Dorel Home DL1010-1 User manual

Type
User manual

This manual is also suitable for

Model Number: UPC Code: Color:
DL1010-1 0-65857-17161-7 WHITE
Date of Purchase: _____ / _____ / _____ Lot Number:
(taken from carton)
6-Drawer Dresser
Congratulations on your latest furniture purchase! Dorel Living furniture has been developed with
quality, convenience and style in mind. We trust it will provide you with many years of exceptional
comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your new furniture piece by
taking a few minutes to go through this booklet. It contains important information on our warranty and
care tips to keep your furniture looking as good as new.
Customer satisfaction is important to us at Dorel Asia. Our agents are available Monday to Friday
8am to 5pm (EST) to answer any question you may have. For faster service, always have the model
number ready when calling our toll free number 1-800-295-1980 or emailing us at d[email protected] .
For more great furniture ideas, check out our website at www.dorelliving.com
You can also keep up to date on all the latest trends by liking our Facebook page.
DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact
our customer service department. We will replace the part FREE of charge.
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture
can damage wood furniture.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Dorel warrants its product to be free from defects in material and workmanship and agrees
to remedy any such defect. This warranty covers 1 year from the date of original purchase.
This warranty is valid only upon presentation of proof of purchase. This is solely limited to
the repair or replacement of defective furniture components and no assembly labor is
included. This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
This warranty gives you specific legal rights and you may also have other rights which vary
from State to State.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
* Unless specifically designed to accommodate, do not set TVs or other heavy objects on
top of this product.
* Never allow children to climb or hang on drawers, doors or shelves.
* Never open more than one drawer at a time.
* Do not defeat or remove the drawer interlock system.
* Use of tipover restraints may only reduce, but not eliminate, the risk of tipover.
CARE AND CLEANING
* To avoid unnecessary damage, when levelers have been extended, DO NOT drag across
surface when moving. Be sure to lift and carry the item to its location.
* Estimated assembly time: 60 minutes.
WARNING
Serious or fatal crushing injuries can occur from furniture tipover. To help prevent
tipover:
* Install tipover restraint provided.
* Place heaviest items in the lower drawers.
* Assemble on a soft, smooth surface to prevent damage to the product finish.
* Use the wall safety strap provided to secure the unit to the wall.
* A Phillips head screw driver is not included.
* DO NOT use power tools.
* CAUTION: Adult assembly required.
* Assembly will require two people.
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
NOTES
* Ensure all parts and components are present before beginning assembly.
CUSTOMER SERVICE
If you have any questions about this product, contact our customer service representative
first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413
HARDWARE LIST
1 2 3
4 5 6
7 8 9
10 11 12
13 14
ALLEN KEY
1 PC
SAFETY STRAP
1 KIT
SMALL BOLT
6 PCS
LARGE BOLT
1 PC
Ø5/32" X 7/8"
Ø1/4" X 35 mm
SMALL WOOD DOWEL
20 PCS
LARGE WOOD DOWEL
23 PCS
ROUND HEAD SCREW
14 PCS
FLAT HEAD SCREW
28 PCS
SMALL CAM LOCK
24 PCS
Ø3 X 15 mm
6-Drawer Dresser
DL1010-1
KNOB
6 PCS
Ø4 X 25 mm
Ø8 X 30 mm
Ø6 X 20 mm
Ø7 X 36 mm
Ø13 X 10 mm
LARGE CAM BOLT
18 PCS
ADJUSTABLE LEVELER
3 PCS
Ø15 X 11 mm
LARGE CAM LOCK
18 PCS
Ø7 X 28 mm
SMALL CAM BOLT
24 PCS
Ø1/4"
A B C
D E F
G H I
J K L
BACK BOTTOM PANEL
1 PC
SMALL DRAWER LEFT SIDE
2 PCS
SMALL DRAWER RIGHT
SIDE
2 PCS
6-Drawer Dresser
DL1010-1
RIGHT SIDE FRAME
1 PC
TOP PANEL
1 PC
LEFT SIDE FRAME
1 PC
LARGE DRAWER RIGHT
SIDE
4 PCS
SMALL DRAWER BACK
2 PCS
LARGE DRAWER LEFT SIDE
4 PCS
MIDDLE PANEL
1 PC
TOP RAIL
2 PCS
FRONT BOTTOM RAIL
1 PC
STEP 1
6-Drawer Dresser
DL1010-1
Insert large cam bolts (4) into the front bottom rail (F), back bottom panel (G), left side
frame (B) and right side frame (C) as shown.
STEP 2
6-Drawer Dresser
DL1010-1
Insert large cam locks (3) into the middle panel (D) as shown.
Attach rails (E & F) and back bottom panel (G) to the middle panel (D) with large wood
dowels (1) as shown below.
Secure rail (F) and back bottom panel (G) to the middle panel (D) by rotating the large
cam locks (3) on middle panel (D) 1/2 turn clockwise using a Phillips head screwdriver
(not included).
STEP 3
6-Drawer Dresser
DL1010-1
Insert large wood dowels (1) into the left side frame (B).
Insert large cam locks (3) into the top rails (E), front bottom rail (F) and back bottom panel (G).
Secure the left side frame (B) to the assembled unit by rotating large cam locks (3) on the top
rails (E) front bottom rail (F) and back bottom panel (G) 1/2-turn clockwise using a Phillips head
screwdriver (not included).
Install the adjustable leveler (12) to the left side frame (B) as shown.
STEP 4
6-Drawer Dresser
DL1010-1
Insert large wood dowels (1) into support panel (V). Attach support panel (V) to the assembled
