1
INSTRUCTION MANUAL
Up-light
Brushed Steel Finish (BA)
Black Finish (BK)
Home Depot SKU 585-880 (UPC 008938767521) BA USA
Home Depot SKU 485-906 (UPC 008938767521) BA CAN
Home Depot SKU 485-865 (UPC 008938767583) BK CAN
2
Thank you for purchasing this Hampton Bay portable lamp. This product has
been manufactured with the highest standards of safety and quality.
FEATURES:
1. This convenient portable up-light was designed to provide light to various
areas.
2. 5ft 4in. power cord with rotary ON/OFF dimmer switch and polarized
plug included.
3. Designed to accommodate a 35 watt MAX, GU10 shielded bulb.(Included
for USA)
4. Includes a tip over kill switch in the base of lamp.
QUESTIONS, PROBLEMS, MISSING PARTS:
Before returning to your local Home Depot, please call our Customer Service
Team at 1-877-527-0313 or visit www.homedepot.com. Please reference your
SKU 585-880, UPC 008938767521 or SKU 485-906, UPC 008938767521 or
SKU 485-865, UPC 008938767583.
IMPORTANT SAFETY INSTRUCTIONS
This portable luminaire has a polarized plug (one blade is wider than the other)
as a feature to reduce the risk of electric shock. This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not alter the plug.
WARNING – to reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE
TO EXCESSIVE UV RADIATION, OR INJURY TO
PERSONS:
1. Lighted Lamp is HOT
2. Turn off/unplug and allow to cool before replacing bulb (lamp).
3. Bulb (lamp) gets HOT quickly! Make contact with the switch/plug only
when turning the lamp on and off.
4. Do not touch hot lens, guard, or enclosure.
5. Do not remain in light if skin feels warm.
6. Do not look directly at lighted bulb.
7. Keep lamp away from materials that may burn.
8. Do not touch the bulb at any time. Use a soft cloth. Oil from skin may
damage bulb.
9. Use only with a GU10 shielded 120V Halogen bulb 35-watt max.
10. Keep at least 6 inches from curtains, furniture or any combustible
materials.
11. Do not lamp fixture in excess of the rating sticker found inside of fixture.
12. Keep away from wet or damp locations.
TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION
(not included):
Gloves
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
x1 GU10 Bulb
3
Dimmer switch
Base
Lamp housing
GU10 bulb
Housing cap
INSTALLATION INSTRUCTIONS (see diagram):
1. Place fixture on level surface to prevent tip over.
2. Remove the housing cap.
3. Install the GU10 Bulb.
4. Replace the housing cap.
NOTE: Be sure that the housing cap is tight & secure after installing the bulb.
5. Plug the lamp into a 120 volt polarized outlet.
6. Use the switch to turn the unit on/off or dim the light.
CAUTION: As a safety feature, this up-light will automatically shut off when
it is tipped over. When placed back in an upright position on a stable surface,
the fixture will light again.
INSTALLATION INSTRUCTIONS DIAGRAM:
4
TROUBLESHOOTING:
Problem Possible Cause Corrective Action
1. Light bulb is
burned out.
1. Replace light bulb.
2. Power is off.
2. Make sure power supply is on by
checking the switch and the breaker.
3. Lamp is not on a
stable surface in an
upright position
3. Move Lamp to a stable surface in
an upright position
Light bulb will
not illuminate.
4. Faulty switch. 4. Test or replace switch.
PRODUCT MAINTENANCE:
1. To clean the interior and the exterior of the fixture, unplug the power cord
from the 120 volt outlet. Use a dry or slightly, water dampened cloth to
wipe the surfaces of the fixture.
2. Allow the fixture to dry thoroughly before plugging it back in.
3. To clean the light bulb, allow the bulb to cool and use a dry soft cloth and
wipe/dust off carefully.
CAUTION: DO NOT use any cleaners with chemicals, solvents or harsh
abrasives as damage or fading to the finish may occur.
LIMITED WARRANTY
The manufacturer warrants this lighting fixture to be free from defects in
materials and workmanship for a period of one (1) year(s) from date of
purchase. This warranty applies only to the original consumer purchaser and
only to products used in normal use and service. If this product is found to be
defective, the manufacturer’s only obligation, and your exclusive remedy, is
the repair or replacement of the product at the manufacturer’s discretion,
provided that the product has not been damaged through misuse, abuse,
accident, modifications, alterations, neglect or mishandling. This warranty
shall not apply to any product that is found to have been improperly installed,
set-up, or used in any way not in accordance with the instructions supplied
with the product. This warranty shall not apply to a failure of the product as a
result of an accident, misuse, abuse, negligence, alteration, or faulty
installation, or any other failure not relating to faulty material or workmanship.
This warranty shall not apply to the finish on any portion of the product, such
as surface and/or weathering, as this is considered normal wear and tear. The
manufacturer does not warrant and specially disclaims any warranty, whether
express or implied, of fitness for a particular purpose, other than the warranty
contained herein. The manufacturer specifically disclaims any liability and
shall not be liable for any consequential or incidental loss or damage,
including but not limited to any labor / expense costs involved in the
replacement or repair of said product.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
