Gossen MetraWatt R0300 Operating instructions

Type
Operating instructions

Gossen MetraWatt R0300 is a multi-channel controller that comes with essential safety features and precautions. It is manufactured and tested in accordance with safety regulations IEC 61010-1 / DIN EN 61010-1 / VDE 0411-1 to ensure the safety of the user and the device when used for its intended purpose. The device should not be used if there is visible damage, malfunctioning, or after long periods of storage under unfavorable conditions like humidity, dust, or extreme temperatures.

The R0300 offers various capabilities, including:

  • Monitoring and controlling electrical systems within specified nominal ranges

Gossen MetraWatt R0300 is a multi-channel controller that comes with essential safety features and precautions. It is manufactured and tested in accordance with safety regulations IEC 61010-1 / DIN EN 61010-1 / VDE 0411-1 to ensure the safety of the user and the device when used for its intended purpose. The device should not be used if there is visible damage, malfunctioning, or after long periods of storage under unfavorable conditions like humidity, dust, or extreme temperatures.

The R0300 offers various capabilities, including:

  • Monitoring and controlling electrical systems within specified nominal ranges
Operating Instructions
Multi-channel Controller R0300
3-348-585-03
9/1.15
Safety Features and Precautions
The R0300 controller is manufactured and tested in accordance
with safety regulations IEC 61010-1 / DIN EN 61010-1 /
VDE 0411-1.
If used for its intended purpose, safety of the user and of the
device is assured.
Read the operating instructions completely and carefully before using the
device, and follow all instructions included therein. The operating
instructions should be made available to all users.
Observe the following safety precautions:
The device may only be connected to electrical systems
which comply with the specified nominal range of use (see
circuit diagram and serial plate), and which are protected with
a fuse or circuit breaker with a maximum nominal current
rating of 16 A.
The installation must include a switch or a circuit breaker
which serves as a disconnecting device.
The controller may not be used:
If visible damage is apparent
If it no longer functions flawlessly
After lengthy periods of storage under unfavorable conditions
(e.g. humidity, dust, temperature)
In such cases the device must be removed from service and
secured against any possible inadvertent use.
Maintenance
Housing
No special maintenance is required for the housing. Keep outside
surfaces clean. Use a slightly dampened cloth for cleaning. Avoid
the use of solvents, cleansers and abrasives.
Repair and Parts Replacement
Repair and replacement of parts conducted at a live open inst-
rument may only be carried out by trained personnel who are
familiar with the dangers involved.
Device Return and Environmentally Compatible Disposal
The R0300 is a category 9 product (monitoring and control inst-
rument) in accordance with ElektroG (German Electrical and Elec-
tronic Device Law). This device is subject to the RoHS directive.
Furthermore,we make reference to the fact that the current status
in this regard can be accessed on the Internet at
www.gossenmetrawatt.com by entering the search term WEEE.
We identify our electrical and electronic devices in
accordance with WEEE 2012/19EU and ElektroG with the
symbol shown to the right per DIN EN 50419.
These devices may not be disposed of with the trash. Please
contact our service department regarding the return of old
devices.
Repair and Replacement Parts Service
If required please contact:
GMC-I Service GmbH
Service-Center
Thomas-Mann-Str. 20
90471 Nürnberg • Germany
Phone +49 911 817718-0
Fax +49 911 817718-253
E-Mail service@gossenmetrawatt.com
www.gmci-service.com
This address is only valid in Germany. Please contact our
representatives or subsidiaries for service in other countries.
Product Support
If required please contact:
GMC-I Messtechnik GmbH
Product Support Hotline – Industrial Division
Phone +49 911 8602-500
Fax +49 911 8602-340
E-Mail support.industrie@gossenmetrawatt.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80

Gossen MetraWatt R0300 Operating instructions

Type
Operating instructions

Gossen MetraWatt R0300 is a multi-channel controller that comes with essential safety features and precautions. It is manufactured and tested in accordance with safety regulations IEC 61010-1 / DIN EN 61010-1 / VDE 0411-1 to ensure the safety of the user and the device when used for its intended purpose. The device should not be used if there is visible damage, malfunctioning, or after long periods of storage under unfavorable conditions like humidity, dust, or extreme temperatures.

The R0300 offers various capabilities, including:

  • Monitoring and controlling electrical systems within specified nominal ranges

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI