The Rode 301-950-1-2 Lavalier microphone offers reliable and discreet audio capture for various applications, including presentations, live performances, and religious services. Its miniature size, stainless steel construction, and low handling noise make it suitable for close-up use. With the MiCon™ connector system, it seamlessly integrates with a range of wireless systems, and the included accessories like the pop filter and mini-furry ensure quality recordings in challenging environments.
The Rode 301-950-1-2 Lavalier microphone offers reliable and discreet audio capture for various applications, including presentations, live performances, and religious services. Its miniature size, stainless steel construction, and low handling noise make it suitable for close-up use. With the MiCon™ connector system, it seamlessly integrates with a range of wireless systems, and the included accessories like the pop filter and mini-furry ensure quality recordings in challenging environments.
INSTRUCTION MANUAL
www.rodemic.com
301-950-1-2_lavalier_manual.indd 1301-950-1-2_lavalier_manual.indd 1 1/27/2011 3:08:25 PM1/27/2011 3:08:25 PM
301-950-1-2_lavalier_manual.indd 2301-950-1-2_lavalier_manual.indd 2 1/27/2011 3:08:47 PM1/27/2011 3:08:47 PM
- 3 -- 3 -
INTRODUCTION
Thank you for investing in the Lavalier microphone.
Whether you’re presenting for television or live on-stage,
in a 20,000 seat auditorium or in a house of worship,
has your needs covered with the reliable and discreet Lavalier.
Featuring the pure, clear audio and low handling noise that
is celebrated for, the Lavalier is built to deliver and
to last.
The included water resistant pop fi lter and mini-furry for
high wind protection ensure quality recordings in adverse
environments, while the anti-trauma water resistant case
provides rugged and secure protection for the microphone,
cable and accessories.
Knowing that versatility is paramount in any product, we at
have developed the MiCon™ connector system
which provides seamless integration between the Lavalier
and a wide range of wireless systems.
Please take the time to visit www.rodemic.com and register
your microphone for warranty.
Peter Freedman
Microphones
Sydney, Australia
301-950-1-2_lavalier_manual.indd 3301-950-1-2_lavalier_manual.indd 3 1/27/2011 3:08:47 PM1/27/2011 3:08:47 PM
FEATURES
- 4 -
ERGONOMIC DESIGN
• Ultra discreet appearance
• Incorporated cable management system
HIGH QUALITY PERFORMANCE
• Ø4.5mm (Ø0.177”) miniature microphone
• Corrosion resistant stainless steel
• Low handling noise
UNIVERSAL COMPATIBILITY
• RØDE MiCon™ connector system provides seamless
integration with a wide range of wireless systems while
maintaining discreet and unobtrusive appearance
• Gold plated connections
301-950-1-2_lavalier_manual.indd 4301-950-1-2_lavalier_manual.indd 4 1/27/2011 3:08:48 PM1/27/2011 3:08:48 PM
- 5 -
LAVALIER & ACCESSORIES
- 5 -
1. RØDE Lavalier (microphone head)
2. Anti-trauma water resistant storage case
3. Water resistant pop fi lter
4. Mini-furry for high wind protection
5. Shielded, detachable Kevlar® reinforced cable
6. Lapel-style cable management clip
7. Adjustment tools
8. Sanitary cleansing wipes
Compact, interchangeable MiCon™ adaptors available to
suit industry standard wireless systems*
*MiCon™ adaptors sold separately -
see rodemic.com/lavalier for a full list of compatibility
1.
2.
5. 4.
8.
3.
7.
6.
301-950-1-2_lavalier_manual.indd 5301-950-1-2_lavalier_manual.indd 5 1/27/2011 3:08:48 PM1/27/2011 3:08:48 PM
SPECIFICATIONS
- 6 -
Acoustic Principle: Permanently polarised condenser
Directional Pattern: Omni-directional (see graph)
Frequency Range: 60 Hz ~ 18 KHz
(see graph)
Output Impedence: 3k Ω Typical
Signal To Noise Ratio: 69 dB
Equivalent Noise: 25 dBA SPL
(per IEC651)
Clipping SPL: 110 dB
Maximum Output: 189 mV**
Sensitivity: -33.5 dB re 1 V/Pa
(21 mV @ 94 dB SPL)
± 3 dB @ 1 kHz
Dynamic Range: 85 dB Typical**
Power Requirements: Min 2 V ~ Max 5 V through RØDE
wireless adaptors
P48 through RØDE XLR adaptor
Output Connection: RØDE MiCon™ connector
301-950-1-2_lavalier_manual.indd 6301-950-1-2_lavalier_manual.indd 6 1/27/2011 3:08:50 PM1/27/2011 3:08:50 PM
