Panasonic SV-AS3 User manual

Before use, please read these instructions

completely.

Operating Instructions

SD Multi Camera

Model No. SV-AS3

VQT0Q47

GC GCS GN

VQT0Q47Eng.book 1 ページ２００４年１１月２６日　金曜日　午前１０時１２分

2

VQT0Q47

Preparation

Information for Your Safety............... 4

Introduction ....................................... 6

Accessories ...................................... 8

Suitable Card .................................... 9

Controls Layout............................... 10

Inserting/Removing the Battery

or the Card .................................. 12

Charging the Battery....................... 14

Turning This Unit On....................... 16

Switching the Mode ........................ 17

How To Set the Menu ..................... 18

Setup Menu .................................... 20

Setting the Clock............................. 22

Shortcut Menu ................................ 24

Recording

Before Recording............................ 25

Recording ....................................... 26

Approximate Number of

Recordable Pictures and Time

...... 29

Changing the Picture Size

and Quality.................................. 31

Enlarging Pictures (Digital Zoom)

...... 33

Setting the Flash............................. 34

Recording with the Self-timer.......... 36

Adjusting the Colour to

Natural Tone (White Balance)..... 37

Recording in Dark Places

(Night Mode) ............................... 38

Compensating the Exposure .......... 39

Setting the ISO Sensitivity .............. 40

Playback

Playback ......................................... 41

Adjusting Volume ............................ 44

6 Pictures Multi Playback

(Thumbnail Display) .................... 44

Playing Motion Images Repeatedly

(Repeat Playback)....................... 45

Deleting Files .................................. 45

Preventing Accidental Erasure

of Files (Lock Setting).................. 47

Enlarging Pictures (Target Zoom)

..... 48

Registering Still Pictures

as “Favourite” .............................. 49

Creating a Slide Show with Audio

..... 50

Playing Still Pictures

on the Slide Show ....................... 52

Printing Pictures Directly Connecting

to a Printer (PictBridge) ............... 53

Setting Still Pictures to be Printed

and the Number of Prints

(DPOF Print)................................ 56

Playing Music

Playing Music.................................. 59

Selecting Playlists ........................... 63

Playing Repeatedly

(Repeat Playback)....................... 64

Contents

VQT0Q47Eng.book 2 ページ２００４年１１月２６日　金曜日　午前１０時１２分

3

VQT0Q47

Connecting to PC

Operating Environment

of the Software ............................ 65

Before Connecting to a PC

for the First Time (Installation)

...... 68

Installing the USB Driver ................. 69

Installing SD Viewer ........................ 69

Installing SD-Jukebox ..................... 71

Connecting to a PC ......................... 72

Checking that This Unit Is

Properly Recognised by the PC

..... 74

Disconnecting the USB Cable

Safely........................................... 75

Folder Structure of the Card Used

for This Unit ................................. 76

Using Files in a Card on a PC

([Picture] • [MPEG4]) ................... 77

Playing Copied Files

([Picture] • [MPEG4]) ................... 77

Using SD Viewer ............................. 79

Using SD-Jukebox .......................... 81

Reading Operating Instructions

of the Software ............................ 82

Uninstalling the Software ................ 83

Cautions for Use

This Unit .......................................... 84

The AC Adaptor .............................. 85

The Battery...................................... 86

Charging Error................................. 87

Condensation .................................. 88

LCD Monitor .................................... 89

Card ................................................ 90

Recorded Files ................................ 90

Format............................................. 91

Demonstration Mode ....................... 91

Others

Screen Display ................................ 92

Messages ........................................ 94

Trouble Shooting (Q&A) .................. 95

Specifications................ 100

End User License

Agreement ................. 103

VQT0Q47Eng.book 3 ページ２００４年１１月２６日　金曜日　午前１０時１２分

4

VQT0Q47

Information for Your Safety

WARNING

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND

ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED

ACCESSORIES AND DO NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE. DO NOT REMOVE THE COVER (OR BACK);

THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE

EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by

the manufacturer.

Dispose of used batteries according to the manufacturer’s

instructions.

Preparation

VQT0Q47Eng.book 4 ページ２００４年１１月２６日　金曜日　午前１０時１２分

5

VQT0Q47

IMPORTANT

Please respect all copyrights.

Whatever you have recorded and created can be used for your

personal entertainment only. Under copyright laws, other

materials cannot be used without obtaining permission from the

holders of the copyrights.

≥ Injury or material damage resulting from any kind of use that is

not in accordance with the operating instructions are the sole

responsibility of the user.

