Diamond Mesh Lath
*With the exception of Utility Diamond Mesh Lath.
The information and recommendations contained herein are, to the best of Phillips Manufacturing Company’s knowledge and belief, accurate and reliable as of the date issued. Phillips Manufacturing Company has no
control over the conditions of handling and use, and makes no warranty regarding the results obtained from the use of this data. The information and recommendations are offered for the user’s consideration and
examination, and it is the user’s responsibility to determine that they are suitable and complete for its particular use. Phillips reserves the right to make alterations and amendments to the detailed specifications at its
discretion. Phillips disclaims responsibility for all actions, proceedings, liabilities, claims, damages, cost, losses, and expenses in relation to, or arising out of, incorrect utilization of this information.
Version 1.4 / Page 1 of 1
©2012 Phillips Manufacturing Company
Diamond Mesh Lath
Self-Furring Diamond Mesh Lath
Product Benefits
Phillips Diamond Mesh Lath is used as a plaster base and
reinforcement on almost all types of walls and ceilings, over wood or
steel framing, flat or curved surfaces. Phillips Self-Furring Diamond
Mesh is used extensively in stucco work as plaster reinforcement over
interior masonry walls as well as in steel column fireproofing. Both
Regular and Self-Furring Diamond Mesh Lath are widely used as
reinforcement for base coats in ceramic tile work. This versatile
product features many benefits:
Fabricated from hot-dipped galvanized steel
Available in both regular and self-furring
Used in many applications
Certification
Phillips Regular and Self-Furring Diamond Mesh Lath meets or
exceeds ASTM C 847 Standard Specification for Metal Lath*.
Storage
Avoid damage and store in a dry place protected from moisture.
Installation Recommendations
Phillips recommends installation in accordance with applicable ASTM
standards and using prevalent industry standards. Reference materials
include ASTM C 841, Gypsum Association GA-600 and Phillips
Manufacturing’s website (www.phillipsmfg.com
).
Made in the U.S.A.
Phillips is proud that all our beads, trims and accessories, including Phillips Regular and Self-Furring Diamond Mesh
Lath, are made in the United States of America.
Submittal Approvals:
Job Name: _________________________________________________________________
Contractor: __________________________________________ Date: _________________
/