- 7 -
SPECIFICATIONS
- 7 -
** Calculated from maximum SPL peak before clipping.
All measurements are calculated when powered at 5 V or P48 (RØDE XLR adaptor)
dB re 1 V/Pa
20
10
0
-10
-20
-30
20Hz 100 1000 10 000 20 000
-2.0
-20.0
-10.0
0.0
-2.0
-4.0
-6.0
-8.0
-10.0
-12.0
-14.0
-16.0
-18.0
-20.0
-22.0
-24.0 -25.0
dB rel. 1V/Pa
+5.0
Frequency:
500 Hz:
1000 Hz:
4000 Hz:
FREQUENCY RANGE
POLAR RESPONSE
301-950-1-2_lavalier_manual.indd 7301-950-1-2_lavalier_manual.indd 7 1/27/2011 3:08:50 PM1/27/2011 3:08:50 PM
MIC PLACEMENT
- 8 -
For the best performance, the Lavalier microphone should
be positioned as close as possible to the sound source,
without being subject to clothing rustle, gusts of air or dust.
Also ensure the mic is pointed as much as is convenient
towards the user’s mouth.
At times it may be best to test different placements to
provide the optimal combination of sound quality and
discretion.
Position the microphone close to the sound source
301-950-1-2_lavalier_manual.indd 8301-950-1-2_lavalier_manual.indd 8 1/27/2011 3:08:50 PM1/27/2011 3:08:50 PM
- 9 -
FITTING AND CABLING
- 9 -
To fi t your Lavalier onto clothing and connect to your
wireless system, fi rst securely fasten one end of your
MiCon™ cable to the Lavalier. The RØDE spanner can assist
you in this assembly.
Next, mount the Lavalier into the provided lapel clip. Hold
the clip between two fi ngers, with one fi nger pressing down
on the end of the wire loop. This will create enough leeway
to insert your Lavalier through the wire.
Screw the microphone to your MiCon™ Cable
Press open the wire loop on the lapel clip
301-950-1-2_lavalier_manual.indd 9301-950-1-2_lavalier_manual.indd 9 1/27/2011 3:08:51 PM1/27/2011 3:08:51 PM
FITTING AND CABLING
- 10 -
Rest the mic in the loop so that the wire encircles one of the
grooves on the mic’s body. Once you ease off your grip on
the wire, the microphone will be held securely in place.
To prevent tangling, clip the cable into the groove on
the lapel clip. Then the clip is ready to be attached to an
appropriate part of the user’s clothing.
Rest the microphone in the wire loop and release wire
Clip the cable into the groove in your lapel clip
301-950-1-2_lavalier_manual.indd 10301-950-1-2_lavalier_manual.indd 10 1/27/2011 3:08:51 PM1/27/2011 3:08:51 PM
- 11 -
To connect your Lavalier to your wireless system, securely
fasten the corresponding adaptor to the other end of your
MiCon™ cable. The RØDE spanner can assist you in this
assembly.
The Lavalier‘s connections have been designed using the
RØDE MiCon™ connector system, which provides seamless
integration with a wide range of wireless systems, while
maintaining the mic’s discreet appearance. (MiCon™
adaptors sold separately – see rodemic.com/lavalier for a full
list of compatibility.)
Plug the adaptor into your wireless system and you’re ready
to go.
FITTING AND CABLING
- 11 -
RØDE MiCon™ cable and adaptor
MiCon™ CABLE
MiCon™ CONNECTION
MiCon™ ADAPTOR
301-950-1-2_lavalier_manual.indd 11301-950-1-2_lavalier_manual.indd 11 1/27/2011 3:08:52 PM1/27/2011 3:08:52 PM
INCLUDED ACCESSORIES
- 12 -
WATER RESISTANT POP FILTER
The pop fi lter is an optional attachment to your Lavalier
which reduces plosives (gusts of wind noise caused by hard
sounds such as ‘p’ or ‘t’).
It is also strongly recommended you use your pop fi lter to
protect the Lavalier in any extreme environments which are
overly dusty or moist, to prevent damage to the mic.
To correctly fi t your pop fi lter, slide the fi lter over the Lavalier
until it reaches the fi rst groove. Pushing the fi lter any further
down will result in decreased protection of the capsule.
Lavalier with pop fi lter
301-950-1-2_lavalier_manual.indd 12301-950-1-2_lavalier_manual.indd 12 1/27/2011 3:08:52 PM1/27/2011 3:08:52 PM
- 13 -
INCLUDED ACCESSORIES
- 13 -
MINI-FURRY
For increased wind protection, a mini-furry windshield
is provided with the Lavalier. The windshield is ideal for
situations such as outdoor performances, where wind noise
may distort the audio quality of the mic.
To fi t, simply slide the mini-furry straight over the Lavalier
until it reaches the fi rst groove. Ensure the fur is fl uffed up in
all directions for maximum effectiveness.
Lavalier with mini-furry
301-950-1-2_lavalier_manual.indd 13301-950-1-2_lavalier_manual.indd 13 1/27/2011 3:08:52 PM1/27/2011 3:08:52 PM
STORAGE & CARE
- 14 -
When not in use, always keep your Lavalier in the storage
case provided. Close and snap the storage case for
complete protection.
Inside the case, you will fi nd a sachet of moisture absorbent
crystals. Please retain these crystals and store with the
Lavalier to keep the microphone in ideal condition.
Eventually this pack of crystals will need to be dried. This
is indicated by the crystals turning pink in colour. They can
easily be re-used by placing them in an oven at 100-150
degrees Celsius for approximately ten minutes. The crystals
will operate effectively again once they have turned blue.
In some cases, such as when there are multiple users of the
Lavalier, you may wish to sanitise the microphone and cable.
To do this, use the provided Sanitary Cleansing Wipes to
wipe down the Lavalier surface. You may wish to detach the
microphone from the lapel clip and cable for easier access.
Please be mindful when cleaning the Lavalier not to let any
dust or moisture into the microphone capsule.
301-950-1-2_lavalier_manual.indd 14301-950-1-2_lavalier_manual.indd 14 1/27/2011 3:08:53 PM1/27/2011 3:08:53 PM
- 15 -
SUPPORT
- 15 -
If you experience any problem, or have questions regarding
your microphone, fi rst contact the dealer who sold it to you.
We have an extensive dealer network to assist you.
If you have diffi culty getting the advice or assistance you
require from the dealer, do not hesitate to contact us directly
via the details below.
INTERNATIONAL
107 Carnarvon Street
Silverwater NSW 2128 Australia
Ph: +61 2 9648 5855
Fax: +61 2 9648 2455
USA
P.O. Box 4189
Santa Barbara, CA 93140-4189
Ph: 805 566 7777
Fax: 805 566 0071
TECHNICAL SUPPORT
For information and technical support please visit
www.rodemic.com/support
301-950-1-2_lavalier_manual.indd 15301-950-1-2_lavalier_manual.indd 15 1/27/2011 3:08:53 PM1/27/2011 3:08:53 PM
301-950-1-2_lavalier_manual.indd 16301-950-1-2_lavalier_manual.indd 16 1/27/2011 3:08:53 PM1/27/2011 3:08:53 PM
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
The Rode 301-950-1-2 Lavalier microphone offers reliable and discreet audio capture for various applications, including presentations, live performances, and religious services. Its miniature size, stainless steel construction, and low handling noise make it suitable for close-up use. With the MiCon™ connector system, it seamlessly integrates with a range of wireless systems, and the included accessories like the pop filter and mini-furry ensure quality recordings in challenging environments.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
RODE Microphones LAVALIER User manual
-
-
RODE Microphones RØDELink Filmmaker Kit Quick start guide
-
-
JTS US-9001D User manual
-
Nady Systems 151VRHTSYSTEMH User manual
-
Sense SE-500-DEH-T Owner's manual
-
Binary SE-300-WT-HAND Owner's manual
-
-
Nady 351 User manual