Crystorama 8884-AG User manual

Type
User manual
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
®
ASSEMBLY INSTRUCTION MODEL #8884-AG
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
You will need 4-
40 Watts Recommended 60 Watts Max
Bulb not included
USE LED BULBS FOR EXTENDED USE
This fixture is DRY rated
How to Install
1.Attach the mounting bar to the outlet box.
18.5"
9.5"
24"
18.5"
18.5"
96"
2.Decide the preferred hanging height and choose the correct
length of chain needed.
3.Raise the fixture frame up over the ceiling and do the wire
connection. Secure the canopy over the outlet box using
the screw collar ring.
4.Place the shade over the candle sleeve and install the bulb.
Crystorama.com
Part Number
Part Numbers
PART NUMBER MODEL #8884-AG
A.Mounting Hardware
(1)Mounting Plate
(2)Wire Nut
B.(1)Screw Collar Loop
A
C
D
E
F
G
K
I
J
H
C.(1)Canopy;Ø5.8″x1.2″h;XMO8884AGCAN5.8IN
B
D.(1)Collar Ring
E.(2)Quick Link
F.(1)Chain;72″L x 5.0mmT;XMO8884AGCHA5MM
G.(1)Loop
H.(4)Fabric Shade;4″x4"x6.6″h;XMO8884SHA6.6IN
I.(4)Socket
J.(4)Crystal
K.(1)Fixture frame
Crystorama.com
  • Page 1 1
  • Page 2 2

Crystorama 8884-AG User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI