Mi Xiaomi User manual

Brand: Mi

Model: Xiaomi

Category: Air purifiers

Type: User manual

Mi Xiaomi Smart Air Purifier 4 Pro effectively removes harmful particles, including dust, pollen, and bacteria, from the air in your home, creating a healthier and more comfortable living environment. It features a laser particle sensor for real-time air quality monitoring, allowing you to adjust the purification settings accordingly. With its sleek and modern design, the Mi Xiaomi air purifier seamlessly blends into your home décor, while its user-friendly controls and intuitive display make it easy to operate.

Xiaomi Smart Air Purifier 4 Pro User Manual

WARNING

READ AND SAVE THESE INSTRUCTIONS

· When the power cord is damaged, it must be replaced with a genuine

power cord purchased from the manufacturer or after-sales service

department.

· This appliance can be used by children aged from 8 years and above

and persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and understand

the hazards involved.

· Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

· Make sure the purifier is turned off and unplugged before performing

the maintenance. Fix the grille with screw after cleaning fan blades and

air duct.

· This appliance has a polarized plug (one blade is wider than the other).

To reduce the risk of electric shock, this plug is intended to fit in a

polarized outlet only one way. If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician. Do

not attempt to defeat this safety feature.

· To reduce the risk of fire or electric shock, do not use this appliance with

any solid-state speed control device.

Precautions

· Turn off and unplug the purifier before moving it.

· The purifier cannot turn on when the fan grille and the filter compartment cover are not installed properly.

· Maintain a distance of at least 20 cm between the air inlets and walls or other objects.

· The purifier must be placed on firm and flat floor.

· Prior to cleaning or other maintenance, the appliance must be disconnected from the supply mains.

· Frequently remove dust, hair, and other particles from the outer mesh screen of the filter, so as to reduce the chance of

bacteria growth.

· Remove dust, hair, and particles from the purifier's air inlets to prevent a reduction of air intake.

· Cover the air outlet to prevent dust, hair, and other particles from falling in when the purifier is left unused for a long time.

To avoid fire, electric shocks, or other damage, use the power cord and electrical outlet as instructed below:

· Do not excessively pull, twist or bend the power cord, as this may expose or break the cord's core.

· The power cord must be plugged into a suitable electrical outlet.

· Use the power cord that is provided with the purifier, do not use any third party power cords.

· Always unplug the purifier before carrying out maintenance to or moving the air purifier.

· Immediately stop using the purifier when it makes unusual sounds, gives off bad odors, overheats, or its fan rotates

irregularly.

· Do not stick your fingers or foreign objects into the protective parts, movable parts, air inlets, or air outlets.

· Keep objects such as hairs or fabrics away from the purifier to avoid blocking the air inlets or air outlets.

· Do not sit on, lean on or tilt the purifier.

· When using in conjunction with gas-fueled appliances (such as gas stoves, gas heaters), please ventilate sufficiently to avoid

carbon monoxide poisoning.

· Do not pour liquids, nor throw powders or other small substances into the purifier's air outlet.

Do not use the purifier in the following circumstances, as they may result in electric shocks, fire, or other damage:

· Near open flames, such as candles, incense burners, stoves, fireplaces, cigarettes, firecrackers, lighters, multipurpose

torches, candle lighters, or fire pans.

· Near appliances that generate high temperatures, such as electric heaters, fan heaters, electric foot warmers, electric stoves,

or electric irons.

· Make sure no inflammable objects get into the purifier.

· In unstable locations where the purifier can easily fall over.

· In environments that are extremely hot, humid, or damp, such as bathrooms.

025

Product Overview

Display On/Off

Button

Laser Particle

Sensor

Filter

Compartment

Cover

Power Port

Temperature and

Humidity Sensor

Display

Front View Rear View

Grille

Read this manual carefully before use, and retain it for future reference.

Note: Illustrations of the product, accessories, and user interface in this user manual are for reference purposes only. The actual product and

functions may vary due to product enhancements.

Power Button

Mode Switch

Button

Cover (remove

the grille from

here)

Product Overview

Display Instructions

Power Button

Mode Switch Button

Temperature

Humidity

PM2.5 Value

Mode

Coarse Particles Indicator

Wi-Fi Indicator

Negative Ion Indicator

Air Quality Indicator

The indicator will display green, yellow,

orange or red according to the PM2.5

value.

025

Automatic: Automatically switch modes

according to the indoor air quality.

Sleep: Ultra-low noise for a comfortable

sleeping environment.

Low speed

ExcellentGoodModeratePoor

Medium speed

High speed

Manual: Set and save the coverage

area in the app to adjust the purifying

efficiency.

Green

Yellow

Orange

Red

1-20 μg/m3

21-35 μg/m3

36-55 μg/m3

>55 μg/m3

The negative ion function is enabled by default. The purifier can generate

negative ions when it is working, and then the negative air ions (NAI) are

produced through the reaction between the negative electron and the oxygen

molecules. NAI is very good at trapping certain air pollutants.

The function can be enabled or disabled in the app. When it is enabled, the

negative ion indicator is on; when it is disabled, the indicator is off.

Note: Coarse particles have an aerodynamic diameter

ranging from 2.5 to 10 µm (PM10–PM2.5). Examples of

coarse particles include dust, pollen, spores, and fly

ash.

Installation

Placing the purifier Connecting to an electrical outlet

For optimal performance, make sure the distances

between purifier's air inlets and other objects

such as walls meet the requirements as suggested

below.

Connect the power cord to the power port at the

bottom of the purifier and then plug it into an

electrical outlet.

7.9 inches

Note: It is recommended to keep doors and windows closed for a better purifying effect when using the purifier.

Tap the power button to turn

on the purifier.

While the purifier is on, tap

the power button to turn it

off.

The display will show the remaining service time

of the filter when the purifier is turned on.

The display will show a warning icon if no genuine

filter is detected.

Filter service

time remaining

notification

Not a genuine filter

warning

While the purifier is on, tap

the mode switch button to

cycle through modes.

Press the display on/off button to cycle through

its brightness levels: on, dim, and off.

When connecting the purifier to the app for the first

time or unable to connect to it, press and hold the

display on/off button for 7 seconds. The purifier will

make a notification sound once Wi-Fi is successfully

reset.

How to Use

Turning on/off

Filter life notification

Switching mode Adjusting the display's brightness

Resetting Wi-Fi

025

Press and hold the mode switch button for 7

seconds to enable or disable the child lock

function. The purifier will make the corresponding

notification sound and show the corresponding

icon on the display.

Enabling/disabling the child lock function

025

Simultaneously press and hold the mode switch button

on the display and the brightness adjustment button for

15 seconds. The purifier will make a notification sound

and the Wi-Fi will be disabled.

While Wi-Fi is off, simultaneously press and hold the

mode switch button on the display and the brightness

adjustment button for 15 seconds. The purifier will make

a notification sound and the Wi-Fi will be enabled.

· Press the indentation on the cover to open it. Use

a screwdriver to loosen the screw, and then pull the

cover upwards to remove the grille.

· Use a vacuum cleaner to remove any dust from the

air duct and fan blades, or wipe the dust off gently

with a soft cloth.

· Use a brush or soft cloth to gently wipe the negative

ion transmitter.

· Install the grille back and fasten the screw after

cleaning.

How to Use Daily Care & Maintenance

Enabling/Disabling Wi-Fi

Cleaning fan blades and air duct

Warning: Make sure the purifier is turned off and unplugged

before performing the following operations.

Note: To avoid damaging the purifier, do not rinse or spray

the air duct and fan blades directly with water, or wipe them

with a soaking wet cloth.

Note: To avoid missing, the screw is not removable. Loosen

the screw to remove the grille.

Connect with Mi Home / Xiaomi Home App

Scan the QR code to download and install the app. You

will be directed to the connection setup page if the app

is installed already. Or search "Mi Home / Xiaomi Home"

in the app Store to download and install it.

Open Mi Home / Xiaomi Home app, tap "+" on the upper

right, and then follow prompts to add your device.

*The app is referred to as Xiaomi Home app in Europe

(except for Russia). The name of the app displayed on

your device should be taken as the default.

Note: The version of Mi Home app might have been

updated, please follow the instructions based on the

current app version.

This product works with Mi Home / Xiaomi Home app*.

Control your device with Mi Home / Xiaomi Home app.

Negative Ion

Transmitter

Daily Care & Maintenance

To ensure optimal ventilation and purification, use

a vacuum cleaner to remove any dust from the air

inlets and the filter compartment, or wipe these

areas gently with a soft cloth.

Use a non-sharp tool to open the cover of the laser

particle sensor, then use an air blow gun or hair dryer

to clean the filter on the cover and the sensor, as

illustrated in the figure.

Cleaning the filter compartment Cleaning the laser particle sensor

Note: To avoid damaging the purifier, do not rinse or spray

the filter compartment directly with water, or wipe it with

a soaking wet cloth.

Note: Do not use hot air.

Specifications

*Calculated according to standard GB/T 18801-2015

Name: Xiaomi Smart Air Purifier 4 Pro

Model: AC-M15-SC

Item Dimensions: 10.8 × 10.8 × 26.7 inches

Net Weight: Approx. 15 lbs

Effective Coverage: 35–60 m2 *

Rated Voltage: 120 V~

Rated Frequency: 60 Hz

Rated Power: 50 W

Noise Level: ≤65 dB(A)

Particle Purification Efficiency: High

Formaldehyde Purification Efficiency: High

Particle's Clean Air Delivery Rate (CADR Particle): 500 m3/h

Formaldehyde's Clean Air Delivery Rate (CADR Formaldehyde): 185 m3/h

Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz

5021236

Conforms to UL Std. 867

FCC ID: 2AP98-ACM15SC

Contains FCC ID: 2AC7Z-ESPWROOM32D

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Limited by local law regulations, version for North America does not have region selection option.

To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the

antenna of this device and persons during device operation.

To ensure compliance, operations at closer than this distance is not recommended.

Manufactured by: Beijing Smartmi Electronic Technology Co., Ltd.

(a Mi Ecosystem company)

Address: Room 201-203, Unit 6, Building A, No. 66, Zhufang Road, Qinghe, Haidian District, Beijing

For further information, please go to www.mi.com

For detailed e-manual, please go to www.mi.com/global/service/userguide

V-20210726-Y

Instrukcja pobrana ze strony loveair.pl

Mi Xiaomi User manual

Brand: Mi

Model: Xiaomi

Category: Air purifiers

Type: User manual

Download PDF

report

Mi Xiaomi User manual

Mi Xiaomi User manual

Related papers

Other documents