≥ If the SD Multi Camera is used continuously for a long time or used

at a high ambient temperature, red, blue, green or white dots may

appear on the screen and be recorded on a still picture. This is due

to the rise of the temperature inside the body. This is not a

malfunction. Under this condition, turn the SD Multi Camera off and

leave it for a while.

≥ The manufacturer shall in no event be liable for the loss of recordings

due to malfunction or defect of this SD Multi Camera, its accessories

or Memory Card.

≥ Please note that the actual controls and components, menu items,

etc. of your SD Multi Camera may look somewhat different from

those shown in the illustrations in these Operating Instructions.

≥ In this Operating Instructions, “Memory Card” and “Card” mean

“SD Memory Card”.

≥ Note that the SD Multi Camera may not play the data recorded or

created on another product and another product may not play the

data recorded on the SD Multi Camera.

≥ The nameplate of the SD Multi Camera is fixed on the bottom of the

battery compartment.

VQT0Q47Eng.book 5 ページ２００４年１１月２６日　金曜日　午前１０時１２分

6

VQT0Q47

Dear Customer,

We would like to take this opportunity to thank you for purchasing this

Panasonic SD Multi Camera. Please read these Operating Instructions

carefully and keep them handy for future reference.

≥ SD logo is a trademark.

≥ MPEG Layer-3 audio decoding technology licensed from Fraunhofer

IIS and Thomson multimedia.

≥ This product is licensed under the MPEG-4 patent portfolio license

for the personal and non-commercial use of a consumer to (i)

encode video in compliance with the MPEG-4 Video Standard

(“MPEG-4 Video”) and/or (ii) decode MPEG-4 Video that was

encoded by a consumer engaged in a personal and non-commercial

activity and/or was obtained from a licensed video provider. No

license is granted or implied for any other use. Additional information

may be obtained from MPEG LA. See http://www.mpegla.com

.

≥ Microsoft, Windows and Windows Media are

either registered trademarks or trademarks of

Microsoft Corporation in the United States and/

or other countries.

≥ Adobe, Adobe Acrobat and Acrobat Reader are

trademarks or registered trademarks of Adobe Systems

Incorporated in the United States and/or other countries.

≥ WMA is a compression format developed by Microsoft Corporation. It

achieves the same sound quality as MP3 with a file size that is

smaller than that of MP3.

≥ This unit is not compatible with Multiple Bit Rate (MBR: a file that

contains the same content encoded at several different bit rates).

Introduction

Preparation (continued)

VQT0Q47Eng.book 6 ページ２００４年１１月２６日　金曜日　午前１０時１２分

7

VQT0Q47

≥ Music recognition technology and related data are

provided by Gracenote and the Gracenote CDDB

music recognition service. Gracenote is the industry

standard in music recognition technology and related

content delivery. For more information visit

www.gracenote.com

.

≥ CD and music-related data from Gracenote, Inc., copyright C 2000–

2003 Gracenote. Gracenote CDDB

®

Client Software, copyright

2000–2003 Gracenote. This product and service may practice one or

more of the following U.S. Patents: #5,987,523, #6,061,680,

#6,154,773, #6,161,132, #6,230,192, #6,230,207, #6,240,459,

#6,330,593, and other patents issued or pending.

≥ Gracenote

®

and CDDB

®

are registered trademarks of Gracenote.

The Gracenote logo and logotype, the Gracenote CDDB logo and

logotype and the “Powered by Gracenote” logo are trademarks of

Gracenote.

≥ Portions of this product are protected under copyright law and are

provided under license by ARIS/SOLANA/4C.

≥ Other names of systems and products mentioned in these Operating

Instructions are usually the registered trademarks or trademarks of

the manufacturers who developed the system or product concerned.

≥ The ™ and

®

marks are not used to identify registered trademarks

and trademarks in these instructions.

≥ The contents or complete reproduction or copy of these Operating

Instructions could be changed without notice.

≥ Licensed AAC Patents (U.S. patent numbers);

08/937,950

5848391

5,291,557

5,451,954

5 400 433

5,222,189

5,357,594

5,752,225

5,394,473

5,583,962

5,274,740

5,633,981

5 297 236

4,914,701

5,235,671

07/640,550

5,579,430

08/678,666

98/03037

97/02875

97/02874

98/03036

5,227,788

5,285,498

5,481,614

5,592,584

5,781,888

08/039,478

08/211,547

5,703,999

08/557,046

08/894,844

5,299,238

5,299,239

5,299,240

5,197,087

5,490,170

5,264,846

5,268,685

5,375,189

5,581,654

05-183,988

5,548,574

08/506,729

08/576,495

5,717,821

08/392,756

VQT0Q47Eng.book 7 ページ２００４年１１月２６日　金曜日　午前１０時１２分

8

VQT0Q47

Accessories

Check the accessories before using this unit.