unit as shown.
Secure the support panel (V) to the middle panel (D) with large bolt (11) as shown. Use Allen
key (13) to tighten the bolt.
Install the adjustable leveler (12) to the support panel (V) as shown.
STEP 5
6-Drawer Dresser
DL1010-1
Insert large wood dowels (1) into the right side frame (C).
Insert large cam locks (3) into the rails (E & F) and back bottom panel (G).
Secure the right side frame (C) to the assembled unit by rotating cam locks (3) on the top rails
(E), front bottom rail (F) and back bottom panel (G) 1/2-turn clockwise using a Phillips head
screwdriver (not included).
Install the adjustable leveler (12) to the right side frame (C) as shown.
STEP 6
6-Drawer Dresser
DL1010-1
Insert large cam bolts (4) into the top panel (A).
STEP 7
6-Drawer Dresser
DL1010-1
Insert large wood dowels (1) into the left side frame (B), middle panel (D) and right side
frame (C) as shown below.
Insert large cam locks (3) into the side frames (B & C) and middle panel (D).
Place the top panel (A) on the assembled unit.
Rotate large cam locks (3) on the side panels (B & C) and middle panel (D) 1/2-turn
clockwise to secure the top panel (A).
Further secure top panel (A) with flat head screws (8) through rails (E) and middle panel
(D). Use a Phillips head screwdriver (not included) to tighten the screws.
STEP 8
6-Drawer Dresser
DL1010-1
Attach back panel (U) to the assembled frame with round head screws (7).
Use a Phillips head screwdriver (not included) to tighten the screws.
STEP 9
6-Drawer Dresser
DL1010-1
Insert small cam bolts (6) and small wood dowels (2) into the left top drawer front panel
(O).
Insert small cam locks (5) into the small drawer left side (H) and small drawer right side (I).
Attach drawer sides (H & I) to the left top drawer front panel (O). Secure the drawer sides
(H & I) by rotating small cam locks (5) 1/2-turn clockwise using a Phillips head screwdriver
(not included).
Slide the drawer bottom (M) into the grooves of drawer sides (H & I) and left top drawer
front panel (O).
STEP 10
6-Drawer Dresser
DL1010-1
Attach small drawer backs (J) to the drawer sides (H & I) with flat head screws (8).
Use a Phillips head screwdriver (not included) to tighten the screws.
Attach knobs (9) into the left top drawer front panel (O) with bolts (10).
Use a Phillips head screwdriver (not included) to tighten the bolts.
Repeat steps 9 and 10 to assemble the right top drawer using right drawer front (P).
STEP 11
6-Drawer Dresser
DL1010-1
Insert small cam bolts (6) and small wood dowels (2) into the left middle drawer front
panel (Q).
Insert small cam locks (5) into the large drawer left side (K) and large drawer right side
(L).
Attach large drawer sides (K & L) to the left middle drawer front panel (Q). Secure the
drawer sides by rotating small cam locks (5) 1/2-turn clockwise using a Phillips head
screwdriver (not included).
Slide the drawer bottom (M) into the grooves of large drawer sides (K & L) and left middle
drawer front panel (Q).
STEP 12
6-Drawer Dresser
DL1010-1
Attach large drawer backs (N) into the drawer sides (K & L) with flat head screws (8).
Use a Phillips head screwdriver (not included) to tighten the screws.
Attach knobs (9) to the left middle drawer front panel (Q) with bolts (10).
Use a Phillips head screwdriver (not included) to tighten the bolts.
Repeat steps 11-12 to assemble the other drawers using right drawer fronts (R,S and
T).
STEP 13
6-Drawer Dresser
DL1010-1
Insert all drawers into the assembled unit as shown.
That's it! You've finished assembling your 6-drawer dresser!
DL1010-1
6-Drawer Dresser
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: 1-800-295-1980
Fax #: 514-353-7819
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
Furniture Wall Safety Strap
A B C D
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR CUSTOMER SERVICE NUMBER: 1-800-295-1980.
Step 1:
Step 2:
ATTACH A MOUNTING BRACKET (A) SECURELY TO THE BACK EDGE OF THE FURNITURE USING THE SHORT SCREW (D),
THROUGH THE SMALLER HOLE
PLACE THE FURNITURE INTO POSITION SO BOTH MOUNTING BRACKETS ARE VERTICALLY IN LINE. LACE THE END OF THE
SAFETY WALL STRAP (B) THROUGH THE LARGER HOLE IN EACH MOUNTING BRACKET (A). BRING BOTH ENDS TOGETHER AND
SLIDE THE FLAT END THROUGH THE LOCKING END AND DRAW IT THROUGH UNTIL ALL SLACK IS REMOVED.
CONFIRM THAT THE STRAP IS SECURELY LACED AND LOCKED.
Step 3:
Step 4:
LOCATE THE OTHER MOUNTING BRACKET (A) ON THE WALL OVER A WALL STUD AND 2 INCHES BELOW THE MOUNTING
BRACKET SECURED TO THE BACK OF YOUR UNIT. ATTACH TO THE WALL STUD USING THE LONG SCREW (C) PROVIDED,
THROUGH THE SMALLER HOLE.
TO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN INSTALLED, SIMPLY
REMOVE THE SCREW FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.
MOUNTING BRACKET
4 PCS
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE
FURNITURE MAY TIP OVER. PLEASE INSTALL THE SAFETY
WALL STRAP BEHIND THE FURNITURE TO ENSURE SAFETY.
SHORT SCREW
2 PCS
LONG SCREW
2 PCS
SAFETY WALL STRAP
2 PCS
MODEL #: DL1010-1
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer Service
Customer Service Representative Mailing Address:
Customer Service Phone Number 1-800-295-1980
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63

Dorel Home DL1010-1 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI