

Selangor Darul Ehsan

Tel: + 603 55691222

Indonesia

PT. Electrolux Indonesia

Customer Care & Service Centre

Electrolux Building

Jl. KH. Hasyim Ashari No. 17

Jakarta 10130

Indonesia

Tel: + 6221 6328025, 6331350

Vietnam

Electrolux Vietnam Ltd

133 Thai Ha Road

Hanoi, Vietnam

Tel: + 844 8574882

Thailand

Page is loading ...

Electrolux EHS6620P 89L User manual

Electrolux EHS6620P 89L User manual

in other languages

Related papers

Other documents