1.
2.
4.
3.
1.
2.
1.
2.
3.
4.
5.
6.
1.
2.
Support Information Accessories
HRC-3100
Quick Start Guide
EUROTECH GROUP HEADQUATERS
EUROTECH S.p.A.
Via F. Solari, 3/A - 33020 AMARO (UD) - ITALY
tel: +39.0433.485 411 - fax: +39.0433.485 499
e-mail: [email protected]
www.eurotech.com
For more information about the HRC-3100
Visit the www.eurotech.com
Setting up and using the HRC-3100
Download and read HRC-3100 User Guide
Accessories
HRC-3100 Battery Pack
HRC-3100 Simple Docking Station
Travel Plug
Carrying Plug (pack of 10 pcs)
Belt Loop (pack of 10 pcs)
Neck Strap (pack of 10 pcs)
USB Cable mini-A/A (receptacle)
USB Cable mini-B/A (plug)
Power Supply Adapter 5V w/ EU, UK, US plugs
HRC-3100 Screen Protector (pack of 50 pcs)
HRC-3100 Stylus (pack of 40 pcs)
HRC-3100 Battery Pack Charger (4 positions)
HRC-3100 MPS Small (28 positions)
HRC-3100 MPS Large (70 positions)
HRC-3100 Simple Docking Station
Insertion and Removal
● To insert, slide the device into cradle (1).
Correct device fixation is indicated by
click sound of the lock mech
anism.
● To remove the device from the cradle,
first press Lock Release Button (2).
HRC-3100 Battery Pack
Removal and Insertion
● To remove Battery pack from the device
unscrew battery lock screw (1)
lift the battery lock lever in direction shown
(2) and release battery pack from the device
(3).
● To insert Battery Pack, align the tabs
of Battery Pack with guides in the battery
pack compartment and click-in Battery Pack
(4).
Carrying/Travel Plug
Insertion and Removal
● To attach the device with Plug, turn
Plug Strap on the side (1), slide the Plug
into the device (2) and turn back Plug Strap
into original position (3)
● To detach the device from the Plug turn
Plug Strap on the side (4), press upper lock
button with fingers (5) and remove the Plug
(6)
Memory Card
Insertion and Removal
● Remove battery pack from the device and
slide the miniSD card into card slot
● To remove miniSD card from the slot,
lightly press the card and release.
(card slot is push/push type)
Belt Loop, Neck Stripe
Insertion and Removal
● To attach Neck strap or Belt Loop to Plug
slide in clip
● To detach, press button on the clip (1)
and remove it from the clamp (2)
Power:
● Orange LED - device is being charged,
when connected to the external power.
● Green LED- device is fully charged,
when connected to the external power.
WLAN status:
● Orange LED flashes, when connecting
to the network.
● Orange LED is ON, when connected.
WLAN
System
Power/ Charging
Suspend button
to switch device Suspend/Run.
Reset Button
if a reset is needed
● SOFT reset - shortly press the reset button
Performing Soft Reset, all your data in RAM
memory will be erased. All running programs
will be closed.
● HARD reset - press the reset button
for a 3 sec.
Performing Hard Reset, all your data in RAM
memory and RAM file system will be erased.
Also the registry settings will be restarted
to factory settings.
Suspend Button
Reset Button
Features Getting started LED Indicators Switch Suspend/Run, Reset
Earphone
2,8” QVGA Display
with touch panel
Action Keys
2x2
Action Keys
Enter/Scan
Action Key
LED
Indicators
Buzzer
Microphone
1. Charge the HRC-3100
On delivery the HRC-3100 is in
Power off mode. Therefore before using
the device it is necessary to charge it
via an external power source.
● Charging with
HRC-3100 Simple Docking Station
and Power Supply Adapter 5V
● Charging with Travel Plug
and Power Supply Adapter 5V
2. Install ActiveSync
/ Mobile Device Centre
from www.microsoft.com
● MS Windows 2000 or MS Windows XP user
download ActiveSync v3.7 and higher
● MS Windows Vista or MS Windows 7 user
download Mobile Device Centre
Follow installation instructions provided by
Microsoft.
3. Connect the HRC-3100
to a host Computer
4. Create a partnership
Follow onscreen instructions to establish
connection between HRC-3100
and host computer
Suspend button
Reset button
Bar code
reader
Stylus
Tether
Tab
Action Keys
2x2
Battery lock
lever
Battery Pack
Docking contacts
All Action keys and Enter/Scan button
are free programmable.
/