Assembly Instructions for 43" Extension Drapery Rod – 1” Diameter
1. Rod comes with a bushing.
2. insert the bushing into the larger rod of the set..
3. Insert the extension rod into the end with the bushing.
4. There rods should overlap by 4 inches or more.
5. When mounting the now 3 piece rod set, place one bracket in the middle and one on
each end.
-
1
The Artifactory 8912-22 Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI