Hampton Bay EP675BA User guide

1

INSTRUCTION MANUAL

Up-light

Brushed Steel Finish (BA)

Black Finish (BK)

Home Depot SKU 585-880 (UPC 008938767521) BA USA

Home Depot SKU 485-906 (UPC 008938767521) BA CAN

Home Depot SKU 485-865 (UPC 008938767583) BK CAN

2

Thank you for purchasing this Hampton Bay portable lamp. This product has

been manufactured with the highest standards of safety and quality.

FEATURES:

1. This convenient portable up-light was designed to provide light to various

areas.

2. 5ft 4in. power cord with rotary ON/OFF dimmer switch and polarized

plug included.

3. Designed to accommodate a 35 watt MAX, GU10 shielded bulb.(Included

for USA)

4. Includes a tip over kill switch in the base of lamp.

QUESTIONS, PROBLEMS, MISSING PARTS:

Before returning to your local Home Depot, please call our Customer Service

Team at 1-877-527-0313 or visit www.homedepot.com. Please reference your

SKU 585-880, UPC 008938767521 or SKU 485-906, UPC 008938767521 or

SKU 485-865, UPC 008938767583.

IMPORTANT SAFETY INSTRUCTIONS

This portable luminaire has a polarized plug (one blade is wider than the other)

as a feature to reduce the risk of electric shock. This plug will fit in a polarized

outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.

If it still does not fit, contact a qualified electrician. Never use with an

extension cord unless plug can be fully inserted. Do not alter the plug.

WARNING – to reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE

TO EXCESSIVE UV RADIATION, OR INJURY TO

PERSONS:

1. Lighted Lamp is HOT

2. Turn off/unplug and allow to cool before replacing bulb (lamp).

3. Bulb (lamp) gets HOT quickly! Make contact with the switch/plug only

when turning the lamp on and off.

4. Do not touch hot lens, guard, or enclosure.

5. Do not remain in light if skin feels warm.

6. Do not look directly at lighted bulb.

7. Keep lamp away from materials that may burn.

8. Do not touch the bulb at any time. Use a soft cloth. Oil from skin may

damage bulb.

9. Use only with a GU10 shielded 120V Halogen bulb 35-watt max.

10. Keep at least 6 inches from curtains, furniture or any combustible

materials.

11. Do not lamp fixture in excess of the rating sticker found inside of fixture.

12. Keep away from wet or damp locations.

TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION

(not included):

Gloves

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):

x1 GU10 Bulb

3

Dimmer switch

Base

Lamp housing

GU10 bulb

Housing cap

INSTALLATION INSTRUCTIONS (see diagram):

1. Place fixture on level surface to prevent tip over.

2. Remove the housing cap.

3. Install the GU10 Bulb.

4. Replace the housing cap.

NOTE: Be sure that the housing cap is tight & secure after installing the bulb.

5. Plug the lamp into a 120 volt polarized outlet.

6. Use the switch to turn the unit on/off or dim the light.

CAUTION: As a safety feature, this up-light will automatically shut off when

it is tipped over. When placed back in an upright position on a stable surface,

the fixture will light again.

INSTALLATION INSTRUCTIONS DIAGRAM:

4

TROUBLESHOOTING:

Problem Possible Cause Corrective Action

1. Light bulb is

burned out.

1. Replace light bulb.

2. Power is off.

2. Make sure power supply is on by

checking the switch and the breaker.

3. Lamp is not on a

stable surface in an

upright position

3. Move Lamp to a stable surface in

an upright position

Light bulb will

not illuminate.

4. Faulty switch. 4. Test or replace switch.

PRODUCT MAINTENANCE:

1. To clean the interior and the exterior of the fixture, unplug the power cord

from the 120 volt outlet. Use a dry or slightly, water dampened cloth to

wipe the surfaces of the fixture.

2. Allow the fixture to dry thoroughly before plugging it back in.

3. To clean the light bulb, allow the bulb to cool and use a dry soft cloth and

wipe/dust off carefully.

CAUTION: DO NOT use any cleaners with chemicals, solvents or harsh

abrasives as damage or fading to the finish may occur.

LIMITED WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in

materials and workmanship for a period of one (1) year(s) from date of

purchase. This warranty applies only to the original consumer purchaser and

only to products used in normal use and service. If this product is found to be

defective, the manufacturer’s only obligation, and your exclusive remedy, is

the repair or replacement of the product at the manufacturer’s discretion,

provided that the product has not been damaged through misuse, abuse,

accident, modifications, alterations, neglect or mishandling. This warranty

shall not apply to any product that is found to have been improperly installed,

set-up, or used in any way not in accordance with the instructions supplied

with the product. This warranty shall not apply to a failure of the product as a

result of an accident, misuse, abuse, negligence, alteration, or faulty

installation, or any other failure not relating to faulty material or workmanship.

This warranty shall not apply to the finish on any portion of the product, such

as surface and/or weathering, as this is considered normal wear and tear. The

manufacturer does not warrant and specially disclaims any warranty, whether

express or implied, of fitness for a particular purpose, other than the warranty

contained herein. The manufacturer specifically disclaims any liability and

shall not be liable for any consequential or incidental loss or damage,

including but not limited to any labor / expense costs involved in the

replacement or repair of said product.

Page is loading ...

Hampton Bay EP675BA User guide

Hampton Bay EP675BA User guide

in other languages

Related papers

Other documents