Page is loading ...
ASSEMBLY INSTRUCTIONS
CAUTION: Please read these assembly instructions fully BEFORE attempting to assemble this cart.
Failure to comply with these instructions may result in injury. Do not load the folding cart with more
than 75kg. Always distribute payload evenly over the surface of the cart.
Save these instructions for further reference.
Warning:
This cart is not a toy. Do not allow children to play with this cart at any time.
Do not exceed maximum load capacity 75kg on level ground.
WHAT’S IN THE BOX?
PARTS LIST
Check that all parts are included with your folding cart prior to assembly.
Plastic clip x 1 fitted.
Wheels x 4.
Frame x 1 assembled.
Canvas bag x 1.
Bolts/washers/nuts x 4.
FOLDING
CAR T
02138
DRAPER TOOLS LTD, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HANTS. SO53 1YF. U.K. drapertools.com e-mail: [email protected]
SRDH1117
ASSEMBLY - STEP 1
Fix the wheels into wheel bracket
by using bolts/washers/nuts .
Tighten bolt fully and then loosen one
half turn for easier wheel movement.
Place canvas bag into frame .
Place handle into middle of plastic clip.
ATTENTION: THE HANDLE OF THE CART
MUST PASS THROUGH THE HANDLE OF
CANVAS LINER. HOOK AND LOOP MUST
BE SECURELY FIXED TOGETHER.
ASSEMBLY - STEP 2
/