SD Memory Card is not included.

Battery Pack Stereo earphones

L0BAB0000180

AC adaptor

VSK0670 (GC)

VSK0670A (GCS)

VSK0669 (GN)

Hand strap

VFC4012

AC mains lead

A

K2CR2DA00004

(GC/GCS)

B

K2CJ2DA00011

(GN)

Carrying case

VFC4081

USB cable

K2KZ4CB00008

Cleaning Cloth

VFC1792

CD-ROM Remote controller

N2QCBD000045

A

B

Preparation (continued)

VQT0Q47Eng.book 8 ページ２００４年１１月２６日　金曜日　午前１０時１２分

9

VQT0Q47

∫ Optional Accessory

≥ Battery Pack (CGA-S302E/1B)

≥ The card suitable for this unit is SD Memory Card. (MultiMediaCard

is not suitable.)

≥ We recommend using Panasonic SD Memory Card.

∫ About SD Memory Card (optional)

≥ The SD Memory Card is a small, lightweight and

removable external card. The SD Memory Card is

equipped with a write-protect switch 1 that can

inhibit writing and formatting. (When the switch is

moved towards the LOCK side, it is not possible to

write or delete data on the card and format it. When

the switch is unlocked, these functions become available.)

≥ Pictures recorded onto the SD Memory Card can be played on

Panasonic DVD Video Recorder with a SD Memory Card slot, etc.

(Depending on the file, pictures cannot be played in some cases.)

≥ Motion images (MPEG4 format) recorded with DVD Video Recorder

can be played on this unit.

• [MPEG4] files (ASF format) recorded by this unit may not be played

on Panasonic MPEG4 motion image player. In this case, the files

may be played by installing SD Viewer 3.2E for D-snap in the

CD-ROM (supplied) and converting the files using [MPEG4

Converter].

• The available recording methods (file formats) vary depending on the

model. For details on the available models, recording methods, etc.,

carefully check the catalogue, the website or the operating

instructions of the equipment.

Suitable Card

1

VQT0Q47Eng.book 9 ページ２００４年１１月２６日　金曜日　午前１０時１２分

10

VQT0Q47

∫ Body

1Lens

2 Strap Attachment

3 Microphone (P28)

4 Self-timer Lamp (P36)

5 Flash

6 LCD Monitor (P92)

7 Jog Ball (P18)

• It is used for setting the menu, playing

files, zooming, etc.

• It blinks (lights) in red (Recording Mode)

or green (Playback Mode) when you

switch the mode, operate the menu or

turn this unit on.

8 Shutter Button [¥] (P27)

9 Volume Button [s/r] (P44)

10 Power/Charge/Card Access Lamp

(P16)

11 MODE Button [MODE] (P18)

• It is also used to prevent operation

mistake during playback in [Voice] or

[Audio] mode. (P62)

12 MENU Button [MENU] (P18)

• It is also used to display the shortcut

Menu. (P24)

13 Buzzer

• The operational sounds emerge from the

speaker.

14 DC Input Terminal [DC IN 4.8V] (P14)

15 Power Switch (P16)

16 Record/Playback Mode Switch

[ / ] (P17, 26, 41)

17 Terminal (remote controller) [ ]

18 USB Terminal [USB] (P53, 72)

Controls Layout

1

2

3

4

6

7

8

9

14

15

16

5

10

11

12

17

18

13

Preparation (continued)

VQT0Q47Eng.book 10 ページ２００４年１１月２６日　金曜日　午前１０時１２分

11

VQT0Q47

19 Battery Lock [OPEN] (P12)

20 Card Slot (P13)

21 Card/Battery Door (P12)

22 Lock Release Lever (P13)

23 Battery Slot (P13)

∫ Remote Controller (P27, 61)

1 Stereo Earphone Socket

2 Volume Button [s VOL r]

3 Playback/Stop Button [1/∫]

Shutter Button [¥]

4 Fast-forward Button [9]

5 Fast-rewind Button [:]

6 Hold Switch [1HOLD]

• It locks buttons on the remote controller.

7 Equaliser Button [EQ]

∫ Stereo Earphones (P60)

≥ When you use earphone, be sure to

connect to the remote controller (supplied).

≥ If you use earphones other than the stereo

earphones (supplied), use 2 m or less

length of earphones (3 m or less including

the remote controller).

1 Stereo Earphones (supplied)

2 Remote Controller (supplied)

20

23

2221

19

2

3

4

5

6

7

1

2

VQT0Q47Eng.book 11 ページ２００４年１１月２６日　金曜日　午前１０時１２分

12

VQT0Q47

1 Open the Card/Battery Door at the bottom of this unit.

• Release the lock and then open the Door while sliding it.

2 Insert/remove the battery or the card.

• Read the next page carefully.

3 Close the Card/Battery Door.

• Close the Door and then lock it while sliding.

≥ Never open the Card/Battery Door during the access. (P16)

Otherwise, the data on the card may be damaged.

≥ When the Card/Battery Door cannot be completely closed, remove

the card or battery once and then insert it again.

≥ When you do not use the SD Multi Camera for a long time, remove

the battery.

≥ Do not use the supplied battery for other equipment.

≥ Please be sure to use genuine Panasonic batteries

(CGA-S302E/1B).

Inserting/Removing the Battery or the Card

Be sure to turn this unit off before the following operations.

Preparation (continued)

VQT0Q47Eng.book 12 ページ２００４年１１月２６日　金曜日　午前１０時１２分

13

VQT0Q47

∫ When inserting the card/battery

Confirm the direction of the battery and the card.

Insert the battery fully into the slot with the Battery Lock 1 lowered.

Check if the Battery Lock is hooked on the Battery 2.

≥ Place the battery with the label side upward. A

≥ Insert the battery in the direction indicated by the arrow. B

3 Label 4 Notch

• Insert the card/battery fully and firmly.

(The card clicks if it is fully inserted.)

• Do not touch the connecting terminal on the rear of the card.

• If the Battery Lock is not hooked on the battery or you have difficulty

in closing the Card/Battery Door, the battery may be inserted in a

wrong direction. Pull the battery out with the Battery Lock unlocked

and check the direction of the battery.

∫ When removing the card/battery

1

A

B

2

4

3

2

1

Point the bottom of the unit

downwards with the door open. Lift

the Battery Lock 1, then remove the

battery.

Press the card until it

clicks and then pull out

the card.

VQT0Q47Eng.book 13 ページ２００４年１１月２６日　金曜日　午前１０時１２分

14

VQT0Q47

1 Connect the AC mains lead to the AC adaptor and the

AC mains socket, then connect the DC plug to this

unit.

• The AC mains lead does not fit entirely into the AC adaptor socket. A

gap will remain as shown 1.

• The Charge Lamp 2 blinks and the charging starts.

• When charging is completed (the battery is fully charged in about

160 minutes), the charge lamp turns off.

Charging the Battery

Be sure to turn this unit off before the charging the battery. (When

this unit is turned on, the battery cannot be charged.) Use the AC

adaptor supplied for this unit.

2

1

Preparation (continued)

VQT0Q47Eng.book 14 ページ２００４年１１月２６日　金曜日　午前１０時１２分

15

VQT0Q47

∫ Charging time and the number of recordable pictures/

time (per a battery)

≥ Temperature: 23oC/Humidity: 50%

≥ Using the supplied battery and optional SD Memory Card (256 MB/

RP-SDH256)

≥ CIPA is an abbreviation of “Camera & Imaging Products

Association”.

≥ The times (numbers) shown above may vary depending on the

condition.

≥ The optional battery pack CGA-S302E/1B is also available.

∫ Environment for charging

≥ Charge the battery under temperature of 10–35oC. (The temperature

of the battery should be the same.)

≥ When the battery is normally charged, the charge lamp blinks once

every about 2 seconds. (It turns on about 1 second and turns off

about 1 second.) If the charge lamp blinks faster than above, this is a

malfunction. Refer to P87 for countermeasures for this case.

Charging time Approx. 160 minutes

The number of

recordable

pictures

[Picture]

Approx. 260 pictures

(Recording conditions by CIPA standards)

Continuous

recording time

[MPEG4]

Approx. 140 minutes

When the supplied

stereo earphones

are used

Continuous

playback time

[MPEG4]

Approx. 300 minutes

[Audio]

Approx. 40 hours

VQT0Q47Eng.book 15 ページ２００４年１１月２６日　金曜日　午前１０時１２分

16

VQT0Q47

≥ The battery is warmed during and after charging. The SD Multi

Camera is also warmed during the operation, however, it is not a

malfunction.

≥ When you do not use this unit, disconnect the DC plug from this unit

and disconnect the AC mains lead from the electrical outlet.

1 Slide the Power Switch to [ON].

• This unit is turned off when you slide the Power Switch to [OFF].

∫ Power/Charge/Card Access Lamp 1

• When the Power/Charge/Card Access Lamp is blinking, do not turn

the power off or do not remove the battery and the card. Otherwise,

the card or its contents may be damaged, or the SD Multi Camera

may not work properly.

• The Power/Charge/Card Access Lamp also blinks when charging the

battery (P14).

Turning This Unit On

Lighting

This unit is turned on. (The Power/Charge/Card

Access Lamp is turned off when this unit is turned

off.)

Blinking

This unit is accessing to the card.

(For recognising/recording/reading/deleting, etc.)

1

Preparation (continued)

VQT0Q47Eng.book 16 ページ２００４年１１月２６日　金曜日　午前１０時１２分

17

VQT0Q47

∫ Battery indicator

≥ It is displayed on the LCD Monitor (P92) when this unit is turned on.

≥ As the remaining battery power is decreased, the indicator is

changed as >>(blinking). When the indicator

is shown as (blinking), the battery will be exhausted in a few

minutes. Charge the battery.

≥ The indication of the remaining battery power may be increased or

decreased depending on each mode. Check the indicator every time

you switch the mode.

≥ If the battery is excessively discharged, the message “INSERT

BATTERY” may appear even if the battery is inserted in this unit or

the USB connection with the PC may not be possible. Charge the

battery before use.

1 Slide the Record/Playback Mode Switch to the desired

mode.

• [ ]: When recording

• [ ]: When playing files recorded on the card

Switching the Mode

VQT0Q47Eng.book 17 ページ２００４年１１月２６日　金曜日　午前１０時１２分

18

VQT0Q47

2 Press the [MODE] button 1, and then roll the Jog Ball

2 to select the mode.

– The selected icon is enlarged.

• When the [MODE] button is tapped without a card in this unit, the

demonstration mode (P91) is activated.

3 Press the Jog Ball to set.

• Refer to P26 for the modes in the recording mode and refer to P41

for the modes in the playback mode.

1 Press the [MENU] button 1.

– The menu screen appears.

How To Set the Menu

Turn this unit on and select the desired mode beforehand. (P16–17)

The available items depends on the mode.

PicturePicture

EXIT

MPEG4MPEG4

1

2

EXITMENU

1

Preparation (continued)

VQT0Q47Eng.book 18 ページ２００４年１１月２６日　金曜日　午前１０時１２分

19

VQT0Q47

2 Roll the Jog Ball 2 to select the sub-menu, and then

press the Jog Ball to set.

– The sub-menu screen appears.

3 Roll the Jog Ball to select the desired item, and then

press the Jog Ball to set.

– The setting is changed and the menu screen disappears.

• If you have other items to select, repeat Step 3.

≥ To stop the operation, press the [MENU] button.

≥ If the Jog Ball is left without any operation for about 30 seconds, the

unit exits the menu automatically.

≥ When you press the [MENU] button for about 1 second, the shortcut

menu appears. (P24)

Flash

EXITMENU

Auto

EXITMENU

2

Flash off

EXITMENU

VQT0Q47Eng.book 19 ページ２００４年１１月２６日　金曜日　午前１０時１２分

20

VQT0Q47

1 Press the [MENU] button and then set the desired

items with the Jog Ball. (P18)

∫ Setting on the operation sound

∫ Setting on the Jog Ball

≥ The response speed of the Jog Ball is not changed when you select

pictures and move between thumbnails or list display in the playback

mode.

Setup Menu

You can change the settings on this unit in the menu.

Setup

l

Select the following items for the settings.

Volume

l

Beep ON

Turns on the operation

sound.

Beep OFF

Turns off the operation

sound.

Main volume

Adjusts the volume of the

stereo earphones.

Sensitivity

(Jog Ball)

l

Normal

This is normal response

speed of the Jog Ball.

Fast

The response of the Jog

Ball becomes fast.

Slow

The response of the Jog

Ball becomes slow.

Preparation (continued)

VQT0Q47Eng.book 20 ページ２００４年１１月２６日　金曜日　午前１０時１２分

Page is loading ...

Panasonic SV-AS3 User manual

This manual is also suitable for

Panasonic SV-AS3 User manual

Related papers

Other documents